An official website of the United States government
Triassic strata of the Yangtze Platform at Guanling contain a dolomitized interior, undolomitized margin, and partially dolomitized slope to basin margin. Dolomitized microbial laminate caps of peritidal cycles and massive dolomite with associated evaporite nodules and solution collapse breccias are consistent with penecontemporaneous tidal flat and evaporative dolomitization in the platform interior. The preferential dolomitization of the slope and basin margin (up to 7 km basinward of the margin), dolomitization along fractures, and selective dolomitization of the matrix in slope breccia that diminishes toward the margin are interpreted to have resulted from the incursion of basin-derived fluids during burial. Integrated analysis of fluid-inclusion microthermometry, oxygen, carbon, and strontium isotopes, trace element geochemistry, U-Pb age dates of carbonate phases, and burial history support the recrystallization of interior dolomite and slope to basin-margin dolomitization by brines at high temperatures during burial. The Yangtze Platform at Guanling provides an excellent example of widespread stratiform dolomitization resulting from the superposition of multiple mechanisms, including penecontemporaneous dolomitization by evaporative seawater brines, high-temperature dolomitization of the slope and basin margin by basinal brines, and high-temperature recrystallization of dolomite by brines during burial. This study provides an example that suggests that widespread stratiform dolomite may result from superposed Earth surface and high-temperature burial dolomitization processes and provides a valuable analog for other carbonate platforms in which the margin remains undolomitized while the interior and basin margin are dolomitized. Similar mechanisms likely contributed to the widespread dolomitization of platforms across the Nanpanjiang and Sichuan basins.
more »
« less
Styles of Dolomitization Observed in the Great Bank of Guizhou, Nanpanjiang Basin, South China: Evidence for Multiple Dolomitization Processes
The Great Bank of Guizhou is a 2.5 km thick isolated carbonate platform deposited during the Triassic period. The rocks preserve evidence for multiple episodes of dolomitization, spread across a range of geologic time. Different styles of dolomitization and geochemical evidence support this interpretation. Early dolomitization includes both peritidal cycle cap dolomites and large regions of massively-bedded dolomite in the platform interior, along with isolated dolomitized and partially dolomitized clasts in slope breccias derived from the platform interior. Forms of later stage dolomite include a widespread overprint and modification of massively bedded platform interior dolomites during burial; zones of pervasively dolomitized slope sediments (10s of m thick), some of which are discordant at various scales (0.1 m to 100s of m); partial dolomitization along fractures, bedding planes, and stylolites; alternating stratiform laminae of limestone and dolostone (mm to cm scale) in slope sediments; and matrix-selective dolomitization in some slope breccias. Evidence for early dolomite includes isolated clasts of dolomite in Early Triassic slope breccias surrounded by lime mudstone, pervasive dolomite in platform interior sediments, Sr-isotopes and REE signatures consistent with Early Triassic seawater, and evidence for evaporites and solution collapse breccias in the platform interior. Textures and some geochemical indicators were modified during deep burial. Evidence for later stage dolomite (Late Triassic or later) includes zones of coarse massively dolomitized slope breccias surrounded by selectively dolomitized vertical and bedding plane fractures, stylolites, and alternating stratiform laminae of limestone and dolostone; fluid-inclusions containing brine (12-16 wt. %, NaCl equivalent) with homogenization temperatures of 100°C to 180°C, and some younger (post-burial) U-Pb age dates. Early evaporative-reflux dolomitization in the platform interior likely dominated the dolomite volumetrically before it was overprinted with burial signatures. Pervasively dolomitized slope breccias surrounded by selective dolomitized areas are interpreted to be the result of intrusion of late burial dolomitizing fluids into higher permeability units.
