An official website of the United States government
Acoustic streaming has been widely used in microfluidics to manipulate various micro−/nano-objects. In this work, acoustic streaming activated by interdigital transducers (IDT) immersed in highly viscous oil is studied numerically and experimentally. In particular, we developed a modeling strategy termed the “slip velocity method” that enables a 3D simulation of surface acoustic wave microfluidics in a large domain (4 × 4 × 2 mm 3 ) and at a high frequency (23.9 MHz). The experimental and numerical results both show that on top of the oil, all the acoustic streamlines converge at two horizontal stagnation points above the two symmetric sides of the IDT. At these two stagnation points, water droplets floating on the oil can be trapped. Based on these characteristics of the acoustic streaming field, we designed a surface acoustic wave microfluidic device with an integrated IDT array fabricated on a 128° YX LiNbO 3 substrate to perform programmable, contactless droplet manipulation. By activating IDTs accordingly, the water droplets on the oil can be moved to the corresponding traps. With its excellent capability for manipulating droplets in a highly programmable, controllable manner, our surface acoustic wave microfluidic devices are valuable for on-chip contactless sample handling and chemical reactions.
more »
« less
Experimental study on spray in the atmospheric surface layer by raindrops impacting water surface
Spray formed by a myriad of secondary droplets generated by the impact of raindrops on a deep-water pool is studied with a laboratory rain facility. Experiments are performed with two rain rates and raindrops fall on the water surface at a nearly constant velocity. The secondary droplets at various heights above the pool's water surface are recorded with a cinematic digital in-line holographic technique that consists of a high-speed camera, a pulsed Nd:YLF laser and associated optics. The experimental results show that in the heat-map scatter plots of radius versus velocity near the water surface of the pool, the droplets are distributed into three regions, corresponding to distinct physical mechanisms of droplet generation. It is found that the diameter distribution of the droplets in the rain field changes with height above the pool's water surfaces. Both numerical simulation and experimental data reveal that the liquid water content, due to the presence of secondary droplets, in the atmospheric surface layer decreases exponentially with increasing height.
more »
« less
- Award ID(s):
- 1829943
- PAR ID:
- 10511775
- Publisher / Repository:
- Cambridge University Press
- Date Published:
- Journal Name:
- Journal of Fluid Mechanics
- Volume:
- 988
- ISSN:
- 0022-1120
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Cloud condensation and hydrometeor evaporation fractionate stable isotopes of water, enriching liquid with heavy isotopes; whereupon updrafts, downdrafts, and rain vertically redistribute water and its isotopes in the lower troposphere. These vertical water fluxes through the marine boundary layer affect low cloud climate feedback and, combined with isotope fractionation, are hypothesized to explain the depletion of tropical precipitation at higher precipitation rates known as the “amount effect.” Here, an efficient and numerically stable quasi‐analytical model simulates the evaporation of raindrops and enrichment of their isotope composition. It is applied to a drop size distribution and subcloud environment representative of Atlantic trade cumulus clouds. Idealized physics experiments artificially zero out selected processes to discern the separate effects on the isotope ratio of raindrops, of exchange with the environment, evaporation, and kinetic molecular diffusion. A parameterization of size‐dependent molecular and eddy diffusion is formulated that enriches raindrops much more strongly (+5‰ for deuterated water [HDO] and +3.5‰ for O) than equilibrium evaporation as they become smaller than 1 mm. The effect on evaporated vapor is also assessed. Rain evaporation enriches subcloud vapor by +12‰ per mm rain (for HDO), explaining observations of enriched vapor in cold pools sourced by evaporatively cooled downdrafts. Drops smaller than 0.5 mm evaporate completely before falling 700 m in typical subtropical marine boundary layer conditions. The early and complete evaporation of these smaller drops in the rain size distribution enriches the vapor produced by rain evaporation.more » « less
-
