skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Troubleshooting the influence of trace chemical impurities on nanoparticle growth kinetics via electrochemical measurements
Title: Troubleshooting the influence of trace chemical impurities on nanoparticle growth kinetics via electrochemical measurements
Reproducibility issues resulting from particle growth solutions made with cetyltrimethylammonium bromide (CTAB) surfactant from different lots and product lines in a newly developed synthesis of monometallic palladium (Pd) tetrahexahedra (THH) nanoparticles are investigated via a multi-pronged approach. Time-resolved electrochemical measurements of solution potential, variation of chemical parameters in colloidal synthesis, and correlation to electrodeposition syntheses are used together to uncover the effects of the unknown contaminants on the chemical reducing environment during nanoparticle growth. Iodide—a known impurity in commercial CTAB—is identified as one of the required components for equalizing the reducing environment across multiple CTAB sources. However, an additional component—acetone—is critical to establishing the growth kinetics necessary to enable the reproducible synthesis of THH in each of the CTAB formulations. In one CTAB variety, the powdered surfactant contains too much acetone, and drying of the as-received surfactant and re-addition of solvent is necessary for successful Pd THH synthesis. The relevance of solvent impurities to the reducing environment in aqueous nanoparticle synthesis is confirmed via electrochemical measurement approaches and solvent addition experiments. This work highlights the utility of real-time electrochemical potential measurements as a tool for benchmarking of nanoparticle syntheses and troubleshooting of reproducibility issues. The results additionally emphasize the importance of considering organic solvent impurities in powdered commercial reagents as a possible shape-determining factor during shaped nanomaterials synthesis.  more » « less
Award ID(s):
2406130
PAR ID:
10504982
Author(s) / Creator(s):
; ; ; ; ; ;
Publisher / Repository:
Royal Society of Chemistry
Date Published:
Journal Name:
Nanoscale
ISSN:
2040-3364
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Nanoscale)
    Understanding the competing effects of growth-directing additives, such as halide ions, on particle formation in solution phase metal nanoparticle syntheses is an ongoing challenge. Further, trace halide impurities are known to have a drastic impact on particle morphology as well as reproducibility. Herein, we employ a “halide-free” platform as an analogue to commonly used halide-containing surfactants and metal precursors to isolate and study the effects of micromolar concentrations of halide ions (chloride, bromide, and iodide) on the rate of metal ion reduction. In the absence of competing halides from precursors and surfactants, we observe a catalytic effect of low concentrations of halide ions on the rate of metal ion reduction, an influence which is fundamentally different from the previously reported role of halides in metal nanoparticle growth. We propose that this halide-assisted metal ion reduction proceeds via the formation of a halide bridge which facilitates the adsorption of the metal precursor to a growing nanoparticle and, subsequently, electron transfer from the particle surface. We then demonstrate that this process is operative not only in the well-controlled “halide-free” platform, but also in syntheses involving high concentrations of halide-containing surfactants as well as metal precursors with halide ligands. Importantly, this study shows that halide-assisted metal ion reduction can be extended to bimetallic systems and provides a handle for the directed differential control of metal ion reduction in one-pot co-reduction syntheses. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, The Canadian Journal of Chemical Engineering)
    Abstract Silica nanoparticles (SiNPs) are promising drug delivery nanocarriers due to their tunable size, porous structure, and surface properties. This study compares two synthesis methods: (i) a low‐temperature aqueous sol–gel process yielding SiNPs of 500–700 nm, and (ii) a water‐in‐oil (W/O) microemulsion using either CTAB or TX‐100 surfactants. Surfactant selection significantly affected nanoparticle size, stability, and dispersity. Characterization by dynamic light scattering (DLS), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Brunauer–Emmett–Teller (BET), solid‐state nuclear magnetic resonance spectroscopy (ssNMR), X‐ray photoelectron spectroscopy (XPS), and photoluminescence analysis (PL) confirmed successful synthesis. The TX‐100‐mediated microemulsion method proved particularly effective in achieving highly stable, reproducible, and monodisperse SiNPs, with a size limit of approximately 100 nm, making them ideal candidates for drug encapsulation. Procaine (PRC) incorporation demonstrated the role of reverse micelle dynamics and surfactant‐stabilized interfaces in enhancing encapsulation efficiency. This work highlights the critical role of surfactant and medium selection in SiNPs synthesis, demonstrating their impact on nanoparticle stability, dispersity, and drug loading efficiency. The TX‐100‐mediated microemulsion technique emerges as a superior approach for producing stable, monodisperse SiNPs, advancing the design of nanocarriers for PRC drug delivery applications. 
    more » « less
  3. ; ; ; ; ; ; ; ; (, Green Chemistry)
    The first demonstration of aqueous surfactant-enabled Suzuki–Miyaura couplings run under flow conditions is described. In addition, use of an even more challenging heterogeneous nanoparticle catalyst, containing only 800 ppm of Pd ( i.e. , 0.08 mol%) in the form of Fe/ppm Pd nanoparticles, is sufficient using a continuous stirred-tank reactor (CSTR). 
    more » « less
  4. ; ; ; ; ; ; ; (, Angewandte Chemie International Edition)
    Abstract The electrochemical hydrogenation (e‐hydrogenation) of unsaturated compounds like imines or carbonyls presents a benign reduction method. It enables direct use of electrons as reducing agent, water as proton source, while bypassing the need for elevated temperatures or pressures. In this contribution, we discuss the active species in electrocatalytic reductive amination with the transformation of acetone and methylamine as model reaction. Surprisingly, lead impurities in the ppm‐range proved to possess a significant effect in e‐hydrogenation. Accordingly, the influence of applied potential and cathode material in presence of 1 ppm Pb was investigated. Finally, we transferred the insights to the reduction of acetone manifesting comparable observations as for imine reduction. The results suggest that previous studies on electrochemical reduction in the presence of lead electrodes should be re‐evaluated. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Nature Communications)
    Abstract Seed-mediated synthesis strategies, in which small gold nanoparticle precursors are added to a growth solution to initiate heterogeneous nucleation, are among the most prevalent, simple, and productive methodologies for generating well-defined colloidal anisotropic nanostructures. However, the size, structure, and chemical properties of the seeds remain poorly understood, which partially explains the lack of mechanistic understanding of many particle growth reactions. Here, we identify the majority component in the seed solution as an atomically precise gold nanocluster, consisting of a 32-atom Au core with 8 halide ligands and 12 neutral ligands constituting a bound ion pair between a halide and the cationic surfactant: Au32X8[AQA+•X-]12(X = Cl, Br; AQA = alkyl quaternary ammonium). Ligand exchange is dynamic and versatile, occurring on the order of minutes and allowing for the formation of 48 distinct Au32clusters with AQAX (alkyl quaternary ammonium halide) ligands. Anisotropic nanoparticle syntheses seeded with solutions enriched in Au32X8[AQA+•X-]12show narrower size distributions and fewer impurity particle shapes, indicating the importance of this cluster as a precursor to the growth of well-defined nanostructures. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email