skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Efficient Metal‐Halide Perovskite Photovoltaic Cells Deposited via Vapor Transport Deposition
Photovoltaic cells based on metal‐halide perovskites have exceeded the performance of other thin film technologies and rival the performance of devices based on archetypical silicon. Attractively, the perovskite active layer can be processed via a variety of solution‐ and vapor‐based methods. Herein, emphasis is on the use of vapor transport codeposition (VTD) to process efficient n–i–p photovoltaic cells based on methylammonium lead iodide (MAPbI3). VTD utilizes a hot‐walled reactor operated under moderate vacuum in the range of 0.5–10 Torr. The organic and metal‐halide precursors are heated with the resulting vapor transported by a N2carrier gas to a cooled substrate where they condense and react to form a perovskite film. The efficiency of photovoltaic devices based on VTD‐processed MAPbI3is found to be highest in films with excess lead iodide content, with champion devices realizing exceeding 12%.  more » « less
Award ID(s):
2011401
PAR ID:
10506824
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Publisher / Repository:
Solar RRL
Date Published:
Journal Name:
Solar RRL
Volume:
8
Issue:
1
ISSN:
2367-198X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Angewandte Chemie International Edition)
    Abstract Surface passivation of perovskite solar cells (PSCs) using a low‐cost industrial organic pigment quinacridone (QA) is presented. The procedure involves solution processing a soluble derivative of QA,N,N‐bis(tert‐butyloxycarbonyl)‐quinacridone (TBOC‐QA), followed by thermal annealing to convert TBOC‐QA into insoluble QA. With halide perovskite thin films coated by QA, PSCs based on methylammonium lead iodide (MAPbI3) showed significantly improved performance with remarkable stability. A PCE of 21.1 % was achieved, which is much higher than 18.9 % recorded for the unmodified devices. The QA coating with exceptional insolubility and hydrophobicity also led to greatly enhanced contact angle from 35.6° for the pristine MAPbI3thin films to 77.2° for QA coated MAPbI3thin films. The stability of QA passivated MAPbI3perovskite thin films and PSCs were significantly enhanced, retaining about 90 % of the initial efficiencies after more than 1000 hours storage under ambient conditions. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; (, MRS Advances)
    ABSTRACT Methods of obtaining large grain size and high crystallinity in absorber materials play an important role in fabrication of high-performance methylammonium lead iodide (MAPbI 3 ) perovskite solar cells. Here we study the effect of adding small concentrations of Cd 2+ , Zn 2+ , and Fe 2+ salts to the perovskite precursor solution used in the single-step solution fabrication process. Enhanced grain size and crystallinity in MAPbI 3 films were obtained by using 0.1% of Cd 2+ or Zn 2+ in the precursor solution. Consequently, solar cells constructed with Cd- and Zn-doped perovskite films show a significant improvement in device performance. These results suggest that the process may be an effective and facile method to fabricate high-efficiency perovskite photovoltaic devices. 
    more » « less
  3. ; ; ; ; ; (, Small)
    Abstract Halide perovskites are hailed as semiconductors of the 21stcentury. Chemical vapor deposition (CVD), a solvent‐free method, allows versatility in the growth of thin films of 3‐ and 2D organic–inorganic halide perovskites. Using CVD grown methylammonium lead iodide (MAPbI3) films as a prototype, the impact of electron beam dosage under cryogenic conditions is evaluated. With 5 kV accelerating voltage, the dosage is varied between 50 and 50000 µC cm−2. An optimum dosage of 35 000 µC cm−2results in a significant blue shift and enhancement of the photoluminescence peak. Concomitantly, a strong increase in the photocurrent is observed. A similar electron beam treatment on chlorine incorporated MAPbI3, where chlorine is known to passivate defects, shows a blue shift in the photoluminescence without improving the photocurrent properties. Low electron beam dosage under cryogenic conditions is found to damage CVD grown 2D phenylethlyammoinum lead iodide films. Monte Carlo simulations reveal differences in electron beam interaction with 3‐ and 2D halide perovskite films. 
    more » « less
  4. ; ; ; ; (, Journal of Materials Chemistry A)
    The organic metal halide perovskite material is capable of high throughput manufacturing via traditional deposition processes used in roll-to-roll, yet thermal annealing post deposition may require long ovens. We report rapid annealed perovskite thin films using intense pulsed light (IPL) to initiate a radiative thermal response that is enabled by an alkyl halide additive that collectively improves the performance of a device processed in an ambient environment from a baseline of 10 to 16.5% efficiency. Previous reports on CH 3 NH 3 PbI 3 perovskite films using IPL processing achieved functional devices in milli-second time scales and are promising for high throughput manufacturing processes under ambient conditions. In this study, we found that the addition of diiodomethane (CH 2 I 2 ) as an additive to the methylammonium iodide (MAI)/lead iodide (PbI 2 ) precursor ink chemistry and subsequent IPL thermal annealing are inter-dependent. The concentration of CH 2 I 2 and IPL processing parameters have a direct effect on the surface morphology of the films and performance within a perovskite solar cell (PSC). The CH 2 I 2 dissociates under exposure to ultraviolet (UV) radiation from the IPL source liberating iodine ions in the film, influencing the perovskite formation and reducing the defect states. We anticipate that these results can be utilized to further develop different ink formulations using alkyl halides for the IPL technique to improve the performance of perovskite solar cells processed in ambient conditions. 
    more » « less
  5. ; ; ; ; ; ; ; ; (, Advanced Energy Materials)
    Abstract Perovskite optoelectronics are regarded as a disruptive technology, but their susceptibility to environmental degradation and reliance on toxic solvents in traditional processing methods pose significant challenges to their practical implementation. Herein, methylammonium lead iodide (MAPbI3) perovskite films processed via a solvent‐free laser printing technique, that exhibit exceptional stability, are reported. These films withstand extreme conditions, including high doses of X‐ray radiation exceeding 200 Gy, blue laser illumination, 90% relative humidity, and thermal stress up to 80 °C for over 300 min in air. We demonstrate that laser‐printed films maintain their structural integrity and optoelectronic properties even after prolonged exposure to these stressors, significantly surpassing the stability of conventionally processed films. The enhanced stability is attributed to the unique film formation mechanism and resulting defect‐tolerant microstructure. These results underscore the potential of laser printing as a scalable, safe, and sustainable manufacturing route for producing stable perovskite‐based devices with potential applications in diverse fields, ranging from renewable energy to large‐area electronics and space exploration. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email