more »
« less
- Award ID(s):
- 2041315
- PAR ID:
- 10510590
- Publisher / Repository:
- Geological Society of America
- Date Published:
- Journal Name:
- Geological Society of America Abstracts with Programs
- Volume:
- 56
- Issue:
- 3
- Subject(s) / Keyword(s):
- doi: 10.1130/abs/2024NC-398794
- Format(s):
- Medium: X
- Location:
- Springfield, MO
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The Great Bank of Guizhou (GBG) is an isolated carbonate platform in the Nanpanjiang Basin. Contacts between limestone and dolomitized material cross-cut bedding and form an irregular lobe shaped body that extends from the interior and terminates toward the basin. Precursor carbonate facies include oolite grainstone and packstone (with some containing a microbial matrix), clotted microbialite boundstone, and massively dolomitized carbonate mudstone containing stromatolitic and fenestral fabrics indicating a range of high-energy subtidal shoal to intertidal tidal flat environments. The mudstones are present lower in the outcrop, followed by grainstones and packstones moving upwards. Samples range from partially to fully dolomitized, with partially dolomitized samples occurring near the dolomitization front. In partially dolomitized oolite, the ooids are selectively replaced by dolomite. The paragenetic sequence interpreted from petrography includes early marine intergranular cement, early fracturing associated with possible tepee formation, neomorphism of aragonitic mollusk shells and cortical laminae in ooids, anhedral replacement dolomite, dissolution forming dissolved ooids and vugs, late stage coarse euhedral dolomite cement within intergranular pores, vugs, and early fractures, twinned calcite fill of early fractures and vugs, late stage fractures filled with twinned calcite, and finally stylolites. Previous data from the western GBG using fluid inclusion and clumped isotope geothermometry indicates that dolomitization occurred with high temperatures at burial, within a spatially variable range of 90°C to 185°C. 87Sr/86Sr values of 0.707677 to 0.708601 are similar to the ratios found in Triassic seawater. δ18O (VPDB) values for dolomite range from -7.68‰ to -1.53‰, consistent with evaporative enrichment of seawater and high burial temperatures. The spatial distribution of the dolomite, strontium isotopes and oxygen isotopes are consistent with reflux dolomitization. In other areas, the platform interior contains evidence for hypersaline conditions and evaporite mineral precipitation also consistent with the reflux model. The geothermometry data indicates that early reflux dolomite was replaced at high temperatures during burial.more » « less
-
The Yangtze Platform borders the Nanpanjiang Basin on its north and west. During the Early Triassic the platform evolved from low-relief ramp with oolitic margins to a steepening platform with a relatively flat-topped geometry with margin shoals and evaporitic interior facies. At the Zhenfeng margin the precursor depositional facies include: oolitic grainstone to packstone, skeletal peloidal packstone, clotted microbialites and fenestral laminites. The Anshun strata range from undolomitized to partially dolomitized oolite and microbial facies to partially and completely dolomitized facies such as fenestral laminites. Dolomitization changes upward through the section with fenestral laminate facies being more pervasively dolomitized than the oolitic and skeletal packstone facies. The diagenetic evolution (paragenetic sequence includes: neomorphic alteration of aragonite, marine cementation, replacement dolomite, euherdral dolomites, saddle dolomites, calcite veins, stylolites, and late-stage fractures with calcite and oxide fill. Previous data from the Yangtze Platform include dolomite showing δ¹⁸O values ranging from -7.7‰ to 0.75‰ (VPDB) and δ ¹³C values ranging from 0.77‰ to 4.0‰ (VPDB). Vein calcite values range from δ ¹⁸O -18.4‰ to -5.2‰ and δ ¹³C -6.1 to 3.4‰. ⁸⁷Sr/⁸⁶Sr values from dolomite ranges from 0.707677 to 0.708601 with the exception of elevated ⁸⁷Sr/⁸⁶Sr in three samples. Homogenization temperatures (Th) and freezing point depressions (Tmice) from primary fluid inclusion assemblages from dolomite crystals indicate entrapment of saline brines (9.5 to 16 wt. % NaCl) over temperatures of 80-185°C. The preferential dolomitization of mud-rich platform interior facies and preservation of oolitic limestone facies at the platform margin points to interior derived dolomitizing fluids consistent with evaporative reflux. The range in δ ¹⁸O is consistent with enrichment by evaporative concentration of seawater, but also includes negative values consistent with high temperature fluids. ⁸⁷Sr/⁸⁶Sr values in dolomite are consistent with modified seawater including a radiogenic contribution of hydrothermal fluids. The geothermometric data, oxygen isotope values and radiogenic Sr contribution indicates that early dolomites were recrystallized at high temperatures by burial fluids.more » « less
