An official website of the United States government
Efficient charge transport pathways in solutions of redox-active polymers are essential for advancing nextgeneration energy storage systems. Herein, we report the grafting of (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) and poly(2,2,6,6-tetramethyl-1-piperidinyloxy-4-yl methacrylate) (PTMA) polymer brushes onto silica particles with different molecular weights and grafting densities, and the impact of these composite particles in solutions of PTMA. The polymer-grafted particles are characterized using Fourier-transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR) spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS) techniques. The grafted polymers have molecular weights of 2.5 kDa and 5.0 kDa, with corresponding grafting densities of 0.688 and 0.378 chains nm−2 for SiO2-PTMA-2.5k and SiO2-PTMA-5k, respectively, with the grafting density decreasing with increasing graft length. To investigate the effect of these composite particles on charge transport in solutions of PTMA, different concentrations of the grafted particles were added to solutions of PTMA of different concentrations (near overlap concentration, C*) in 0.1 M LiTFSI in acetonitrile. Electrochemical analysis reveals that below C* the addition of SiO2-PTMA-5k increases the apparent diffusion coefficient (Dapp) 15.2% to 1.041 × 10−6 cm2 s−1 , the exchange rate constant (kex,app) by 9.5% to 1.546 × 1011 L mol−1 s−1, and the heterogeneous electron transfer rate constant (k0) by 24.6%, to 5.526 × 10−4 cm s−1. These results indicate that the synergistic interactions between unbound PTMA polymer chains in solution and PTMA-grafted particles facilitate interchain charge transfer kinetics. This highlights that grafted redoxactive particles can enhance charge transport without the limitations of polymer-only solutions (e.g., chain entanglement) and presents a promising design strategy for high-performance electrochemical applications, such as redox flow batteries (RFBs).
more »
« less
Recyclable Organic Radical Electrodes for Metal‐Free Batteries
Abstract Organic batteries are one of the possible routes for transitioning to sustainable energy storage solutions. However, the recycling of organic batteries, which is a key step toward circularity, is not easily achieved. This work shows the direct recycling of poly(2,2,6,6‐tetramethylpiperidinyloxy‐4‐yl) (PTMA) and poly(2,2,6,6‐tetramethylpiperidinyloxy‐4‐yl acrylamide) (PTAm) based composite electrodes. After charge‐discharge cycling, the electrodes are deconstructed using a solubilizing‐solvent and then reconstructed using a casting‐solvent. The electrochemical properties of the original and recycled electrodes are compared using cyclic voltammetry (CV) and galvanostatic charge‐discharge (GCD) cycling, from which it is discovered using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) that recycling can be challenged by the formation of a cathode electrolyte interphase (CEI). In turn, an additive is proposed to modify the CEI layer and improve the properties after recycling. Last, an anionic rocking chair battery consisting of PTAm electrodes as both positive and negative electrodes is demonstrated, in which the electrodes are recycled to form a new battery. This work demonstrates the recycling of composite electrodes for organic batteries and provides insights into the challenges and possible solutions for recycling the next‐generation electrochemical energy storage devices.
more »
« less
- Award ID(s):
- 2104179
- PAR ID:
- 10513943
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- ChemSusChem
- Volume:
- 17
- Issue:
- 20
- ISSN:
- 1864-5631
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This paper presents the development of novel rechargeable cement-based batteries with carbon fiber mesh for energy storage applications. With the increasing demand for sustainable energy storage solutions, there is a growing interest in exploring unconventional materials and technologies. The batteries featured the carbon fiber mesh, which coated with nickel oxide and iron materials as electrodes and immersed in a cement-based electrolyte, offering a unique approach to energy storage. Experimental investigations, including electrochemical impedance spectroscopy, cyclic voltammetry, charge-discharge cycling, and rate performance assessments, were conducted to evaluate the batteries' performance. Results indicated that the batteries have promising features such as high ionic conductivity of the cement-based electrolyte and stable charge-discharge behaviors over 100 cycles. Cyclic voltammetry curves demonstrated quasi-reversible redox peaks, indicative of battery-type electrochemistry. The rechargeable cement-based batteries exhibited stability in discharge capacity, efficiency, and energy density, surpassing existing literatures on cement batteries, with a maximum energy density of 7.6 Wh/ m2. Despite challenges related to efficiency and energy density, this paper envisions the practical applications for the batteries, from powering light sensors to supporting 5G base stations and meeting daily electricity needs. Integration of rechargeable cement-based batteries and clean energy sources holds significant promise for global energy storage solutions. In conclusion, this research provides valuable insights into developing rechargeable cement-based batteries, highlights their potential as sustainable energy storage solutions with opportunities for further optimization and future advancements.more » « less
-
