skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Discrete Time Monitoring of Power Grids
With high penetration of inverter-based renewable energy sources (IBRES) power system dynamics began to occur within shorter time frames. However, existing monitoring tools that rely on phasor measurements lack sufficient resolution to monitor such fast transients in the grid. To address this issue, this paper proposes a weighted least absolute value (WLAV) estimation-based monitoring tool that uses the same discrete samples of measured voltages and currents that are used by the phasor measurement units (PMU). Such samples are in general not made available to the users by the PMUs but instead they are processed for a full or fraction of a cycle to obtain the positive sequence phasors. Given that these discrete samples are readily available, there is little reason not to use them for tracking fast voltage and current transients introduced by inverter-based renewable energy sources. Performance of the proposed estimator is illustrated using a small IEEE 30-bus system modeled using appropriate discrete-time components and simulated measurements with Gaussian noise as well as gross errors.  more » « less
Award ID(s):
2137282
PAR ID:
10514987
Author(s) / Creator(s):
;
Corporate Creator(s):
Editor(s):
Karakaya, Bora; Collins, Randy
Publisher / Repository:
IEEE
Date Published:
Journal Name:
Proceedings of the Annual North American Power Symposium
Edition / Version:
1.0
Volume:
1
Issue:
1
ISSN:
0895-4097
ISBN:
979-8-3503-1509-7
Page Range / eLocation ID:
1 to 6
Subject(s) / Keyword(s):
Least absolute value discrete time modeling state estimation inverter-based resources.
Format(s):
Medium: X Size: 1MB Other: pdf
Size(s):
1MB
Location:
Asheville, NC, USA
Sponsoring Org:
National Science Foundation
More Like this
  1. (, Proceedings of the 52nd Frontiers of Power Conference)
    null (Ed.)
    Increased capacity associated with renewable energy sources has created a need for improved methods for controlling power flows from inverter-based generation. This research provides a comparative study of finite-control-set model predictive current control (FCS-MPC-based) with respect to conventional proportional-integral-based (PI-based) synchronous current control for a three-phase voltage source inverter (VSI). The inverter is accompanied by an inductive-capacitive-inductive (LCL) filter to attenuate pulse width modulation (PWM) switching harmonics. However, an LCL filter introduces a resonance near to the control stability boundary, giving rise to substantial complexity from a control perspective. In order to avoid potential instability caused by the resonance, active damping can be included in the PI-based current control. Though properly designed active damping can improve inverter stability, in practice the robustness of standard PI control is not attainable due to variability in the grid inductance at the point of common coupling (PCC). This is due to impedance variations causing large shifts in the LCL resonance frequency. Weak grid conditions (i.e., a low short-circuit ratio) and a correspondingly high line impedance are particularly susceptible to LCL induced resonance instabilities. As an approach to operate with grid impedance variations and weak grid conditions, FCS-MPC has the potential to produce superior performance compared to PI-based current control methods. This comparative study indicates that FCS-MPC has improved resonance damping and fast dynamic capability in a system with renewable energy sources under weak grid conditions. Detailed results from MATLAB/SimPower are presented to validate the suggested FCS-MPC method where it is robust to uncertainty in the grid impedance variations. Overall results indicate an improvement over conventional PI-based current control methods. 
    more » « less
  2. ; (, IEEE Power and Energy Magazine)
    WAVEFORMS ARE THE MOST GRANULAR ANDauthentic representation of voltage and current in power systems. With the latest advancements in power system measurement technologies, it is now possible to obtain time-synchronized waveform measurements, i.e., synchrowaveforms, from different locations of a power system. The measurement technology to obtain synchro-waveforms is referred to as a waveform measurement unit (WMU). WMUs can capture the most inconspicuous disturbances that are overlooked by other types of time-synchronized sensors, such as phasor measurement units (PMUs). WMUs also monitor system dynamics at much higher frequencies as well as much lower frequencies than the fundamental components of voltage and current that are commonly monitored by PMUs. Thus, synchro-waveforms introduce a ew frontier to advance power system and equipment monitoring and control, with direct applications in situational awareness, system dynamics tracking, incipient fault detection and identification, condition monitoring, and so on. They also play a critical role in monitoring inverter-based resources (IBR) due to the high-frequency switching characteristics of IBRs. Accordingly, in this article, we provide a high-level overview of this new and emerging technology and its implications, discussing the latest advancements in the new field of synchro waveforms, including basic principles, real-world examples, potentials in data analytics, and innovative applications 
    more » « less
  3. ; (, IEEE)
    The decline of conventional synchronous generators in the modern power system is driven by the increasing demand for low-inertia/inertia-less renewable energy sources (RES), consequently leading to the growing integration of inverter-based resources (IBRs) into the power system. The incorporation of low-inertia/inertia-less IBRs makes the monitoring and damping of low-frequency electromechanical oscillations (EMOs) crucial. While Virtual Synchronous Generator (VSG) control introduces virtual inertia into the power system, it does not maximize energy capture from RES as effectively as maximum power point tracking (MPPT) does, as it should maintain a power reserve to provide the inertial support and damping. In this study, switching IBRs between MPPT and VSG controls based on an EMO index (EMOI) threshold is proposed to mitigate the emergence of EMO. The impact of the switching control of IBRs is illustrated for a modified two-area, four-machine power system with two large solar photovoltaic plants. Typical results are presented from a simulation on real-time digital simulator (RTDS) to show improved EMOI. 
    more » « less
  4. ; ; (, Energies)
    The growing penetration of renewable resources such as wind and solar into the electric power grid through power electronic inverters is challenging grid protection. Due to the advanced inverter control algorithms, the inverter-based resources present fault responses different from conventional generators, which can fundamentally affect the way that the power grid is protected. This paper studied solar inverter dynamics focused on negative-sequence quantities during the restoration period following a grid disturbance by using a real-time digital simulator. It was found that solar inverters can act as negative-sequence sources to inject negative-sequence currents into the grid during the restoration period. The negative-sequence current can be affected by different operating conditions such as the number of inverters in service, grid strength, and grid fault types. Such negative-sequence responses can adversely impact the performance of protection schemes based on negative-sequence components and potentially cause relay maloperations during the grid restoration period, thus making system protection less secure and reliable. 
    more » « less
  5. ; ; ; (, 2019 IEEE Power & Energy Society General Meeting (PESGM))
    null (Ed.)
    With the increasing integration of renewable energy, the problems associated with deteriorating grid frequency profile and potential power system instability have become more significant. In this paper, the inertial control algorithm using Virtual Synchronous Generator (VSG) is implemented on type-4 Permanent Magnet Synchronous Generator (PMSG) - wind turbine generator (WTG). The overall nonlinear dynamic model and its small-signal linearization of PMSG-WTG using VSG is established and comprehensively analyzed. Inevitably, the direct application of VSG introduces large inertia which causes conflict between the fast-varying of available wind power and inverter control with slow dynamics, particularly in region 2 of wind turbine. Aiming to address such issue, VSG with multiple virtual rotating masses is proposed in order to improve the active power tracking performance as well as to boost inertial control of a VSG. The inertial responses are verified in a modified 10MVA IEEE 14 bus microgrid system. The assessment of the simulation results demonstrates the applicability of VSG on renewable energy generation units. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email