An official website of the United States government
Diamond electronics has attracted attention for high power and high frequency device applications. Cubic boron nitride (c-BN) may be considered as a suitable dielectric layer for electron channel diamond metal–insulator–semiconductor field effect transistors (MISFETs) provided that its valence band edge can be positioned above that of diamond. This study reports experimental measurement of the valence band offset (VBO) between c-BN and nitrogen-plasma terminated boron-doped diamond (111). Nitrogen plasma processing was used to produce C–N bonding at the diamond surface. Electron cyclotron resonance plasma enhanced chemical vapor deposition was then used to deposit epitaxial c-BN films on the N-terminated diamond substrate, as confirmed by cross-sectional high-resolution electron microscopy. X-ray and ultraviolet photoemission spectroscopies indicated that the valence band maximum of c-BN is positioned 0.4 eV above that of diamond resulting in a type II staggered band alignment. This result is consistent with theoretical predictions of the VBO between the two materials in the (111) surface orientation, indicating that c-BN with C–N interface bonding can be used as a dielectric layer for electron channel diamond (111) MISFET devices.
more »
« less
Mechanical properties of cubic boron nitride and diamond at dynamical pressure and temperature
We report the mechanical properties of cubic boron nitride (c-BN) and diamond under the combined impact of dynamical pressure and temperature, calculated using ab initio molecular dynamics. Our study revealed a pronounced sensitivity of the mechanical properties of c-BN to applied pressure. Notably, c-BN undergoes a brittle-to-ductile transition at ∼220 GPa, consistent across various dynamical temperatures, while diamond exhibits no such transition. Furthermore, the Vickers hardness profile for c-BN closely mirrors that of diamond across a spectrum of temperature–pressure conditions, highlighting c-BN's significant mechanical robustness. These results underscore the superior resilience and adaptability of c-BN compared to diamond, suggesting its potential as an ideal candidate for applications in extreme environments.
more »
« less
- Award ID(s):
- 2202101
- PAR ID:
- 10501539
- Publisher / Repository:
- AIP
- Date Published:
- Journal Name:
- Applied Physics Letters
- Volume:
- 123
- Issue:
- 23
- ISSN:
- 0003-6951
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Cubic boron nitride (c-BN), with a small 1.4% lattice mismatch with diamond, presents a heterostructure with multiple opportunities for electronic device applications. However, the formation of c-BN/diamond heterostructures has been limited by the tendency to form hexagonal BN at the interface. In this study, c-BN has been deposited on free standing polycrystalline and single crystal boron-doped diamond substrates via electron cyclotron resonance plasma enhanced chemical vapor deposition (ECR-PECVD), employing fluorine chemistry. In situ x-ray photoelectron spectroscopy (XPS) is used to characterize the nucleation and growth of boron nitride (BN) films as a function of hydrogen gas flow rates during deposition. The PECVD growth rate of BN was found to increase with increased hydrogen gas flow. In the absence of hydrogen gas flow, the BN layer was reduced in thickness or etched. The XPS results show that an excess of hydrogen gas significantly increases the percent of sp2 bonding, characteristic of hexagonal BN (h-BN), particularly during initial layer growth. Reducing the hydrogen flow, such that hydrogen gas is the limiting reactant, minimizes the sp2 bonding during the nucleation of BN. TEM results indicate the partial coverage of the diamond with thin epitaxial islands of c-BN. The limited hydrogen reaction is found to be a favorable growth environment for c-BN on boron-doped diamond.more » « less
-
Abstract The bottom of the lithosphere is characterized by a thermally controlled transition from brittle to ductile deformation. While the mechanical behavior of rocks firmly within the brittle and ductile regimes is relatively well understood, how the transition operates remains elusive. Here, we study the mechanical properties of pure olivine gouge from 100 to 500°C under 100 MPa pore‐fluid pressure in a triaxial deformation apparatus as a proxy for the mechanical properties of the upper mantle across the brittle‐ductile transition. We describe the mechanical data with a rate‐, state‐, and temperature‐dependent constitutive law with multiple thermally activated deformation mechanisms. The stress power exponents decrease from 70 ± 10 in the brittle regime to 17 ± 3 and 4 ± 2 in the semi‐brittle and ductile regimes, respectively. The mechanical model consistently explains the mechanical behavior of olivine gouge across the brittle‐ductile transition, capturing the gradual evolution from cataclasis to crystal plasticity.more » « less
-
Boron nitride (BN) is a member of Group III nitrides and continues to spark interest among the scientific community for its mechanical properties, chemical inertness, thermal conductivity, and electrical insulating properties. In this study, microwave plasma chemical vapor deposition is used to synthesize BN on silicon substrates. Feed gas mixtures of H2, NH3, and B2H6 are used for a range of systematically varied power, pressure, and flow rate conditions. Plasma optical emission from atomic boron is shown to increase nonlinearly by nearly a factor of five with decreasing chamber pressure in the range from 100 to 10 Torr. Copious amounts of atomic boron in the plasma may be beneficial under some growth conditions for producing high hardness boron-rich nitrides, such as B13N2, B50N2, or B6N, which, to date, have only been synthesized under high pressure/high temperature conditions. Despite the higher atomic boron emission in the plasma at low pressure, BN coatings grown at 15 Torr result in hexagonal BN (B/N ratio of 1), regardless of the B2H6 flow rate used in the range of 0.6–3.0 sccm.more » « less
-
null (Ed.)In this work, the formation of carbide with the concertation of carbon at 0.1 at.% in refractory high-entropy alloy (RHEA) Mo15Nb20Re15Ta30W20 was studied under both ambient and high-pressure high-temperature conditions. The x-ray diffraction of dilute carbon (C)-doped RHEA under ambient pressure showed that the phases and lattice constant of RHEA were not influenced by the addition of 0.1 at.% C. In contrast, C-doped RHEA showed unexpected phase formation and transformation under combined high-pressure and high-temperature conditions by resistively employing the heated diamond anvil cell (DAC) technique. The new FCC_L12 phase appeared at 6 GPa and 809 °C and preserved the ambient temperature and pressure. High-pressure and high-temperature promoted the formation of carbides Ta3C and Nb3C, which are stable and may further improve the mechanical performance of the dilute C-doped alloy Mo15Nb20Re15Ta30W20.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1063/5.0172885
