Amphiboles are hydrous minerals that are formed in the oceanic crust via hydrothermal alteration. The partial substitution of halogens for OH−makes amphibole one of the principal hosts of Cl and F in the subducting slab. In this study, we investigated the electrical conductivity of a suite of halogen bearing amphibole minerals at 1.5 GPa up to 1,400 K. The discontinuous electrical behavior indicates dehydration of amphibole at ∼915 K. This is followed by dehydration induced hydrous melting at temperatures above 1,070 K. We find that the released aqueous fluids have an electrical conductivity of ∼0.1 S/m. This high electrical conductivity is likely to explain anomalously high electrical conductivity observed in certain subduction zone settings. This high electrical conductivity of an order of magnitude greater than the electrical conductivity of pure aqueous fluids at similar conditions is likely due to the partitioning of the F and Cl into the aqueous fluids. We also noted that subsequent to the dehydration, secondary phases form due to the breakdown of the primary halogen bearing amphibole. Chemical analyses of these secondary phases indicate that they are repositories of F and Cl. Hence, we infer that upon dehydration of the primary halogen bearing amphibole, first the F and Cl are partitioned into the aqueous fluids and then the halogens are partitioned back to the secondary mineral phases. These secondary minerals are likely to transport the halogen to the deep Earth and may in part explain the halogen concentration observed in ocean island basalt.
- Award ID(s):
- 2042421
- PAR ID:
- 10507425
- Publisher / Repository:
- AGU
- Date Published:
- Journal Name:
- AGU Fall meeting
- Format(s):
- Medium: X
- Location:
- Chicago, IL
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Amphibole is a common hydrous mineral in mantle rocks. To better understand processes leading to the formation of amphibole‐bearing peridotites and pyroxenites in the lithospheric mantle, we conducted experiments by juxtaposing a lherzolite against hydrous basaltic melts in Au‐Pd capsules. Two melts were examined, a basaltic andesite and a basalt, each containing 4 wt% of water. The experiments were run at 1200°C and 1 GPa for 3 or 12 h, and then cooled to 880°C and 0.8 GPa over 49 h. The reaction at 1200°C produced a melt‐bearing orthopyroxenite‐dunite sequence. Crystallization of the partially reacted melts during cooling lead to the formation of an amphibole‐bearing gabbronorite‐orthopyroxenite‐peridotite sequence. Orthopyroxene in the peridotite and orthopyroxenite has a poikilitic texture enclosing olivines and spinels. Amphibole in the peridotite occurs interstitial to olivine, orthopyroxene, clinopyroxene, and spinel. Comparisons of texture and mineral compositions in the experimental products with those from field observations allow a better understanding of hydrous melt‐rock reaction in the lithospheric mantle. Amphibole‐bearing pyroxenite veins (or dikes) can be formed in the lithospheric mantle or at the crust‐mantle boundary by interaction between hydrous melt and peridotite and subsequent crystallization. Hornblendite or amphibole gabbronorite can be formed in the veins when the flux of hydrous melt is high. Differences in reacting melt and peridotite compositions are responsible for the variation in amphibole composition in mantle xenoliths from different tectonic settings. The extent of melt‐rock reaction is a factor that control amphibole composition across the amphibole‐bearing vein and the host peridotite.
