An official website of the United States government
Replacing fossil fuels with non-carbon fuels is an important step towards reaching the ultimate goal of carbon neutrality. Instead of moving directly from the current natural gas energy systems to pure hydrogen, an incremental blending of hydrogen with natural gas could provide a seamless transition and minimize disruptions in power and heating source distribution to the public. Academic institutions, industry, and governments globally, are supporting research, development and deployment of hydrogen blending projects such as HyDeploy, GRHYD, THyGA, HyBlend, and others which are all seeking to develop efficient pathways to meet the carbon reduction goal in coming decades. There is an understanding that successful commercialization of hydrogen blending requires both scientific advances and favorable techno-economic analysis. Ongoing studies are focused on understanding how the properties of methane-hydrogen mixtures such as density, viscosity, phase interactions, and energy densities impact large-scale transportation via pipeline networks and end-use applications such as in modified engines, oven burners, boilers, stoves, and fuel cells. The advantages of hydrogen as a non-carbon energy carrier need to be balanced with safety concerns of blended gas during transport, such as overpressure and leakage in pipelines. While studies on the short-term hydrogen embrittlement effect have shown essentially no degradation in the metal tensile strength of pipelines, the long-term hydrogen embrittlement effect on pipelines is still the focus of research in other studies. Furthermore, pressure reduction is one of the drawbacks that hydrogen blending brings to the cost dynamics of blended gas transport. Hence, techno-economic models are also being developed to understand the energy transportation efficiency and to estimate the true cost of delivery of hydrogen blended natural gas as we move to decarbonize our energy systems. This review captures key large-scale efforts around the world that are designed to increase the confidence for a global transition to methane-hydrogen gas blends as a precursor to the adoption of a hydrogen economy by 2050.
more »
« less
Purifying Hydrogen from Dilute Hydrogen–Natural Gas Mixtures Using HT-PEM Electrochemical Hydrogen Pumps
Reducing the cost of hydrogen transport is an important priority for the proliferation of clean hydrogen to decarbonize the economy. It is possible to alleviate the hydrogen transportation costs by delivering them via existing natural gas pipeline infrastructure. This strategy, however, necessitates the dilution of hydrogen by blending it with natural gas as hydrogen embrittlement pipeline materials. In this work, we deploy high-temperature polymer electrolyte membrane electrochemical hydrogen pumps (HT-PEM EHPs) to purify hydrogen from dilute hydrogen–natural gas mixtures (5 to 20 vol % hydrogen). Interestingly, we observe that activation overpotentials govern HT-PEM EHP polarization when feeding dilute hydrogen mixtures. Pressurizing the anode to 1.76 barabs enables us to ameliorate interfacial mass transfer resistance and achieve an EHP limiting current density of 1.4 A cm–2 with a 10 vol % of hydrogen in a natural gas feed. The HT-PEM EHP showed a small degradation rate, 44 μV h–1, during a 100 h durability test.