Na-ion batteries have taken more interest in recent years as an alternative battery chemistry to Li-ion batteries because of material abundance, cost, and sufficient volumetric energy density for large-scale energy storage applications. However, Na-ion batteries suffer from rapid capacity fade associated with chemo-mechanical instabilities such as the formation of resistive solid-electrolyte / cathode-electrolyte interphase (SEI/CEI) layers, irreversible phase formations, and particle fracture. The cathode materials are fragile, especially metal oxides, therefore Na-ion cathodes are more prone to mechanical deformations upon larger volumetric expansions/reductions during Na-ion intercalation. Electrolyte additives have been utilized to improve the electrochemical performance of Li-ion and Na-ion batteries by modifying the chemistry of the SEI layers. In situ stress measurements on Si anode in Li-ion batteries demonstrated the generation of less mechanical deformations in the electrode when cycled in the presence of FEC additives.1However, there is not much known about the impact of electrolyte additives on the chemo-mechanical properties of CEI layers in Na-ion battery cathodes. Furthermore, the question still stands about how the electrolyte additives may impact the mechanical stability of the Na-ion cathodes. To address this gap, we systematically investigated the role of FEC additives on the electrochemical performance and associated chemo-mechanical instabilities in NaCrO2 cathodes. Experiments were performed in organic electrolytes with/without FEC additives. First, the talk will start with presenting the impact of FEC additives on the capacity retention and cyclic voltammeter profiles of NaCrO2 cathodes. Then, digital image correlation and multi-beam optical stress sensor techniques were employed to probe electrochemical strain and stress generation in the composite NaCrO2 cathodes during electrochemical cycling in organic electrolytes with/without FEC additives. Surface chemistry of the NaCrO2 cathodes after cycling was investigated with the FT-IR measurements. In summary, the talk will present contrast differences in the electrochemical and chemo-mechanical properties of NaCrO2 cathodes when cycled in the presence of the FEC additives. Acknowledgement: This work is supported by National Science Foundation (award number 2321405). Reference: 1) Tripathi et al 2023 J. Electrochem. Soc. 170 090544more » « less
-
Abstract Lithium‐ion battery electrodes are manufactured using a new additive manufacturing process based on dry powders. By using dry powder‐based processing, the solvent and its associated drying processes in conventional battery process can be removed, allowing for large‐scale Li‐ion battery production to be more economically viable in markets such as automotive energy storage systems. Uniform mixing distribution of the additive materials throughout the active material is the driving factor for manufacturing dry powder‐based Li‐ion batteries. Therefore, this article focuses on developing a physical model based on interfacial energies to understand the mixing characteristics of the dry mixed particulate materials. The mixing studies show that functional electrodes can be manufactured using dry processing with binder and conductive additive materials as low as 1 wt% due to the uniformly distributed particles. Electrochemical performance of the dry manufactured electrodes with reduced conductive and binder additive is promising as the cells retained 77% capacity after 100 cycles. While not representative of the best possible electrochemical performance of Li‐ion batteries, the achieved electrochemical performance of the reduced conductive and binder additive electrodes with LiCoO2as the active material confirms the well distributed nature of the additive particles throughout the electrode matrix.more » « less
-
The rapid expansion of electric vehicle (EV) fleet calls for large number of lithium-ion batteries to be recycled at their end-of-life. Various recycling methods have been developed or under development to recover the high-value materials from retired lithium-ion batteries. Amongst these methods, direct recycling techniques have been developed and reported to recycle battery materials for reuse in new battery manufacturing since the electrochemical properties of the recycled materials can be fully recovered to the same level of pristine materials. In literature, innovative sintering processes have been developed to recover the composition and crystal structure of spent cathode materials; hydrothermal regeneration processes have been reported to regenerate the spent cathode materials in the solvents at a moderate temperature, followed by the high-temperature short annealing process. The regenerated cathode materials show the same specific capacity and cycling performance as those of pristine materials. The electrochemical regeneration method is applied to fully recover the electrochemical performance of cathode material with stable crystal structure. While the direct recycling techniques are still under development, their future applications in industry are still not clear. This study aims to classify and summarize state-of-the-art of the direct recycling methods, and evaluate the regenerated cathode materials’ performance and the application potential to be used for manufacturing of new lithium-ion batteries in future. The results will help increase understanding of the direct recycling technologies and facilitate the associated R&D for future industrial scaling-up of direct recycling processes for retired lithium ion batteries from electric vehicles.more » « less