Abstract Bulk microphysics schemes continue to face challenges due in part to the necessary simplification of hydrometeor properties and processes that is inherent to any parameterization. In all operational bulk schemes, one such simplification is the division of liquid water into two subcategories (cloud and rain) when predicting the evolution of warm clouds. It was previously found that biases in collisional growth in a bulk scheme with these separate liquid water categories can be mitigated with a unified liquid water category in which cloud and rain are contained within the same category. In this study, we examine the effect of artificially separating the liquid water category on other microphysical processes and in more realistic settings. Both our idealized 1D and 3D results show that a unified category bulk scheme is fundamentally better at predicting the timing and intensity of rain from warm‐phase cumulus clouds compared to a traditional (separate) category bulk scheme. This is because a unified category bulk scheme allows a bimodal distribution to exist within one traditional “rain” category, whereas separate category bulk scheme only have one mode per category. This advantage allows the unified bulk scheme to retain the information of the largest droplets even as they fall through a layer of small raindrops. A separate category bulk scheme fails to represent this bimodal feature in comparison.more » « less
-
Verberck, Bart (Ed.)The Leidenfrost effect—the levitation and hovering of liquid droplets on hot solid surfaces—generally requires a sufficiently high substrate temperature to activate liquid vaporization. Here we report the modulation of Leidenfrost-like jumping of sessile water microdroplets on micropillared surfaces at a relatively low temperature. Compared to traditional Leidenfrost effect occurring above 230 °C, the fin-array-like micropillars enable water microdroplets to levitate and jump off the surface within milliseconds at a temperature of 130 °C by triggering the inertia-controlled growth of individual vapour bubbles at the droplet base. We demonstrate that droplet jumping, resulting from momentum interactions between the expanding vapour bubble and the droplet, can be modulated by tailoring of the thermal boundary layer thickness through pillar height. This enables regulation of the bubble expansion between the inertia-controlled mode and the heat-transfer-limited mode. The two bubble-growth modes give rise to distinct droplet jumping behaviours characterized by constant velocity and constant energy regimes, respectively. This heating strategy allows the straightforward purging of wetting liquid droplets on rough or structured surfaces in a controlled manner, with potential applications including the rapid removal of fouling media, even when located in surface cavities.more » « less
-
Abstract During freezing rain, secondary ice produced by the fragmentation of freezing drops (FFD) can initiate a chain reaction, potentially transitioning freezing rain into ice pellets. Including this process in numerical weather prediction models is challenging due to the uncertainty of this mechanism. To bridge this gap, this study aims to evaluate the efficiency of the FFD process during ice pellet precipitation using measurements collected onboard the National Research Council Canada (NRC) Convair-580 research aircraft during the 2022 Winter Precipitation Type Research Multiscale Experiment (WINTRE-MIX). Below the supercooled raindrops freezing altitude, in situ probes measured a bimodal particle size distribution. Observations from imaging and optical-array probes show that most particles smaller than 500μm in diameter were nonspherical ice crystals, in the concentration of ∼500 L−1. In contrast, most particles larger than 500μm were identified as fractured ice pellets and ice pellets with bulges, which suggested the occurrence of the FFD process. A conceptual model is then developed to show that five–eight fragments of ice were produced for each freezing drop. Two existing parameterizations of the FFD process are also tested. It is shown that one parameterization would result in less ice crystals than the measured number concentration, while the second one would result in too many ice crystals. Adjustments to these parameterizations are computed based on the collected observations. This analysis will be valuable for including the FFD process into simulations of freezing rain, ice pellets, and other weather phenomena where this process plays a significant role. Significance StatementThis study presents unique measurements from a winter storm recorded by state-of-the-art instruments onboard a research aircraft at the altitude where ice pellets are formed. The collected data suggest that the freezing of a few initial raindrops at an altitude of around 250 m above the ground resulted in the production of ice crystals. These ice crystals led to the freezing of additional raindrops in a feedback loop that can be referred to as ice multiplication. This process is quantified in the current study. The results will be valuable in improving the representation of ice pellets and freezing rain in computer simulations of winter storms.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1017/jfm.2024.419
