skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Rapid Capture of Per- and Polyfluoroalkyl Substances Using a Self-Assembling Zirconium-Based Metal-Organic Cage
Legacy and emerging per- and polyfluoroalkyl substances (PFAS) are widely detected in environmental and human samples because of their widespread use and resistance to degradation. Due to the increasing concern on health impacts of PFAS resulting from exposure to contaminated water, the development of novel materials to capture and remove PFAS from the environment is needed. Here, we present a self-assembling, fluorinated, zirconium-based metal–organic cage (F-ZrMOC) capable of capturing 37 different PFAS species, at an average of 82% removal from a solution that contains 400 ng/mL of each individual PFAS. The F-ZrMOC captured different classes of PFAS within 30 s, including perfluoroalkyl carboxylates, sulfonates, sulfonamides, ethoxylates, and fluorotelomer carboxylates/sulfonates/alcohols from water during in-vial, static, and flow through exposures (in which the F-ZrMOC is used as a solid phase extraction sorbent). Removal efficiency is higher for PFAS with chain lengths of seven carbons or higher; the presence of complex matrices such as untreated wastewater and groundwater samples did not significantly reduce the removal efficiencies for PFAS. The F-ZrMOC was characterized using 1H and 19F nuclear magnetic resonance (NMR) spectroscopy, and the stoichiometry of the synthesized cage was confirmed using Fourier transform-ion cyclotron resonance mass spectrometry. The surface area and pore size of F-ZrMOC were further determined by N2 and CO2 sorption measurements. 19F-NMR spectroscopy revealed that solvent plays an important role in the capture of PFAS; once the cages are in contact with methanol solution, captured PFAS are released.  more » « less
Award ID(s):
1905274
PAR ID:
10511980
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
American Chemical Society
Date Published:
Journal Name:
ACS Applied Engineering Materials
Volume:
2
Issue:
1
ISSN:
2771-9545
Page Range / eLocation ID:
87 to 95
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Environmental Science: Advances)
    Coagulation/flocculation is a widely used water and wastewater treatment process due to its low cost, simplicity, and effectiveness. However, the process is not effective in the treatment of per- and polyfluoroalkyl substances (PFAS), the presence and treatment of which is an ongoing challenge for water providers. Here, we explore cationic surfactant-enhanced coagulation as a process modification to target the removal of PFAS in existing coagulation/flocculation systems. Batch experiments, in jar testing apparatus, were performed to assess the removal of two short-chain and two long-chain PFAS at an initial concentration of 10 µg/L with the addition of cetyltrimethylammoniumg chloride (CTAC) as the coagulant-aid. Our findings suggest that elevated coagulant dose (60 mg/L of alum or 100 mg/L of FeCl3) coupled with the addition of a cationic surfactant (1 mg/L of CTAC) significantly enhanced the removal of both short-chain (perfluorobutane sulfonate: PFBS removal to >40%) and long-chain PFAS (perfluorooctanoic acid: PFOA and perfluorooctane sulfonate: PFOS removal to >80%), with FeCl3 showing better performance than alum. Sulfonates (PFBS, PFOS) were shown to be removed more efficiently compared to carboxylates (PFBA, PFOA), presumably due to their higher hydrophobicity leading to better interactions with the flocs. Furthermore, CTAC in combination with traditionally used additives such as Powdered Activated Carbon (PAC), served as a better aid for PFAS treatment and improved the removal of PFBS, PFOA, and PFOS to >98%. This study highlights that introducing a cost-effective pre-treatment with a cationic surfactant to existing conventional treatment systems can improve the performance efficiency in treating PFAS-contaminated waters. 
    more » « less
  2. ; ; (, Journal of Computational Chemistry)
    Abstract Per‐ and polyfluoroalkyl substances (PFAS) are robust “forever” chemicals that have become global environmental contaminants due to their inability to degrade using traditional techniques. In addition to the persistent nature of PFAS, the structural and functional diversity in PFAS creates a unique challenge in identification and remediation. Their identification is further complicated by the absence of standards for many PFAS. This work is aimed at developing a protocol for computing and establishing accurate19F NMR chemical shifts for PFAS using density functional theory (DFT), which can aid in the identification of PFAS. The impact of solvation and basis sets was evaluated by comparing the computed data with the experimental measurements. Results showed the addition of dispersion corrections in the methodology improve the accuracy of calculated NMR parameters within 4 ppm of the experimental values. Adding a second diffuse function and additional polarization did not improve the accuracy, likely because of the electronegativity of fluorine which does not allow the electron density of fluorine atoms to be polarized. The inclusion of various implicit solvation (DMSO, chloroform, and water) yielded negligible differences in accuracy, and were overall less accurate than the gas phase calculations. The most accurate methodology was then applied to more environmentally relevant PFAS, and the impact of helical nature on the NMR signatures was evaluated. The implication of this work is to be able to improve the identification of structurally diverse PFAS using the19F NMR. 
