skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Partition, Reaction, and Diffusion Coefficients of Bromine in Elastomeric Polydimethylsiloxane
Experiments and models were used to determine the extent to which aqueous bromine permeated into, and reacted with, the elastomer polydimethylsiloxane (PDMS). Thin films of PDMS were immersed in bromine water, and the absorbance of bromine in the aqueous phase was measured as a function of time. Kinetics were studied as a function of mass and thickness of the immersed PDMS films. We attribute the decrease of bromine in solution to permeation into PDMS, followed by a combination of diffusion, reversible binding, and an irreversible reaction with PDMS. In order to decouple the irreversible reaction from the reversible processes, kinetics were also studied for bromine-passivated PDMS films. Fits of the models to a variety of experiments yielded the partition coefficient of bromine between the water and PDMS phases, the diffusion constant of bromine in PDMS, the irreversible reaction constant between bromine and PDMS, the molar concentration of the reactive sites within PDMS, and the on and off rates of reversible binding of bromine to PDMS. Developing a quantitative reaction-diffusion model accounting for the transport of bromine through PDMS is necessary for the design of microfluidic devices fabricated using PDMS, which are used in experimental studies of the nonlinear dynamics of reaction-diffusion networks containing Belousov-Zhabotinsky chemical oscillators.  more » « less
Award ID(s):
2011846
PAR ID:
10506777
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
American Chemical Society
Date Published:
Journal Name:
The Journal of Physical Chemistry B
Volume:
125
Issue:
22
ISSN:
1520-6106
Page Range / eLocation ID:
5937 to 5951
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, The Journal of Physical Chemistry B)
    Sub-nanoliter volumes of the Belousov-Zhabotinsky (BZ) reaction are sealed in microfluidic devices made from polydimethylsiloxane (PDMS). Bromine, which is a BZ reaction intermediate that participates in the inhibitory pathway of the reaction, is known to permeate into PDMS, and it has been suggested that PDMS and bromine can react ( J. Phys. Chem. A. 108, 2004, 1325-1332). We characterize the extent to which PDMS affects BZ oscillations by varying the volume of the PDMS surrounding the BZ reactors. We measure how the oscillation period varies with PDMS volume and compare with a theoretical reaction-diffusion model, concluding that bromine reacts with PDMS. We demonstrate that minimizing the amount of PDMS by making the samples as thin as possible maximizes the number of oscillations before the BZ reaction reaches equilibrium and ceases to oscillate. We also demonstrate that the deleterious effects of the PDMS-BZ interactions are somewhat mitigated by imposing constant chemical boundary conditions through using a light-sensitive catalyst, ruthenium, in combination with patterned illumination. Furthermore, we show that light can modulate the frequency and phase of the BZ oscillators contained in a PDMS matrix by 20-30%. 
    more » « less
  2. ; ; ; (, Polymer Chemistry)
    Water is an environmentally friendly medium for conducting reversible deactivation radical polymerizations. In this paper, we report the investigation of iodine-mediated photocontrolled atom transfer radical polymerization (photoATRP) in aqueous media. The iodine-based initiator was generated by an in situ halogen exchange from a commercially available bromine-based initiator, ethyl α-bromophenylacetate, using different iodide salts. Fast and well-controlled polymerization of a water-soluble methacrylate monomer was achieved in water under visible light irradiation, including blue, green and yellow lights. The nature of the reaction medium greatly affected the kinetics and control over the growth of polymers. Polymerizations in water resulted in a well-controlled reaction that provided high monomer conversion and polymers with low dispersities, whereas control over the polymerization was poor in bulk or in an organic solvent, N , N -dimethylformamide. Polymerizations were performed over a wide range of visible light in the absence of any photocatalyst. The selection of water as a reaction medium enabled use of iodide salts without the need for solubilizing agents. Moreover, iodine-mediated photoATRP was successfully performed in the presence of residual oxygen, signifying the potential of this polymerization system to tolerate oxygen without performing deoxygenation processes. 
    more » « less
  3. ; ; ; ; (, Soft Matter)
    A facile way to generate compatibilized blends of immiscible polymers is through reactive blending of end-functionalized homopolymers. The reaction may be reversible or irreversible depending on the end-groups and is affected by the immiscibility and transport of the reactant homopolymers and the compatibilizing copolymer product. Here we describe a phase-field framework to model the combined dynamics of reaction kinetics, diffusion, and multi-component thermodynamics on the evolution of the microstructure and reaction rate in reactive blending. A density functional with no fitting parameters, which is obtained by adapting a framework of Uneyama and Doi and qualitatively agrees with self-consistent field theory, is used in a diffusive dynamics model. For a symmetric mixture of equal-length reactive polymers mixed in equal proportions, we find that depending on the Flory χ parameter, the microstructure of an irreversibly reacting blend progresses through a rich evolution of morphologies, including from two-phase coexistence to a homogeneous mixture, or a two-phase to three-phase coexistence transitioning to a homogeneous blend or a lamellar copolymer. The emergence of a three-phase region at high χ leads to a previously unreported reaction rate scaling. For a reversible reaction, we find that the equilibrium composition is a function of both the equilibrium constant for the reaction and the χ parameter. We demonstrate that phase-field models are an effective way to understand the complex interplay of thermodynamic and kinetic effects in a reacting polymer blend. 