-
Abstract We report the occurrence of a previously unidentified mineral in lunar samples: a Cl-,F-,REE-rich silico-phosphate identified as Cl-bearing fluorcalciobritholite. This mineral is found in late-stage crystallization assemblages of slowly cooled high-Ti basalts 10044, 10047, 75035, and 75055. It occurs as rims on fluorapatite or as a solid-solution between fluorapatite and Cl-fluorcalciobritholite. The Cl-fluorcalciobritholite appears to be nominally anhydrous. The Cl and Fe2+ of the lunar Cl fluorcalciobritholite distinguishes it from its terrestrial analog. The textures and chemistry of the Clfluorcalciobritholite argue for growth during the last stages of igneous crystallization, rather than by later alteration/replacement by Cl-, REE-bearing metasomatic agents in the lunar crust. The igneous growth of this Cl- and F-bearing and OH-poor mineral after apatite in the samples we have studied suggests that the Lunar Apatite Paradox model (Boyce et al. 2014) may be inapplicable for high-Ti lunar magmas. This new volatile-bearing mineral has important potential as a geochemical tool for understanding Cl isotopes and REE chemistry of lunar samples.more » « less
-
The halogens (F, Cl, Br, I) are cycled into the crust via subduction. The presence of F and Cl in arc settings impacts melt viscosity, igneous phase relations, and thermodynamic properties of magma in the pluton-to-volcano system, whereas the systematics of Br and I in melt systems are poorly understood. Mass balance constraints show that more halogens are subducted with the slab than are released during volcanism and passive degassing, suggesting that a halogen sink may exist in the lithosphere. Despite this, the halogen content of the upper continental crust of arc systems and distribution of halogens between plutonic and volcanic arc rocks are poorly quantified. This study presents whole rock halogen (F, Cl, Br, I) concentrations for 22 unaltered, geospatially- and temporally-related Cretaceous granitoid, hypabyssal plutonic, and volcanic rocks from the Sierra Nevada, California. This sampling approach allows direct comparison of plutonic and volcanic counterparts to make inferences about the pluton-volcano relationship. Because F behaves more incompatibly than Cl, Br, and I, late-stage fluid exsolution from melts may concentrate F in plutonic rocks and Cl, Br, and I in volcanic rocks. These whole rock halogen data provide a first-order approximation of the proportion of subducted halogens that are stored in the upper continental crust, and where along the magmatic plumbing path they are stored with important implications for their role in primary igneous processes such as pluton crystallization and volcanism. Ultimately, the results from this work will serve as the preliminary data for a larger study, provide insight into the magnitude of the roles the halogens play during primary igneous processes, and add to the limited halogen data on arc rocks.more » « less
-
more » « less
Abstract The conditions under which halogens partition in favor of an exsolved fluid relative to the coexisting melt are key for understanding many magmatic processes, including volcanic degassing, evolution of crustal melt bodies, and ore formation. We report new F, Cl, and Br fluid/melt partition coefficients for intermediate to silicic melts, for which F and Br data are particularly lacking; and for varying CO2-H2O contents to assess the effects of changing fluid composition (XH2O) on Br fluid/melt partitioning for the first time. The experiments were conducted at pressures 50–120 MPa, temperatures 800–1100 °C, and volatile compositions [molar XH2O = H2O/(H2O +CO2)] of 0.55 to 1, with redox conditions around the Nickel-Nickel Oxygen buffer (fO2 ≈ NNO). Experiments were not doped with Cl, Br, or F and were conducted on natural crystal-bearing volcanic products at conditions close to their respective pre-eruptive state. The experiments therefore provide realistic constraints on halogen partitioning at naturally occurring, brine-undersaturated conditions. Measurements of Br, Cl, and F were made by Secondary Ion Mass Spectrometry (SIMS) on 13 experimental glass products spanning andesite to rhyolitic compositions, together with their natural starting materials from Kelud volcano, Indonesia, and Quizapu volcano, Chile. Fluid compositions were constrained by mass balance. Average bulk halogen fluid/melt partition coefficients and standard deviations are: DClfluid/melt = 3.4 (±3.7 1 s.d.), DFfluid/melt = 1.7 (±1.7), and DBrfluid/melt = 7.1 (±6.4) for the Kelud starting material (bulk basaltic andesite), and DClfluid/melt = 11.1 (±3.5), DFfluid/melt = 0.8 (±0.8), and DBrfluid/melt = 31.3 (±20.9) for Quizapu starting material (bulk dacite). The large range in average partition coefficients is a product of changing XH2O, pressure and temperature. In agreement with studies on synthetic melts, our data show an exponential increase of halogen Dfluid/melt with increasing ionic radius, with partitioning behavior controlled by melt composition according to the nature of the complexes forming in the melt (e.g., SiF4, NaCl, KBr). The fundamental chemistry of the different halogens (differing ionic size and electronegativities) controls the way in which partitioning responds to changes in melt composition and other variables. Experimental results confirm that more Cl partitions into the fluid at higher bulk Cl contents, higher melt Na, higher fluid XH2O ratios, and lower temperatures. Bromine shows similar behavior, though it seems to be more sensitive to temperature and less sensitive to Na content and XH2O. In contrast, F partitioning into the fluid increases as the melt silica content decreases (from 72 to 56 wt% SiO2), which we attribute to the lower abundance of Si available to form F complexes in the melt. These new data provide more insights into the conditions and processes that control halogen degassing from magmas and may help to inform the collection and interpretation of melt inclusions and volcano gas data.
