More Like this

1. Hydrogen Dissolution Mechanisms in Bridgmanite by First‐Principles Calculations and Infrared Spectroscopy

   https://doi.org/10.1029/2024JB030403  

   Zhang, Yanyao; Tsuchiya, Jun; Li, ChingChien; Ye, Zefang; Yan, Wei; Okuchi, Takuo; Karato, Shun‐ichiro; Kung, Jennifer; Lin, Jung‐Fu (January 2025, Journal of Geophysical Research: Solid Earth)

   Abstract Understanding hydrogen dissolution mechanisms in bridgmanite (Bgm), the most abundant mineral in the lower mantle, is essential for understanding water storage and rheological and transport properties in the region. However, interpretations of O‐H bands in Fourier transform infrared spectroscopy (FTIR) spectra of Bgm crystals remain uncertain. We conducted density functional theory (DFT) calculations on vibrational characteristics of O‐H dipoles and performed polarized FTIR measurements to address this issue. DFT calculations for four substitution models—Mg vacancies, Si vacancies, Al³⁺ + H⁺substitution for Si⁴⁺, and Al substitution with Mg vacancies—reveal distinct O‐H bands with different polarizations. Deconvolution of polarized FTIR spectra on Mg_0.88Fe²⁺_0.035Fe³⁺_0.065Al_0.14Si_0.90O₃and Mg_0.95Fe²⁺_0.033Fe³⁺_0.027Al_0.04Si_0.96O₃crystals shows five major O‐H bands with distinct polarizations along principal crystallographic axes. These experimental and calculated results attribute O‐H bands centered at 3,463–3,480, 2,913–2,924, and 2,452–2,470 cm⁻¹to Mg vacancies, Si vacancies, and Al³⁺ + H⁺substitution for Si⁴⁺, respectively. The total absorbance coefficient of bridgmanite was calculated to be 82,702(6,217) L/mol/cm². Mg and Si vacancies account for 43%–74% of the total water content, making them dominant hydrogen dissolution mechanisms in Bgm. The band frequencies for the Mg and Si vacancies in Bgm are drastically different from those in olivine and ringwoodite, corresponding to the significant changes in O‐H bond strengths and in the Si and Mg coordination environments from upper‐mantle to lower‐mantle minerals. These results highlight the need to incorporate hydrogen dissolution mechanisms in Bgm for understanding electrical conductivity and rheology of the lower mantle. 

   more » « less
2. Single-crystal elasticity of (Al,Fe)-bearing bridgmanite up to 82 GPa

   https://doi.org/10.2138/am-2022-8435  

   Fu, Suyu; Zhang, Yanyao; Okuchi, Takuo; Lin, Jung-Fu (April 2023, American Mineralogist)

   Abstract Thermoelastic properties of mantle candidate minerals are essential to our understanding of geophysical phenomena, geochemistry, and geodynamic evolutions of the silicate Earth. However, the lower-mantle mineralogy remains much debated due to the lack of single-crystal elastic moduli (Cij) and aggregate sound velocities of (Al,Fe)-bearing bridgmanite, the most abundant mineral of the planet, at the lower mantle pressure-temperature (P-T) conditions. Here we report single-crystal Cij of (Al,Fe)-bearing bridgmanite, Mg0.88Fe0.1Al0.14Si0.90O3 (Fe10-Al14-Bgm) with Fe3+/ΣFe = ~0.65, up to ~82 GPa using X-ray diffraction (XRD), Brillouin light scattering (BLS), and impulsive stimulated light scattering (ISLS) measurements in diamond-anvil cells (DACs). Two crystal platelets with orientations of (–0.50, 0.05, –0.86) and (0.65, –0.59, 0.48), that are sensitive to deriving all nine Cij, are used for compressional and shear wave velocity (νP and νS) measurements as a function of azimuthal angles over 200° at each experimental pressure. Our results show that all Cij of singe-crystal Fe10-Al14-Bgm increase monotonically with pressure with small uncertainties of 1–2% (±1σ), except C55 and C23, which have uncertainties of 3–4%. Using the third-order Eulerian finite-strain equations to model the elasticity data yields the aggregate adiabatic bulk and shear moduli and respective pressure derivatives at the reference pressure of 25 GPa: KS = 326 ± 4 GPa, µ = 211 ± 2 GPa, KS′ = 3.32 ± 0.04, and µ′ = 1.66 ± 0.02 GPa. The high-pressure aggregate νS and νP of Fe10-Al14-Bgm are 2.6–3.5% and 3.1–4.7% lower than those of MgSiO3 bridgmanite end-member, respectively. These data are used with literature reports on bridgmanite with different Fe and Al contents to quantitatively evaluate pressure and compositional effects on their elastic properties. Comparing with one-dimensional seismic profiles, our modeled velocity profiles of major lower-mantle mineral assemblages at relevant P-T suggest that the lower mantle could likely consist of about 89 vol% (Al,Fe)-bearing bridgmanite. After considering uncertainties, our best-fit model is still indistinguishable from pyrolitic or chondritic models. 

   more » « less
3. Hydrogen Diffusion in the Lower Mantle Revealed by Machine Learning Potentials

   https://doi.org/10.1029/2023JB028333  

   Peng, Yihang; Deng, Jie (April 2024, Journal of Geophysical Research: Solid Earth)