    more » « less
  4. ; ; ; ; ; ; ; (, Environmental Science: Water Research & Technology)
    Sodium sulfite, sodium thiosulfate, and ascorbic acid are commonly used to quench free chlorine and free bromine in studies of disinfection byproducts (DBPs) in drinking water, wastewater, and recreational water. The reducing capabilities of these quenchers, however, can lead to the degradation of some redox-labile analytes. Ammonium chloride, another common quencher, converts free chlorine into monochloramine and is therefore inappropriate for analytes susceptible to chloramination. Herein, we demonstrate the utility of 1,3,5-trimethoxybenzene (TMB) as a quencher of free chlorine and free bromine. The reactivity of TMB toward free chlorine was characterized previously. The reactivity of TMB toward free bromine was quantified herein ( k HOBr,TMB = 3.35 × 10 6 M −1 s −1 ) using competition kinetics. To explore the feasibility of TMB serving as a free halogen quencher for kinetic experiments, chlorination of 2,4-dichlorophenol, bromination of anisole, and chlorination and bromination of dimethenamid-P were examined. Although TMB does not react with free chlorine or free bromine as quickly as do some (but not all) traditional quenchers, there was generally no significant difference in the experimental rate constants with TMB (relative to thiosulfate) as the quencher. By monitoring the chlorination and bromination products of TMB, free halogen residuals in quenched samples were quantified. Furthermore, TMB did not affect the stabilities of DBPs ( e.g. , chloropicrin and bromoacetonitriles) that otherwise degraded in the presence of traditional quenchers. TMB could, therefore, be an appropriate quencher of free chlorine and free bromine in aqueous halogenation experiments involving redox-labile analytes and/or when selective quantification of residual free halogens is desired. 
    more » « less
  5. ; ; ; ; (, Accounts of Materials Research)
    Polypeptides, as the synthetic analogues of natural proteins, are an important class of biopolymers that are widely studied and used in various biomedical applications. However, the preparation of polypeptide materials from the polymerization of N-carboxyanhydride (NCA) is limited by various side reactions and stringent polymerization conditions. Recently, we report the cooperative covalent polymerization (CCP) of NCA in solvents with low polarity and weak hydrogen-bonding ability (e.g., dichloromethane or chloroform). The polymerization exhibits characteristic two-stage kinetics, which is significantly accelerated compared with conventional polymerization under identical conditions. In this Account, we review our recent studies on the CCP, with the focus on the acceleration mechanism, the kinetic modeling, and the use of fast kinetics for the efficient preparation of polypeptide materials. By studying CCP with several initiating systems, we found that the polymerization rate was dependent on the secondary structure as well as the macromolecular architecture of the propagating polypeptides. The molecular interactions between the α-helical, propagating polypeptide and the monomer played an important role in the acceleration, which catalyzed the ring-opening reaction of NCA in an enzyme-mimetic, Michaelis–Menten manner. Additionally, the proximity between initiating sites further accelerated the polymerization, presumably due to the cooperative interactions of macrodipoles between neighboring helices and/or enhanced binding of monomers. A two-stage kinetic model with a reversible monomer adsorption process in the second stage was developed to describe the CCP kinetics, which highlighted the importance of cooperativity, critical chain length, binding constant, [M]0, and [M]0/[I]0. The kinetic model successfully predicted the polymerization behavior of the CCP and the molecular-weight distribution of resulting polypeptides. The remarkable rate acceleration of the CCP offers a promising strategy for the efficient synthesis of polypeptide materials, since the fast kinetics outpaces various side reactions during the polymerization process. Chain termination and chain transfer were thus minimized, which facilitated the synthesis of high-molecular-weight polypeptide materials and multiblock copolypeptides. In addition, the accelerated polymerization enabled the synthesis of polypeptides in the presence of an aqueous phase, which was otherwise challenging due to the water-induced degradation of monomers. Taking advantage of the incorporation of the aqueous phase, we reported the preparation of well-defined polypeptides from nonpurified NCAs. We believe the studies of CCP not only improve our understanding of biological catalysis, but also benefit the downstream studies in the polypeptide field by providing versatile polypeptide materials. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email