An official website of the United States government
Abstract Radiation as a heat transfer mode inside a bulk material is usually negligible in comparison to conduction. Here, the contribution of radiation to energy transport inside a hyperbolic material, hexagonal boron nitride (hBN), is investigated. With hyperbolic dispersion, i.e., opposite signs of dielectric components along principal directions, phonon polaritons contribute significantly to energy transport due to a much greater number of propagating modes compared to that in a normal material. A many‐body model is developed to account for radiative heat transfer in a material with a nonuniform temperature distribution. The total radiative heat transfer through hBN is found to be largely contributed by the high‐κ modes within the Reststrahlen bands, and is comparable to phonon conduction. Experimental measurements of temperature‐dependent thermal transport also show that radiative contribution to thermal transport is of the same order as that from phonons. Therefore, this work shows, for the first time, radiative heat transfer inside a material can be comparable to phonon conductive heat transfer.
more »
« less
Greatly Enhanced Radiative Transfer Enabled by Hyperbolic Phonon Polaritons in α ‐MoO 3
Abstract Orthorhombic molybdenum trioxide (α‐MoO3) is a highly anisotropic hyperbolic material in nature. Within its wide Reststrahlen bands, α‐MoO3has hyperboloidal dispersion that supports bulk propagation of high‐k phonon polariton modes. These modes can serve as energy transport channels to greatly enhance radiative heat transfer inside the material. In this work, large radiative transfer enabled by phonon polaritons in α‐MoO3is demonstrated. The study first determines the temperature‐dependent permittivity of α‐MoO3from polarized Fourier‐Transform Infrared (FTIR) spectroscopy measurements and then uses a many‐body radiative heat transfer model to predict the equivalent radiative thermal conductivity of hyperbolic phonon polariton. Contribution of radiative transfer to the total thermal transport is experimentally determined from the Time‐Domain Thermoreflectance (TDTR) measurements in a temperature range from −100 to 300 °C. It is found that radiative transfer can account for ≈60% of the total thermal transport at a temperature of 300 °C. That is, conductive thermal transport is enhanced by >100% by radiative transfer, or radiation inside α‐MoO3is greater than that of conduction. These additional energy pathways will have important implications in thermal management in new materials and devices.
more »
« less
- Award ID(s):
- 2234399
- PAR ID:
- 10506417
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Functional Materials
- Volume:
- 34
- Issue:
- 40
- ISSN:
- 1616-301X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Sample suspension is a valuable method to improve the mechanical, thermal, electronic, and optical properties of low-dimensional materials. In terms of confined light-matter waves—the polaritons, sample suspension can elongate the wavelength of polaritons with a positive phase velocity. Previous work demonstrates a wavelength elongation of ∼10% for hyperbolic phonon polaritons (HPPs) in uniaxial crystals of hexagonal boron nitride (hBN). In this work, we report the alteration of HPPs in biaxial α-phase molybdenum trioxide (α-MoO3) by sample suspension. Our combined infrared nano-imaging experiments and electromagnetic theory reveal a wavelength elongation > 60% and a propagation length increase > 140%, due to the simultaneous wavelength elongation and dissipation elimination in the suspended specimen. We have also examined HPPs in α-MoO3with a negative phase velocity. The sample suspension shortens the HPP wavelength and simultaneously reduces the dissipation due to the unique permittivity tensor. The HPPs with improved figures of merits in the suspended specimen may be developed for nano-polaritonic circuits, biochemical sensing, emission engineering, and energy transfer.more » « less
-
Abstract One of the main bottlenecks in the development of terahertz (THz) and long-wave infrared (LWIR) technologies is the limited intrinsic response of traditional materials. Hyperbolic phonon polaritons (HPhPs) of van der Waals semiconductors couple strongly with THz and LWIR radiation. However, the mismatch of photon − polariton momentum makes far-field excitation of HPhPs challenging. Here, we propose an In-Plane Hyperbolic Polariton Tuner that is based on patterning van der Waals semiconductors, here α-MoO3, into ribbon arrays. We demonstrate that such tuners respond directly to far-field excitation and give rise to LWIR and THz resonances with high quality factors up to 300, which are strongly dependent on in-plane hyperbolic polariton of the patterned α-MoO3. We further show that with this tuner, intensity regulation of reflected and transmitted electromagnetic waves, as well as their wavelength and polarization selection can be achieved. Our results can help the development of THz and LWIR miniaturized devices.more » « less
-
Abstract Exploiting polaritons in natural vdW materials has been successful in achieving extreme light confinement and low-loss optical devices and enabling simplified device integration. Recently, α-MoO3has been reported as a semiconducting biaxial vdW material capable of sustaining naturally orthogonal in-plane phonon polariton modes in IR. In this study, we investigate the polarization-dependent optical characteristics of cavities formed using α-MoO3to extend the degrees of freedom in the design of IR photonic components exploiting the in-plane anisotropy of this material. Polarization-dependent absorption over 80% in a multilayer Fabry-Perot structure with α-MoO3is reported without the need for nanoscale fabrication on the α-MoO3. We observe coupling between the α-MoO3optical phonons and the Fabry-Perot cavity resonances. Using cross-polarized reflectance spectroscopy we show that the strong birefringence results in 15% of the total power converted into the orthogonal polarization with respect to incident wave. These findings can open new avenues in the quest for polarization filters and low-loss, integrated planar IR photonics and in dictating polarization control.more » « less
-
Abstract The biaxial van der Waals semiconductor α‐phase molybdenum trioxide (α‐MoO3) has recently received significant attention due to its ability to support highly anisotropic phonon polaritons (PhPs)—infrared (IR) light coupled to lattice vibrations—offering an unprecedented platform for controlling the flow of energy at the nanoscale. However, to fully exploit the extraordinary IR response of this material, an accurate dielectric function is required. Here, the accurate IR dielectric function of α‐MoO3is reported by modeling far‐field polarized IR reflectance spectra acquired on a single thick flake of this material. Unique to this work, the far‐field model is refined by contrasting the experimental dispersion and damping of PhPs, revealed by polariton interferometry using scattering‐type scanning near‐field optical microscopy (s‐SNOM) on thin flakes of α‐MoO3, with analytical and transfer‐matrix calculations, as well as full‐wave simulations. Through these correlative efforts, exceptional quantitative agreement is attained to both far‐ and near‐field properties for multiple flakes, thus providing strong verification of the accuracy of this model, while offering a novel approach to extracting dielectric functions of nanomaterials. In addition, by employing density functional theory (DFT), insights into the various vibrational states dictating the dielectric function model and the intriguing optical properties of α‐MoO3are provided.more » « less