   Abstract Hydrogen may be incorporated into nominally anhydrous minerals including bridgmanite and post‐perovskite as defects, making the Earth's deep mantle a potentially significant water reservoir. The diffusion of hydrogen and its contribution to the electrical conductivity in the lower mantle are rarely explored and remain largely unconstrained. Here we calculate hydrogen diffusivity in hydrous bridgmanite and post‐perovskite, using molecular dynamics simulations driven by machine learning potentials of ab initio quality. Our findings reveal that hydrogen diffusivity significantly increases with increasing temperature and decreasing pressure, and is considerably sensitive to hydrogen incorporation mechanism. Among the four defect mechanisms examined, (Mg + 2H)_Siand (Al + H)_Sishow similar patterns and yield the highest hydrogen diffusivity. Hydrogen diffusion is generally faster in post‐perovskite than in bridgmanite, and these two phases exhibit distinct diffusion anisotropies. Overall, hydrogen diffusion is slow on geological time scales and may result in heterogeneous water distribution in the lower mantle. Additionally, the proton conductivity of bridgmanite for (Mg + 2H)_Siand (Al + H)_Sidefects aligns with the same order of magnitude of lower mantle conductivity, suggesting that the water distribution in the lower mantle may be inferred by examining the heterogeneity of electrical conductivity. 

   more » « less
4. Synthesis, Elasticity, and Spin State of an Intermediate MgSiO ₃ ‐FeAlO ₃ Bridgmanite: Implications for Iron in Earth's Lower Mantle

   https://doi.org/10.1029/2020JB019964  

   Zhu, Feng; Liu, Jiachao; Lai, Xiaojing; Xiao, Yuming; Prakapenka, Vitali; Bi, Wenli; Alp, E. Ercan; Dera, Przemyslaw; Chen, Bin; Li, Jie (July 2020, Journal of Geophysical Research: Solid Earth)

   Abstract Fe‐Al‐bearing bridgmanite may be the dominant host for ferric iron in Earth's lower mantle. Here we report the synthesis of (Mg_0.5Fe³⁺_0.5)(Al_0.5Si_0.5)O₃bridgmanite (FA50) with the highest Fe³⁺‐Al³⁺coupled substitution known to date. X‐ray diffraction measurements showed that at ambient conditions, the FA50 adopted the LiNbO₃structure. Upon compression at room temperature to 18 GPa, it transformed back into the bridgmanite structure, which remained stable up to 102 GPa and 2,600 K. Fitting Birch‐Murnaghan equation of state of FA50 bridgmanite yieldsV₀ = 172.1(4) ų,K₀ = 229(4) GPa withK₀′ = 4(fixed). The calculated bulk sound velocity of the FA50 bridgmanite is ~7.7% lower than MgSiO₃bridgmanite, mainly because the presence of ferric iron increases the unit‐cell mass by 15.5%. This difference likely represents the upper limit of sound velocity anomaly introduced by Fe³⁺‐Al³⁺substitution. X‐ray emission and synchrotron Mössbauer spectroscopy measurements showed that after laser annealing, ~6% of Fe³⁺cations exchanged with Al³⁺and underwent the high‐ to low‐spin transition at 59 GPa. The low‐spin proportion of Fe³⁺increased gradually with pressure and reached 17–31% at 80 GPa. Since the cation exchange and spin transition in this Fe³⁺‐Al³⁺‐enriched bridgmanite do not cause resolvable unit‐cell volume reduction, and the increase of low‐spin Fe³⁺fraction with pressure occurs gradually, the spin transition would not produce a distinct seismic signature in the lower mantle. However, it may influence iron partitioning and isotopic fractionation, thus introducing chemical heterogeneity in the lower mantle. 

   more » « less
5. Phase transformation of ferric-iron-rich silicate in Earth’s mid-mantle

   https://doi.org/10.2138/am-2024-9410  

   Lv, Mingda; Zhu, Shengcai; Liu, Jiachao; Hu, Yi; Zhu, Feng; Lai, Xiaojing; Zhang, Dongzhou; Chen, Bin; Dera, Przemyslaw; Li, Jie; et al (July 2024, American Mineralogist)

   Abstract Incorporation of ferric iron in mantle silicates stabilizes different crystal structures and changes phase transition conditions, thus impacting seismic wave speeds and discontinuities. In MgSiO3-Fe2O3 mixtures, recent experiments indicate the coexistence of fully oxidized iron-rich (Mg0.5Fe0.53+)(Fe0.53+Si0.5)O3 with Fe-poor silicate (wadsleyite or bridgmanite) and stishovite at 15 to 27 GPa and 1773 to 2000 K, conditions relevant to subducted lithosphere in the Earth’s transition zone and uppermost lower mantle. X-ray diffraction measurements show that (Mg0.5Fe0.53+)(Fe0.53+Si0.5)O3 recovered from these conditions adopts the R3c LiNbO3-type structure, which transforms to the bridgmanite structure again between 18.3 GPa and 24.7 GPa at 300 K. Diffraction observations are used to obtain the equation of state of the LiNbO3-type phase up to 18.3 GPa. These observations combined with multi-anvil experiments suggest that the stable phase of (Mg0.5Fe0.53+)(Fe0.53+Si0.5)O3 is bridgmanite at 15-27 GPa, which transforms on decompression to LiNbO3-type structure. Our calculation revealed that ordering of the ferric ion reduces the kinetic energy barrier of the transition between (Mg0.5Fe0.53+)(Fe0.53+Si0.5)O3 LiNbO3 structure and bridgmanite relative to the MgSiO3 akimotoite-bridgmanite system. Dense Fe3+-rich bridgmanite structure is thus stable at substantially shallower depths than MgSiO3 bridgmanite and would promote subduction. 

   more » « less