Dielectric elastomer actuators (DEAs) are soft, electrically powered actuators that have no discrete moving parts, yet can exhibit large strains (10%–50%) and moderate stress (∼100 kPa). This Tutorial describes the physical basis underlying the operation of DEA's, starting with a simple linear analysis, followed by nonlinear Newtonian and energy approaches necessary to describe large strain characteristics of actuators. These lead to theoretical limits on actuation strains and useful non-dimensional parameters, such as the normalized electric breakdown field. The analyses guide the selection of elastomer materials and compliant electrodes for DEAs. As DEAs operate at high electric fields, this Tutorial describes some of the factors affecting the Weibull distribution of dielectric breakdown, geometrical effects, distinguishing between permanent and “soft” breakdown, as well as “self-clearing” and its relation to proof testing to increase device reliability. New evidence for molecular alignment under an electric field is also presented. In the discussion of compliant electrodes, the rationale for carbon nanotube (CNT) electrodes is presented based on their compliance and ability to maintain their percolative conductivity even when stretched. A procedure for making complaint CNT electrodes is included for those who wish to fabricate their own. Percolative electrodes inevitably give rise to only partial surface coverage and the consequences on actuator performance are introduced. Developments in actuator geometry, including recent 3D printing, are described. The physical basis of versatile and reconfigurable shape-changing actuators, together with their analysis, is presented and illustrated with examples. Finally, prospects for achieving even higher performance DEAs will be discussed.
Elastic integrated electronics based on a stretchable n-type elastomer–semiconductor–elastomer stack
- Award ID(s):
- 2227062
- NSF-PAR ID:
- 10514509
- Publisher / Repository:
- Nature Portfolio
- Date Published:
- Journal Name:
- Nature Electronics
- Volume:
- 6
- Issue:
- 5
- ISSN:
- 2520-1131
- Page Range / eLocation ID:
- 349 to 359
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
"This paper studies the lap shear, in which both the adhesive and adherends are elastic, but the adhesive is much softer than the adherends. The shear lag model identifies a length, called the shear lag length Ls. The energy release rate of a debond crack is affected by the elasticity of both the adhesive and adherends. Their relative importance is characterized by the ratio of the length of the remaining joint, L, to the shear lag length, Ls. In the short-joint limit, L/Ls→0, the adherends do not deform, and the elasticity of the adhesive gives the energy release rate. In the long-joint limit, L/Ls→∞, the interior of the adhesive does not deform, and the elasticity of the adherends gives the energy release rate. The shear lag model gives an approximate expression of the energy release rate for all values of L/Ls. This expression is in excellent agreement with the results obtained by finite element calculations, so long as the crack is long compared to the thickness of the adhesive."more » « less
-
This paper describes the 3D printing of a ternary composite of polydimethylsiloxane (PDMS) and nanoparticles of iron oxide and barium titanate. The composite was printed using a commercially available 3D printer. Thermal curing of the composite during printing allowed for overall low process times of a few minutes. Scanning electron microscopy indicated uniform composite layers. The resulting composite films showed ferromagnetic behaviour, and applicability in magnetic actuation and piezoelectric energy harvesting.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1038/s41928-023-00966-4
