An official website of the United States government
Direct write patterning of high-transition temperature (high-TC) superconducting oxide thin films with a focused helium ion beam is a formidable approach for the scaling of high-TC circuit feature sizes down to the nanoscale. In this letter, we report using this technique to create a sensitive micro superconducting quantum interference device (SQUID) magnetometer with a sensing area of about 100 square microns. The device is fabricated from a single 35-nm thick YBa2Cu3O7d film. A flux concentrating pick-up loop is directly coupled to a 10 nm nano-slit SQUID. The SQUID is defined entirely by helium ion irradiation from a gas field ion source. The irradiation converts the superconductor to an insulator, and no material is milled away or etched. In this manner, a very narrow non-superconducting nano-slit is created entirely within the plane of the film. The narrow slit dimension allows for maximization of the coupling to the field concentrator. Electrical measurements reveal a large 0.35 mV modulation with a magnetic field. We measure a white noise level of 2 microPhi0. The field noise of the magnetometer is 4 pT/Hz1=2 at 4.2 K.
more »
« less
Interference, diffraction, and diode effects in superconducting array based on bismuth antimony telluride topological insulator
Abstract It is well-known in optics that the spectroscopic resolution of a diffraction grating is much better compared to an interference device having just two slits, as in Young’s famous double-slit experiment. On the other hand, it is well known that a classical superconducting quantum interference device (SQUID) is analogous to the optical double-slit experiment. Here we report experiments and present a model describing a superconducting analogue to the diffraction grating, namely an array of superconducting islands positioned on a topological insulator film Bi0.8Sb1.2Te3. In the limit of an extremely weak field, of the order of one vortex per the entire array, such devices exhibit a critical current peak that is much sharper than the analogous peak of an ordinary SQUID. Therefore, such arrays can be used as sensitive absolute magnetic field sensors. A key finding is that the device acts as a superconducting diode, controlled by magnetic field.
more »
« less
- PAR ID:
- 10505897
- Publisher / Repository:
- Nature
- Date Published:
- Journal Name:
- Communications Physics
- Volume:
- 6
- Issue:
- 1
- ISSN:
- 2399-3650
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract An ordinary superconducting quantum interference device (SQUID) contains two weak links connected in parallel. We model a multiple-wire SQUID (MW-SQUID), generalized in two ways. First, the number of weak links, which are provided by parallel superconducting nanowires, is larger than two. Second, the current-phase relationship of each nanowire is assumed linear, which is typical for homogeneous superconducting thin wires. For such MW-SQUIDs, our model predicts that the critical current (Ic) is a multi-valued function of the magnetic field. We calculate vorticity stability regions (VSR), i.e., regions in the current-magnetic field plane in which, for a given distribution of vortices, the currents in all wires are below their critical values, so the vortices do not move between the cells. The VSRs have rhombic shapes in the case of two-wire SQUIDS and have more complicated shapes in the case of many nanowires. We present a classification of such VSRs and determine conditions under which VSR is disjoint, leading to 100% supercurrent modulation and quantum phase transitions. According to the model, the maximum critical current curves obey a simultaneous bias current (I) and magnetic field (B) inversion symmetry, calledIBsymmetry. Each VSR obeys a simultaneousI,Band the vorticity state inversion (V) symmetry (calledIBVsymmetry). The model predicts conditions at which MW-SQUID exhibits a perfect diode effect in which the critical current of one polarity is zero while it is not zero for the opposite polarity of the bias current. We also provide a classification of the stability regions produced by (1) completely symmetric, (2) phase disordered, (3) position disordered, (4) critical current disordered, and (5) completely disordered multi-wire SQUIDs.more » « less
-
Scanning superconducting quantum interference device (SQUID) microscopy is a powerful tool to study a wide variety of magnetic phenomena including weak magnetism originating from interfaces or antiferromagnets. Many SQUID microscopies utilize piezoelectric “s-bender” designs which offer large scan areas but can be sensitive to vibrations. Here, we design a new cryogenic scanner based off modular sets of double piezoelectric bimorphs which have higher resonant frequencies than “s-bender” designs while maintaining a 160 × 160 μm2 scan area. We demonstrate scanning capabilities by imaging local magnetic flux and susceptibility of an antiferromagnetic EuTiO3 thin film. This design provides extremely sensitive magnetic measurements and is readily adaptable for applications in other scanning probe techniques.more » « less
-
Previous work has highlighted the difficulties students have when explaining wave behavior. We present an investigation of chemistry students’ understanding of the double-slit experiment, where students were asked to explain a series of PhET simulations illustrating a single continuous light source, single-slit diffraction, and double-slit interference. We observed a variation in student reasoning and students were categorized into groups based on their ability to explain and generate a mechanism for the double-slit experiment. Some students struggled to explain the features of waves which impacted their reasoning about interference and caused them to rely on intuition to generate explanations. Other students were able to productively incorporate their previous knowledge about wave behavior, with their observations from the simulations, to build a robust mechanism for wave interference. However, students generally exhibited a limited understanding of interference, and specifically attending to the key features of waves during instruction can promote more sophisticated reasoning about this phenomenon.more » « less
-
In easy-plane magnets, the spin superfluid phase was predicted to facilitate coherent spin transport. So far, experimental evidence remains elusive. In this Letter, we propose an indirect way to sense this effect via the spin superfluid quantum interference device (spin SQUID), inspired by its superconducting counterpart (rf SQUID). The spin SQUID is constructed as a quasi-one-dimensional (1D) magnetic ring with a single Josephson weak link, functioning as an isolated device with a microwave response. The spin current is controlled by an in-plane electric field through Dzyaloshinskii-Moriya interaction. This interaction can be interpreted as a gauge field that couples to the spin supercurrent through the Aharonov-Casher effect. By investigating the static and dynamic properties of the device, we show that the spin current and the harmonic frequencies of the spin superfluid are periodic with respect to the accumulated Aharonov-Casher phase and are, therefore, sensitive to the radial electric flux through the ring in units of an electric flux quantum, suggesting a potential electric-field sensing functionality. For readout, we propose to apply spectroscopic analysis to detect the frequency shift of the harmonic modes induced by this magnonic Stark effect.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1038/s42005-023-01288-9