    more » « less
  3. ; ; (, Inorganic Chemistry)
    The previously unexplored noncovalent binding of the highly toxic tetrafluoroberyllate anion (BeF42–) and its extraction from water into organic solvents are presented. Nanojars resemble anion-binding proteins in that they also possess an inner anion binding pocket lined by a multitude of H-bond donors (OH groups), which wrap around the incarcerated anion and completely isolate it from the surrounding medium. The BeF4-binding propensity of [BeF4⊂{CuII(OH)(pz)}n]2– (pz = pyrazolate; n = 27–32) nanojars of different sizes is investigated using an array of techniques including mass spectrometry, paramagnetic 1H, 9Be, and 19F NMR spectroscopy, and X-ray crystallography, along with thermal stability studies in solution and chemical stability studies toward acidity and Ba2+ ions. The latter is found to be unable to precipitate the insoluble BaBeF4 from nanojar solutions, indicating a very strong binding of the BeF42– anion by nanojars. 9Be and 19F NMR spectroscopy allows for the unprecedented direct probing of the incarcerated anion in a nanojar and, along with 1H NMR studies, reveals the fluxional structure of nanojars and their inner anion-binding pockets. Single-crystal X-ray diffraction provides the crystal and molecular structures of (Bu4N)2[BeF4⊂{Cu(OH)(pz)}32], which contains a novel Cux-ring combination (x = 9 + 14 + 9), (Bu4N)2[BeF4⊂{Cu(OH)(pz)}8+14+9], and (Bu4N)2[BeF4⊂{Cu(OH)(pz)}6+12+10] and offers detailed structural parameters related to the supramolecular binding of BeF42– in these nanojars. The extraction of BeF42– from water into organic solvents, including the highly hydrophobic solvent n-heptane, demonstrates that nanojars are efficient binding and extracting agents not only for oxoanions but also for fluoroanions. 
    more » « less
  4. ; ; ; ; (, Macromolecules)
    The design of safe and high-performance, nanostructured, block polymer (BP) electrolytes for lithium-ion batteries requires a thorough understanding of the key parameters that govern local structure and dynamics. Yet, the interfaces between microphase-separated domains can introduce complexities in this local behavior that can be challenging to quantify. Herein, the local polymer, cation (Li+), and anion dynamics were described in salt-doped polystyrene-block-poly(oligo-oxyethylene methyl ether methacrylate) (PS-b-POEM) through a quantitative framework that considered the effects of polymer architecture, segmental mixing, chain stretching, and confinement on polymer mobility and ion transport. This framework was validated through nuclear magnetic resonance (NMR) spectroscopy measurements on solid (dry) polymer electrolyte samples. Notably, a mobility transition temperature (Tmobility) was identified through NMR spectroscopy that captured the local dynamics more accurately than the thermal glass transition temperature. Additionally, the approach quantitatively described the mobility gradient across a domain when segmental mixing effects were combined with chain stretching and confinement information, especially at higher segregation strengths – facilitating the assessment of local ion diffusion and conductivity. Spatially averaged local ion diffusion predictions quantitatively matched NMR-measured ion diffusivities in the BP samples, while spatially summed ionic conductivity predictions across a domain qualitatively captured trends in the measured ionic conductivities. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; (, Angewandte Chemie International Edition)
    Mounting concerns regarding per‐/poly‐fluoroalkyl substances (PFAS) on human health are focusing attention on trace‐level PFAS detection in aqueous environments. Here, we report a readily prepared small molecule, 2,6‐bis(3,5‐diethyl‐1H‐pyrrol‐2‐yl)pyridine (receptor 1), that displays high binding affinities (logKa< = 4.9–6.2) and produces a strong “turn‐on” emission response when exposed to representative PFAS in hexanes. The hydrophobic nature of 1 , and its strong affinity for various PFAS, allowed hexanes solutions of 1 to be used as “turn‐on” emission sensors for dilute aqueous solutions of long‐chain (≥C8) PFAS under acidic conditions (pH 2) by liquid‐phase extraction (LPE). In the case of perfluorooctanoic acid (PFOA), the response was rapid (under 10 min) and sensitive. Limits of detection (LOD) as low as 250 ppt were readily achievable by direct naked‐eye observation. LOD as low as 40 and 100 ppt, respectively, could be reached for deionized and tap water solutions of PFOA using a smartphone color‐scanning application. Little change in the sensitivity was seen in the presence of a range of inorganic and organic species that could act as potential interferants. Support for the present findings came from UV–vis absorbance, fluorescence, 1 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email