skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Carboxylate ester-based electrolytes for Na-ion batteries
Sodium-ion batteries (SIBs) is a promising technology for next-generation energy storage. However, their performance is limited at low temperatures due to the inferior bulk and interfacial resistance of current electrolytes. Here we present a systematic study to evaluate carboxylate ester-based electrolytes for SIB applications, due to their favorable properties (i.e., low melting point, low viscosity and high dielectric constant). The effects of salt, concentration and solvent molecular structure were systematically examined and compared with those of carbonate-based electrolytes. By combining electrochemical tests with spectroscopic characterization, the performance of selective carboxylate ester-based electrolytes in hard carbon/Na and Na3V2(PO4)3/Na half-cells was evaluated. We found carboxylates enable high electrolyte conductivities, especially at low temperatures. However, carboxylates alone are inadequate to form a stable interphase due to their high reactivity, which can be addressed by choosing a suitable anion and facilitating anion-rich Na+ solvation by increasing salt concentration. Fundamental knowledge on the chemistry–property–performance correlation of this new family of electrolytes was obtained, and their benefits and pitfalls were thoroughly discussed. These discoveries and knowledge will shed light on the potential of carboxylate ester-based electrolytes and provide the foundation for further electrolyte engineering.  more » « less
Award ID(s):
2247407
PAR ID:
10510132
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
Royal Society of Chemistry
Date Published:
Journal Name:
Chemical Science
ISSN:
2041-6520
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, Small)
    Abstract Developing low‐voltage carboxylate anode materials is critical for achieving low‐cost, high‐performance, and sustainable Na‐ion batteries (NIBs). However, the structure design rationale and structure‐performance correlation for organic carboxylates in NIBs remains elusive. Herein, the spatial effect on the performance of carboxylate anode materials is studied by introducing heteroatoms in the conjugation structure and manipulating the positions of carboxylate groups in the aromatic rings. Planar and twisted organic carboxylates are designed and synthesized to gain insight into the impact of geometric structures to the electrochemical performance of carboxylate anodes in NIBs. Among the carboxylates, disodium 2,2’‐bipyridine‐5,5’‐dicarboxylate (2255‐Na) with a planar structure outperforms the others in terms of highest specific capacity (210 mAh g−1), longest cycle life (2000 cycles), and best rate capability (up to 5 A g−1). The cyclic stability and redox mechanism of 2255‐Na in NIBs are exploited by various characterization techniques. Moreover, high‐temperature (up to 100 °C) and all‐organic batteries based on a 2255‐Na anode, a polyaniline (PANI) cathode, and an ether‐based electrolyte are achieved and exhibited exceptional electrochemical performance. Therefore, this work demonstrates that designing organic carboxylates with extended planar conjugation structures is an effective strategy to achieve high‐performance and sustainable NIBs. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Angewandte Chemie International Edition)
    Abstract The concept of employing highly concentrated electrolytes has been widely incorporated into electrolyte design, due to their enhanced Li‐metal passivation and oxidative stability compared to their diluted counterparts. However, issues such as high viscosity and sub‐optimal wettability, compromise their suitability for commercialization. In this study, we present a highly concentrated dimethyl ether‐based electrolyte that appears as a liquid phase at ambient conditions via Li+‐ solvents ion‐dipole interactions (Coulombic condensation). Unlike conventional high salt concentration ether‐based electrolytes, it demonstrates enhanced transport properties and fluidity. The anion‐rich solvation structure also contributes to the formation of a LiF‐rich salt‐derived solid electrolyte interphase, facilitating stable Li metal cycling for over 1000 cycles at 0.5 mA cm−2, 1 mAh cm−2condition. When combined with a sulfurized polyacrylonitrile (SPAN) electrode, the electrolyte effectively reduces the polysulfide shuttling effect and ensures stable performance across a range of charging currents, up to 6 mA cm−2. This research underscores a promising strategy for developing an anion‐rich, high concentration ether electrolyte with decreased viscosity, which supports a Li metal anode with exceptional temperature durability and rapid charging capabilities. 
    more » « less
  3. ; ; ; ; ; (, Journal of The Electrochemical Society)
    An investigation of alternative lithium salts, lithium tetrafluoroborate (LiBF 4 ), lithium difluoro(oxalato)borate (LiDFOB) and lithium hexafluorophosphate (LiPF 6 ), in novel ester-based (methyl acetate/fluoroethylene carbonate- MA/FEC or methyl propionate/fluoroethylene carbonate- MP/FEC) electrolyte formulations has been conducted in LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622)/graphite cells to improve low temperature cycling performance of lithium ion batteries at −20 °C. Improved low temperature performance was observed with all the lithium salts in MA/FEC electrolyte while comparable room temperature (25 °C) capacities were observed with LiPF 6 salt only. Detailed ex-situ analysis of surface films generated with LiBF 4 , LiDFOB and LiPF 6 in ester-based electrolytes reveals that the solid electrolyte interphase (SEI) is predominately composed of lithium salt decompaction products and addition of 10% FEC (by volume%) may not be sufficient at forming a protective SEI. 
    more » « less
  4. ; ; ; ; ; ; ; ; (, Energy Advances)
    Polyethylene oxide (PEO)-based solid composite electrolytes (SCEs), with inorganic fillers, are studied extensively due to their effective balance between mechanical and electrochemical properties. The correlation between the composition of SCEs and their electrochemical behavior has been studied extensively, primarily focusing on the type of polymer matrix with a bias towards high lithium (Li) salt. In this study, we examine the changes in the properties of SCEs at two low EO : Li ratios, 43:1 and 18:1, in the PEO-LiTFSI matrix (with and without 10 wt% of 5 μm LLZTO) and evaluate their impact on Li stripping and plating reactions. Although higher salt concentration (18:1) results in substantially higher ionic conductivity (by approximately an order of magnitude), interestingly we observe that lower salt concentration (43:1) exhibits up to 3 times longer Li cycling life. Notably, electrolytes with low salt concentration (43:1) are much stiffer, with compressive modulus more than twice as high as the 18:1 counterpart. Although the ionic conductivity of the electrolyte is often the most immediate concern in the electrolyte design process, these findings accentuate the equal importance of mechanical properties in order to ensure successful electrolyte performance throughout prolonged Li cycling. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; (, Nature Communications)
    Abstract Nonaqueous sodium-based batteries are ideal candidates for the next generation of electrochemical energy storage devices. However, despite the promising performance at ambient temperature, their low-temperature (e.g., < 0 °C) operation is detrimentally affected by the increase in the electrolyte resistance and solid electrolyte interphase (SEI) instability. Here, to circumvent these issues, we propose specific electrolyte formulations comprising linear and cyclic ether-based solvents and sodium trifluoromethanesulfonate salt that are thermally stable down to −150 °C and enable the formation of a stable SEI at low temperatures. When tested in the Na||Na coin cell configuration, the low-temperature electrolytes enable long-term cycling down to −80 °C. Via ex situ physicochemical (e.g., X-ray photoelectron spectroscopy, cryogenic transmission electron microscopy and atomic force microscopy) electrode measurements and density functional theory calculations, we investigate the mechanisms responsible for efficient low-temperature electrochemical performance. We also report the assembly and testing between −20 °C and −60 °C of full Na||Na 3 V 2 (PO 4 ) 3 coin cells. The cell tested at −40 °C shows an initial discharge capacity of 68 mAh g −1 with a capacity retention of approximately 94% after 100 cycles at 22 mA g −1 . 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email