-
The Whitehorse Group and Quartermaster Formation are extensive red-bed terrestrial sequences representing the final episode of sedimentation in the Palo Duro Basin in north-central Texas, U.S.A. Regionally, these strata record the culmination of a long-term regression sequence beginning in the middle to late Permian. The Whitehorse Group includes beds of abundant laminated to massive red quartz siltstone to fine sandstone and rare dolomite, laminated to massive gypsum, and claystones, as well as diagenetic gypsum. The Quartermaster Formation exhibits a change from nearly equal amounts of thin planar and lenticular fine sandstone and laminated to massive mudstone in its lower half to overlying strata with coarser-grained, cross-bedded sandstones indicative of meandering channels up to 7 m deep and rare overbank mudstones. Paleosols are absent in the Upper Whitehorse Group and only poorly developed in the Quartermaster Formation. Volcanic ash-fall deposits (tuffs) present in uppermost Whitehorse Group and lower Quartermaster Formation strata permit correlation among five stratigraphic sections distributed over ∼150 km and provide geochronologic age information for these rocks. Both the Whitehorse Group and Quartermaster Formation have traditionally been assigned to the late Permian Ochoan (Changhsingian) stage, and workers assumed that the Permian-Triassic boundary is characterized by a regionally significant unconformity. Chemostratigraphic or biostratigraphic evidence for this age assignment, however, have been lacking to date. Single zircon U-Pb CA-TIMS analyses from at least two distinct volcanic ash fall layers in the lower Quartermaster Formation, which were identified and collected from five different localities across the Palo Duro Basin, yield interpreted depositional ages ranging from 252.19 ± 0.30 to 251.74 ± 0.28 Ma. Single zircon U-Pb CA-TIMS analyses of detrital zircons from sandstones located only a few meters beneath the top of the Quartermaster Formation yield a range of dates from Mesoproterozoic (1418 Ma) to Middle Triassic (244.5 Ma; Anisian), the latter of which is interpreted as a maximum depositional age, which is no older than Anisian, thus indicating the Permian-Triassic boundary to lie somewhere within the lower Quartermaster Formation/upper Whitehorse Group succession. Stable carbon isotope data from 180 samples of early-burial dolomicrite cements preserve a chemostratigraphic signal that is similar among sections, with a large ∼−8‰ negative isotope excursion ∼20 m beneath the Whitehorse Group-Quartermaster Formation boundary. This large negative carbon isotope excursion is interpreted to be the same excursion associated with the end-Permian extinction and this is in concert with the new high precision radioisotopic age data presented and the fact that the excursion lies within a normal polarity stratigraphic magnetozone. Dolomite cement δ 13 C values remain less negative (between about −5 and −8 permil) into the lower part of the Quartermaster Formation before becoming more positive toward the top of the section. This long interval of negative δ 13 C values in the Quartermaster Formation is interpreted to represent the earliest Triassic (Induan) inception of biotic and ecosystem “recovery.” Oxygen isotope values of dolomicrite cements show a progressive trend toward more positive values through the boundary interval, suggesting substantially warmer conditions around the end-Permian extinction event and a trend toward cooler conditions after the earliest Triassic. Our observations on these strata show that the paleoenvironment and paleoclimate across the Permian-Triassic boundary in western, sub-equatorial Pangea was characterized by depositional systems that were not conducive to plant preservation.more » « less
-
Introduction: IODP/ICDP Expedition 364 recovered core from 505.7-1334.7 m below the seafloor (mbsf) at Site M0077A (21.45° N, 89.95° W) atop the peak ring in the Chicxulub impact structure. The core penetrated Paleogene sedimentary rocks, impactrelated suevite, melt rock, and granitic basement [1]. Approximately 110 m of post-impact, hemipelagic and pelagic sedimentary rocks were recovered, ranging from middle Eocene (Ypresian) to basal Paleocene (Danian) in age [1]. The transition between suevite and basal Paleocene sedimentary rocks is a remarkable succession of fining upward gravel to sand-sized suevite (Unit 2A) overlain by laminated carbonate-rich siltstone (Unit 1G, “impact boundary cocktail” [2]) that records the settling of fine-grained material postimpact [1]. This