More Like this

1. Comparison of Proximal Leg Strain in Locomotor Model Organisms Using Robotic Legs

   Dinges, G.F.; Zyhowski, W.P.; Goldsmith, C.A.; Szczecinski, N.S. (August 2023, Biomimetic and Biohybrid Systems. Living Machines 2023.)

   Meder, F.; Hunt, A.; Margheri, L.; Mura, A.; Mazzolai, B. (Ed.)

   Insects use various sensory organs to monitor proprioceptive and exteroceptive information during walking. The measurement of forces in the exoskeleton is facilitated by campaniform sensilla (CS), which monitor resisted muscle forces through the detection of exoskeletal strains. CS are commonly found in leg segments arranged in fields, groups, or as single units. Most insects have the highest density of sensor locations on the trochanter, a proximal leg segment. CS are arranged homologously across species, suggesting comparable functions despite noted morphological differences. Furthermore, the trochanter–femur joint is mobile in some species and fused in others. To investigate how different morphological arrangements influence strain sensing in different insect species, we utilized two robotic models of the legs of the fruit fly Drosophila melanogaster and the stick insect Carausius morosus. Both insect species are past and present model organisms for unraveling aspects of motor control, thus providing extensive information on sensor morphology and, in-part, function. The robotic models were dynamically scaled to the legs of the insects, with strain gauges placed with correct orientations according to published data. Strains were detected during stepping on a treadmill, and the sensor locations and leg morphology played noticeable roles in the strains that were measured. Moreover, the sensor locations that were absent in one species relative to the other measured strains that were also being measured by the existing sensors. These findings contributed to our understanding of load sensing in animal locomotion and the relevance of sensory organ morphology in motor control. 

   more » « less
2. Load Feedback from a Dynamically Scaled Robotic Model of Carausius Morosus Middle Leg

   Zyhowski, William P.; Zill, Sasha N.; Szczecinski, Nicholas S. (December 2022, Biomimetic and Biohybrid Systems. Living Machines 2022.)

   Hunt, Alexander; Vouloutsi, Vasiliki; Moses, Kenneth; Quinn, Roger; Mura, Anna; Prescott, Tony; Verschure, Paul F. (Ed.)

   Load sensing is critical for walking behavior in animals, who have evolved a number of sensory organs and neural systems to improve their agility. In particular, insects measure load on their legs using campaniform sensilla (CS), sensory neurons in the cuticle of high-stress portions of the leg. Extracellular recordings from these sensors in a behaving animal are difficult to collect due to interference from muscle potentials, and some CS groups are largely inaccessible due to their placement on the leg. To better understand what loads the insect leg experiences and what sensory feedback the nervous system may receive during walking, we constructed a dynamically-scaled robotic model of the leg of the stick insect Carausius morosus. We affixed strain gauges in the same positions and orientations as the major CS groups on the leg, i.e., 3, 4, 6A, and 6B. The robotic leg was mounted to a vertically-sliding linear guide and stepped on a treadmill to simulate walking. Data from the strain gauges was run through a dynamic model of CS discharge developed in a previous study. Our experiments reveal stereotypical loading patterns experienced by the leg, even as its weight and joint stiffness is altered. Furthermore, our simulated CS strongly signal the beginning and end of stance phase, two key events in the coordination of walking. 

   more » « less
3. A parametric finite element model of leg campaniform sensilla in Drosophila to study campaniform sensilla location and arrangement

   https://doi.org/10.1098/rsif.2024.0559  

   Saltin, Brian D; Goldsmith, Clarus; Haustein, Moritz; Büschges, Ansgar; Szczecinski, Nicholas S; Blanke, Alexander (May 2025, Journal of The Royal Society Interface)

   Campaniform sensilla (CS) are mechanosensors embedded in the cuticle of insects. They are often found at locations near the joints of leg segments. On legs, CS are generally considered to respond directionally to cuticle bending during legged locomotion. It is currently unclear how CS locations affect strain levels at the CS, but this information is crucial for understanding how CS respond to stimuli. Here we present a parametric finite element model of the femoral CS field forDrosophilahind legs with 12 general and seven CS-specific parameters each. This model allows testing how changes in CS location, orientation and material property affect strain levels at each CS. We used experimentally acquired kinematic data and computed ground reaction forces to simulatein vivo-like forward stepping. The displacements found in this study at the physiological CS field location near the trochanter–femur joint are smaller than those necessary for conformation changes of ion channels involved in signal elicitation. Also, variation of material properties of the CS had little influence on displacement magnitudes at the CS cap where the sensory neuron attaches. Thus, our results indicate that ground reaction forces alone are unlikely to serve CS field activation during forward walking. 