more »
« less
- Award ID(s):
- 2426358
- PAR ID:
- 10509022
- Publisher / Repository:
- American Chemical Society
- Date Published:
- Journal Name:
- ACS Energy Letters
- ISSN:
- 2380-8195
- Page Range / eLocation ID:
- 2912 to 2919
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Existing natural gas pipelines can facilitate low-cost, large-scale hydrogen transportation and storage, but hydrogen may entail safety challenges. These challenges stem from hydrogen’s different properties compared to natural gas, such as higher ignition probability, different flame behavior, and potential for hydrogen embrittlement. Although risk assessments for hydrogen pipelines are increasing, the impact of hydrogen on the risk of third-party excavation damage (TPD), the major cause of pipeline incidents in the U.S., has received little attention. This work presents the SHyTERP model for Safe Hydrogen Transportation and Excavation Risk Prevention for Pipelines. The model incorporates causal models, excavation damage and pipeline failure statistics, and validated physical models of hydrogen and natural gas release and jet flame behavior. Through four case studies, the model compares the TPD risks of hydrogen and natural gas pipelines, offering insights and recommendations for the safe implementation of hydrogen in existing pipelines.more » « less
-
Since its implementation, exhaust gas recirculation has proven to be a reliable technique to control NOx emissions by lowering combustion temperature. Dilution with exhaust gas recirculation, whether in internal combustion engines or sequential-staged gas turbine combustors, affects flame reactivity and stability, which are related to the heat release rate and engine power. Another way to control emissions is to use hydrogen as a carbon-free alternative fuel, which is considered a milestone in the energy-decarbonization journey. However, the high reactivity of hydrogen is one of its hurdles and understanding this effect on laminar burning velocity is important. Flame propagation and burning velocity control the mixture reactivity and exothermicity and are related to abnormal combustion phenomena, such as flashback and knock. Therefore, understanding the effect of exhaust gas addition on the laminar burning velocity of hydrogen/air mixtures is imperative for engine design. In this work, a constant volume combustion chamber was used to observe the laminar burning velocity of stoichiometric hydrogen/air mixtures diluted with combustion products at 1 bar and 423K. Actual combustion products (35 % H2O + 65 % N2, by mole) were used for dilution at rates of 0-50%. The burned gas Markstein length was calculated for all mixtures. Experimental results of the laminar burning velocities for all mixtures were compared with kinetic modeling results. These measurements showed the monotonic reduction of reactivity and the laminar burning velocity with dilution. The reduced burning rates at higher dilution were reflected on the pressure gradient inside the vessel. Markstein length values decreased with dilution, meaning that flame instabilities increased with dilution.more » « less
-
Renewable energy-driven hydrogen production from electrocatalytic and photocatalytic water splitting has been widely recognized as a promising approach to utilize green energy resources and hence reduces our dependence on legacy fossil fuels as well as alleviates net carbon dioxide emissions. The realization of large-scale water splitting, however, is mainly impeded by its slow kinetics, particularly because of its sluggish anodic half reaction, the oxygen evolution reaction (OER), whose product O 2 is ironically not of high value. In fact, the co-production of H 2 and O 2 in conventional water electrolysis may result in the formation of explosive H 2 /O 2 gas mixtures due to gas crossover and reactive oxygen species (ROS); both pose safety concerns and shorten the lifetimes of water splitting cells. With these considerations in mind, replacing the OER with thermodynamically more favorable organic oxidation reactions is much more preferred, which will not only substantially reduce the voltage input for H 2 evolution from water and avoid the generation of H 2 /O 2 gas mixtures and ROS, but also possibly lead to the co-production of value-added organic products on the anode. Indeed, such an innovative strategy for H 2 production integrated with valuable organic oxidation has attracted increasing attention in both electrocatalysis and photocatalysis. This feature article showcases the most recent examples along this endeavor. As exemplified in the main text, the oxidative transformation of a variety of organic substrates, including alcohols, ammonia, urea, hydrazine, and biomass-derived intermediate chemicals, can be integrated with energy-efficient H 2 evolution. We specifically highlight the importance of oxidative biomass valorization coupled with H 2 production, as biomass is the only green carbon source whose scale is comparable to fossil fuels. Finally, the remaining challenges and future opportunities are also discussed.more » « less
-
Abstract Electrochemical oxygen reduction to hydrogen peroxide (H 2 O 2 ) in acidic media, especially in proton exchange membrane (PEM) electrode assembly reactors, suffers from low selectivity and the lack of low-cost catalysts. Here we present a cation-regulated interfacial engineering approach to promote the H 2 O 2 selectivity (over 80%) under industrial-relevant generation rates (over 400 mA cm −2 ) in strong acidic media using just carbon black catalyst and a small number of alkali metal cations, representing a 25-fold improvement compared to that without cation additives. Our density functional theory simulation suggests a “shielding effect” of alkali metal cations which squeeze away the catalyst/electrolyte interfacial protons and thus prevent further reduction of generated H 2 O 2 to water. A double-PEM solid electrolyte reactor was further developed to realize a continuous, selective (∼90%) and stable (over 500 hours) generation of H 2 O 2 via implementing this cation effect for practical applications.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1021/acsenergylett.4c00746