study concentrates on the carbonaterich Paleocene sedimentary rocks of overlying Unit 1F [1]. The degree of bioturbation, or ichnofabric index (II) [3, 4], provides a semiquantitative estimate of the density of burrowing within sedminentary facies. Collection of II data within the context of facies analysis thus yields insight into the initial and then continued disturbance of sediment by burrowing organisms recording the return of life to the crater (Fig. 1). Unit 1G: The unit extends from 616.58-617.33 mbsf (Fig. 1) and consists mainly of dark brown to dark grayish brown calcareous siltstone but is complex with several different lithologies and post-depositional pyrite nodules that disrupt bedding. The base of the unit is a sharp, stylolitized contact overlain by two ~1 cm thick, normally graded beds. Overlying, up to 617.17 mbsf, the siltstone contains internally finely laminated cm-scale beds that alternate between dark brown and grayish brown. Above, up to 616.97 mbsf is a package with mm bedded couplets of dark brown and grayish brown calcareous siltstone that grade upward into similarly colored cm bedded couplets that then thin upward into mm bedded couplets again. Above this interval bedding is indistinct and appears to be obscured by soft sediment deformation from 616.66- 616.97 mbsf. The upper part of the unit is slightly deformed with greenish marlstone and interbedded lighter gray siltstone displaying a distinct downwarp from 616.58-616.66 mbsf. Rare oval structures, that are potential individual burrows, occur down to 616.65 mbsf. Unit 1F: The unit records the remainder of the Paleocene and extends from 607.27-616.58 mbsf (Fig. 1). The base of the unit is a sharp contact at the base of a greenish claystone (II 2) that overlies Unit 1G [1]. It consists dominantly of interbedded light gray to light bluish gray wackestone and packstone (II 3-5) and light to dark bluish gray marlstone (II 2) at cm-dmscale. All lithologies contain wispy stylolites. The lower portion of the unit (616.58 and 607.74) is cyclic with cm-dm-scale bedding and light greenish-blue to bluish marlstone bases (II 2-3) that grade upward into light gray or light bluish gray wackestone and packstone (II 3-5). Contacts between lithologies are usually gradational due to burrowing. The upper portion of the unit from 610.25 to 607.74 mbsf is a light yellowish brown burrowed packstone (II 4) intercalated with gray marlstone (II 2). The uppermost 7.5 cm is calcite cemented with 1 cm wide burrows (II 3-4). Clasts are fine to coarse sand size and include foraminifera. The upper surface of this unit is a hardground and minor unconformity overlain by Eocene rocks [1]. Ichnofabric Index: II data provides a window onto the return of life post-impact (Fig. 1). Rare structures in the upper most sandy suevite (Unit 2A) and in Unit 1G (Core 40R-1) resemble bioturbation structures but may also represent fluid escape [1]. The first welldefined oval structures that appear to be burrows occur in the upper part of Unit 1G (Fig. 1, 616.58-616.65 mbsf). Unequivocal burrows (II 2) that disturb sedimentary facies occur just above, at 616.56 mbsf in Unit 1F (Fig. 1). II of 3-4 are reached 5-6 cm above indicating significant disruption of original sedimentary strutures. An II of 5 is first documented at 616.16 mbsf (Fig. 1). Above this level through the Paleocene succession II largely varies between 2 and 5 with rare laminated intervals (II 1). Bioturbation intensity correlates well with facies changes and more marly facies display lower levels of bioturbation than more carbonate- rich facies. This correlation implies a depth and/or paleoredox control on the distribution of bioturbating organisms. Discussion: II and the return of life: The II data indicate that burrowing organisms were likely reestablished in the crater before the end of deposition of Unit 1G. Biostratigraphic analyses document a mix of Late Cretaceous and earliest Danian taxa within Unit Lunar and Planetary Science XLVIII (2017) 1348.pdf 1G and lowermost Danian zone Pα documented in the lowermost part of Unit 1F down to 616.58 mbsf [1]. P1a taxa occur down to 616.29 mbsf with P1b-P4 recorded upward through 607.27 m [1]. Burrowing organisims were thus active by earliest Danian indicating a rapid return of life to the crater. Hydrocode modeling implies that much of the deformation and peak ring formation was completed within minutes of the impact [5]. Deposition and reworking of impact breccia by tsunami and seiches likely extended for several days [6]. More refined estimates for the return of life to the crater may be possible with more detailed analysis of the deposition of laminae within Unit 1G that records marine settling of fine-grained material that may have taken days to months.more » « less