   more » « less
4. Effects of Tarsal Morphology on Load Feedback During Stepping of a Robotic Stick Insect (Carausius Morosus) Limb

   https://doi.org/10.1007/978-3-031-38857-6_32  

   Goldsmith, Clarus A; Zyhowski, William P; Büschges, Ansgar; Zill, Sasha N; Dinges, Gesa F; Szczecinski, Nicholas S (August 2023, Springer, Cham.)

   Sensory feedback from sense organs during animal locomotion can be heavily influenced by an organism’s mechanical structure. In insects, the interplay between sensing and mechanics can be demonstrated in the campaniform sensilla (CS) strain sensors located across the exoskeleton. Leg CS are highly sensitive to the loading state of the limb. In walking, loading is primarily influenced by ground reaction forces (GRF) mediated by the foot, or tarsus. The complex morphology of the tarsus provides compliance, passive and active substrate grip, and an increased moment arm for the GRF, all of which impact leg loading and the resulting CS discharge. To increase the biomimicry of robots we use to study strain feedback during insect walking, we have developed a series of tarsi for our robotic model of a Carausius morosus middle leg. We seek the simplest design that mimics tarsus functionality. Tarsi were designed with varying degrees of compliance, passive grip, and biomimetic structure. We created elastic silicone tarsal joints for several of these models and found that they produced linear stiffness within joint limits across different joint morphologies. Strain gauges positioned in CS locations on the trochanterofemur and tibia recorded strain while the leg stepped on a treadmill. Most, but not all, designs increased axial strain magnitude compared to previous data with no tarsus. Every tarsus design produced positive transversal strain in the tibia, indicating axial torsion in addition to bending. Sudden increases in tibial strain reflected leg slipping during stance. This data show how different aspects of the tarsus may mediate leg loading, allowing us to improve the mechanical biomimicry of future robotic test platforms. 

   more » « less
5. Effects of Tarsal Morphology on Load Feedback During Stepping of a Robotic Stick Insect (Carausius Morosus) Limb

   Goldsmith, C.A.; Zyhowski, W.P.; Büschges, A.; Zill, S.N.; Dinges, G.F.; Szczecinski, N.S. (August 2023, Biomimetic and Biohybrid Systems. Living Machines 2023.)

   Meder, F.; Hunt, A.; Margheri, L.; Mura, A.; Mazzolai, B. (Ed.)

   Sensory feedback from sense organs during animal locomotion can be heavily influenced by an organism’s mechanical structure. In insects, the interplay between sensing and mechanics can be demonstrated in the campaniform sensilla (CS) strain sensors located across the exoskeleton. Leg CS are highly sensitive to the loading state of the limb. In walking, loading is primarily influenced by ground reaction forces (GRF) mediated by the foot, or tarsus. The complex morphology of the tarsus provides compliance, passive and active substrate grip, and an increased moment arm for the GRF, all of which impact leg loading and the resulting CS discharge. To increase the biomimicry of robots we use to study strain feedback during insect walking, we have developed a series of tarsi for our robotic model of a Carausius morosus middle leg. We seek the simplest design that mimics tarsus functionality. Tarsi were designed with varying degrees of compliance, passive grip, and biomimetic structure. We created elastic silicone tarsal joints for several of these models and found that they produced linear stiffness within joint limits across different joint morphologies. Strain gauges positioned in CS locations on the trochanterofemur and tibia recorded strain while the leg stepped on a treadmill. Most, but not all, designs increased axial strain magnitude compared to previous data with no tarsus. Every tarsus design produced positive transversal strain in the tibia, indicating axial torsion in addition to bending. Sudden increases in tibial strain reflected leg slipping during stance. This data show how different aspects of the tarsus may mediate leg loading, allowing us to improve the mechanical biomimicry of future robotic test platforms. 

   more » « less