An official website of the United States government
The current insufficient recycling of commodity polymer waste has resulted in pressing environmental and human health issues in our modern society. In the quest for next-generation polymer materials, chemists have recently shifted their attention to the design of chemically recyclable polymers that can undergo depolymerization to regenerate monomers under mild conditions. During the past decade, ring-closing metathesis reactions have been demonstrated to be a robust approach for the depolymerization of polyolefins, producing low-strain cyclic alkene products which can be repolymerized back to new batches of polymers. In this review, we aim to highlight the recent advances in chemical recycling of polyolefins enabled by ring-closing metathesis depolymerization (RCMD). A library of depolymerizable polyolefins will be covered based on the ring size of their monomers or depolymerization products, including five-membered, six-membered, eight-membered, and macrocyclic rings. Moreover, current limitations, potential applications, and future opportunities of the RCMD approach will be discussed. It is clear from recent research in this field that RCMD represents a powerful strategy towards closed-loop chemical recycling of novel polyolefin materials.
more »
« less
Deconstruction of Polymers through Olefin Metathesis
The consumption of synthetic polymers has ballooned; so has the amount of post-consumer waste generated. The current polymer economy, however, is largely linear with most of the post-consumer waste being either landfilled or incinerated. The lack of recycling, together with the sizable carbon footprint of the polymer industry, has led to major negative environmental impacts. Over the past few years, chemical recycling technologies have gained significant traction as a possible technological route to tackle these challenges. In this regard, olefin metathesis, with its versatility and ease of operation, has emerged as an attractive tool. Here, we discuss the developments in olefin-metathesis-based chemical recycling technologies, including the development of new materials and the application of olefin metathesis to the recycling of commercial materials. We delve into structure–reactivity relationships in the context of polymerization–depolymerization behavior, how experimental conditions influence deconstruction outcomes, and the reaction pathways underlying these approaches. We also look at the current hurdles in adopting these technologies and relevant future directions for the field.
more »
« less
- Award ID(s):
- 2042494
- PAR ID:
- 10510377
- Publisher / Repository:
- American Chemical Society
- Date Published:
- Journal Name:
- Chemical Reviews
- ISSN:
- 0009-2665
- Subject(s) / Keyword(s):
- Depolymerization Hydrocarbons Monomers Polymerization Polymers
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The ever-growing plastic production and the caused concerns of plastic waste accumulation have stimulated the need for waste plastic chemical recycling/valorization. Current methods suffer from harsh reaction conditions and long reaction time. Herein we demonstrate a non-thermal plasma-assisted method for rapid hydrogenolysis of polystyrene (PS) at ambient temperature and atmospheric pressure, generating high yield (>40 wt%) of C1–C3 hydrocarbons and ethylene being the dominant gas product (Selectivity of ethylene, SC2H4 > 70%) within ~10 min. The fast reaction kinetics is attributed to highly active hydrogen plasma, which can effectively break bonds in polymer and initiate hydrogenolysis under mild condition. Efficient hydrogenolysis of post-consumer PS materials using this method is also demonstrated, suggesting a promising approach for fast retrieval of small molecular hydrocarbon modules from plastic materials as well as a good capability to process waste plastics in complicated conditions.more » « less
-
The negative environmental impacts of the current linear system of textile and apparel production are well-documented and require urgent action. The sector lacks an effective recycling system, resulting in massive waste and environmental pollution. This paper presents the results of qualitative research involving textile and apparel industry stakeholders, including representatives from brands and retailers, waste collectors, recyclers, non-profit organizations, academic institutions, and government agencies. Our research focused on stakeholder perceptions of the significance and importance of textile circularity, the challenges that exist for transitioning the textile and apparel industry from a linear system to a circular economy (CE), and resources that exist to support this transition. The results of this study call attention to the following urgent requirements: a consistent definition of CE to promote transparency and accountability and prevent greenwashing; improved systems for materials identification, sorting, and pre-processing of post-consumer textile waste to enable recycling; innovations in mechanical recycling technologies to maintain the value of recycled materials; and new, materials-driven approaches to design and manufacturing that are responsive to feedstock variability and diverse consumer needs. The research findings also suggest the need for flexible, regional CEs that are rooted in community partnerships.more » « less
-
Low‐strain cyclic olefin monomers, including five‐membered, six‐membered, eight‐membered, and macrocyclic rings, have been recently exploited for the synthesis of depolymerizable polyolefins via ring‐opening metathesis polymerization (ROMP). Such polyolefins can undergo ring‐closing metathesis depolymerization (RCMD) to regenerate their original monomers. Nevertheless, the depolymerization behavior of polyolefins prepared by ROMP of seven‐membered cyclic olefins, an important class of low‐strain rings, still remains unexplored. In this study, we demonstrate the chemical recycling of polyheptenamers to cycloheptene under standard RCMD conditions. Highly efficient depolymerization of polyheptenamer was enabled by Grubbs' second‐generation catalyst in toluene. It was observed that the monomer yields increased when the depolymerization temperature increased and the starting polymer concentration was reduced. A near‐quantitative monomer regeneration (>96%) was achieved within 1 h under dilute conditions (20 mM of olefins) at 60°C. Moreover, polyheptenamer exhibited a decomposition temperature above 430°C, highlighting its potential as a new class of thermally stable and chemically recyclable polymer materials.more » « less
-
Fluorinated polymers are important functional materials for a broad range of applications, but the recycling of current fluorinated polymers is challenging. We present the first example of semi-fluorinated polymers that can undergo chemical recycling to form the corresponding monomers under ambient conditions. Prepared through ring-opening metathesis polymerization of functionalized trans -cyclobutane fused cyclooctene ( t CBCO) monomers, these polymers show tunable glass transition temperatures (−2 °C to 88 °C), excellent thermal stability (decomposition onset temperatures >280 °C) and hydrophobicity (water contact angles >90°). The hydrophobicity of the semi-fluorinated polymers was further utilized in an amphiphilic diblock copolymer, which forms self-assembled micelles with a size of ∼88 nm in an aqueous solution. Finally, through an efficient, regioselective para -fluoro-thiol substitution reaction, post-polymerization functionalization of a polymer with a pentafluorophenyl imide substituent was achieved. The ease of preparation, functionalization, and recycling, along with the diverse thermomechanical properties and demonstrated hydrophobicity make the t CBCO-based depolymerizable semi-fluorinated polymers promising candidates for sustainable functional materials that can offer a solution to a circular economy.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1021/acs.chemrev.3c00748
