An official website of the United States government
Insect load sensors, called campaniform sensilla (CS), measure strain changes within the cuticle of appendages. This mechanotransduction provides the neuromuscular system with feedback for posture and locomotion. Owing to their diverse morphology and arrangement, CS can encode different strain directions. We used nano-computed tomography and finite-element analysis to investigate how different CS morphologies within one location—the femoral CS field of the leg in the fruit fly Drosophila —interact under load. By investigating the influence of CS substructures' material properties during simulated limb displacement with naturalistic forces, we could show that CS substructures (i.e. socket and collar) influence strain distribution throughout the whole CS field. Altered socket and collar elastic moduli resulted in 5% relative differences in displacement, and the artificial removal of all sockets caused differences greater than 20% in cap displacement. Apparently, CS sockets support the distribution of distal strain to more proximal CS, while collars alter CS displacement more locally. Harder sockets can increase or decrease CS displacement depending on sensor location. Furthermore, high-resolution imaging revealed that sockets are interconnected in subcuticular rows. In summary, the sensitivity of individual CS is dependent on the configuration of other CS and their substructures.
more »
« less
This content will become publicly available on May 1, 2026
A parametric finite element model of leg campaniform sensilla in Drosophila to study campaniform sensilla location and arrangement
Campaniform sensilla (CS) are mechanosensors embedded in the cuticle of insects. They are often found at locations near the joints of leg segments. On legs, CS are generally considered to respond directionally to cuticle bending during legged locomotion. It is currently unclear how CS locations affect strain levels at the CS, but this information is crucial for understanding how CS respond to stimuli. Here we present a parametric finite element model of the femoral CS field forDrosophilahind legs with 12 general and seven CS-specific parameters each. This model allows testing how changes in CS location, orientation and material property affect strain levels at each CS. We used experimentally acquired kinematic data and computed ground reaction forces to simulatein vivo-like forward stepping. The displacements found in this study at the physiological CS field location near the trochanter–femur joint are smaller than those necessary for conformation changes of ion channels involved in signal elicitation. Also, variation of material properties of the CS had little influence on displacement magnitudes at the CS cap where the sensory neuron attaches. Thus, our results indicate that ground reaction forces alone are unlikely to serve CS field activation during forward walking.
more »
« less
- Award ID(s):
- 2015317
- PAR ID:
- 10627448
- Publisher / Repository:
- The Royal Society Publishing
- Date Published:
- Journal Name:
- Journal of The Royal Society Interface
- Volume:
- 22
- Issue:
- 226
- ISSN:
- 1742-5662
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract During walking, sensory information is measured and monitored by sensory organs that can be found on and within various limb segments. Strain can be monitored by insect load sensors, campaniform sensilla (CS), which have components embedded within the exoskeleton. CS vary in eccentricity, size, and orientation, which can affect their sensitivity to specific strains. Directly investigating the mechanical interfaces that these sensors utilize to encode changes in load bears various obstacles, such as modeling of viscoelastic properties. To circumvent the difficulties of modeling and performing biological experiments in small insects, we developed 3-dimensional printed resin models based on high-resolution imaging of CS. Through the utilization of strain gauges and a motorized tensile tester, physiologically plausible strain can be mimicked while investigating the compression and tension forces that CS experience; here, this was performed for a field of femoral CS inDrosophila melanogaster. Different loading scenarios differentially affected CS compression and the likely neuronal activity of these sensors and elucidate population coding of stresses acting on the cuticle.more » « less
-
Force sensing is advantageous in walking and can signal leg slipping that could destabilize support of body weight, prior to changes in body position. Recordings of strain-detecting campaniform sensilla in blow fly legs showed force encoding in ranges reflecting their minimal body weight but firing was also inhibited by very small transient force decreases. A mathematical model of the receptors reproduced these characteristics and could aid in control of walking machines, independent of size and mass.more » « less
-
Insects use various sensory organs to monitor proprioceptive and exteroceptive information during walking. The measurement of forces in the exoskeleton is facilitated by campaniform sensilla (CS), which monitor resisted muscle forces through the detection of exoskeletal strains. CS are commonly found in leg segments arranged in fields, groups, or as single units. Most insects have the highest density of sensor locations on the trochanter, a proximal leg segment. CS are arranged homologously across species, suggesting comparable functions despite noted morphological differences. Furthermore, the trochanter–femur joint is mobile in some species and fused in others. To investigate how different morphological arrangements influence strain sensing in different insect species, we utilized two robotic models of the legs of the fruit fly Drosophila melanogaster and the stick insect Carausius morosus. Both insect species are past and present model organisms for unraveling aspects of motor control, thus providing extensive information on sensor morphology and, in-part, function. The robotic models were dynamically scaled to the legs of the insects, with strain gauges placed with correct orientations according to published data. Strains were detected during stepping on a treadmill, and the sensor locations and leg morphology played noticeable roles in the strains that were measured. Moreover, the sensor locations that were absent in one species relative to the other measured strains that were also being measured by the existing sensors. These findings contributed to our understanding of load sensing in animal locomotion and the relevance of sensory organ morphology in motor control.more » « less
-
Meder, F.; Hunt, A.; Margheri, L.; Mura, A.; Mazzolai, B. (Ed.)Insects use various sensory organs to monitor proprioceptive and exteroceptive information during walking. The measurement of forces in the exoskeleton is facilitated by campaniform sensilla (CS), which monitor resisted muscle forces through the detection of exoskeletal strains. CS are commonly found in leg segments arranged in fields, groups, or as single units. Most insects have the highest density of sensor locations on the trochanter, a proximal leg segment. CS are arranged homologously across species, suggesting comparable functions despite noted morphological differences. Furthermore, the trochanter–femur joint is mobile in some species and fused in others. To investigate how different morphological arrangements influence strain sensing in different insect species, we utilized two robotic models of the legs of the fruit fly Drosophila melanogaster and the stick insect Carausius morosus. Both insect species are past and present model organisms for unraveling aspects of motor control, thus providing extensive information on sensor morphology and, in-part, function. The robotic models were dynamically scaled to the legs of the insects, with strain gauges placed with correct orientations according to published data. Strains were detected during stepping on a treadmill, and the sensor locations and leg morphology played noticeable roles in the strains that were measured. Moreover, the sensor locations that were absent in one species relative to the other measured strains that were also being measured by the existing sensors. These findings contributed to our understanding of load sensing in animal locomotion and the relevance of sensory organ morphology in motor control.more » « less
