skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Improving Absorbent-Enhanced Ammonia Separation For Efficient Small-Scale Ammonia Synthesis
Synthesized ammonia exiting a reactor with hydrogen and nitrogen can be selectively absorbed by MgCl2 for renewable absorbent-based Haber-Bosch for dispersed ammonia manufacturing. Such separation can be more efficient even at elevated temperatures compared to the condensation method used in the conventional Haber-Bosch process. To determine the optimal conditions to capture and release the most ammonia per thermal cycle of the sorbent salt, the sorbent capacity was measured with varying regeneration temperature, regeneration time, and sweep rate under steady-state cycling conditions. In all cases, uptake was limited to bed breakthrough, and cyclic steady state was achieved. By using a lower temperature for MgCl2 regeneration (200 °C), the working capacities were maintained comparable to those at higher desorption temperatures (∼400 °C), even without the use of inert sweep gas. Using a sufficiently high regeneration temperature (∼200 °C) allowed for sufficiently low sweep gas so that the product ammonia can exceed 72 mol % purity in a mixture of N2 and H2. These results were achieved with a short regeneration time of 20 min or less, which is an improvement from the hour-long regeneration time previously reported. These measurements identified new operating parameters for more efficient absorber design to produce economical renewable ammonia at small scale.  more » « less
Award ID(s):
2152119
PAR ID:
10522752
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
Industrial and Engineering Chemistry Research
Date Published:
Journal Name:
Industrial & Engineering Chemistry Research
Volume:
63
Issue:
13
ISSN:
0888-5885
Page Range / eLocation ID:
5608 to 5617
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Biomass, Biofuels, Biochemicals)
    Murthy, G. S.; Gnansounou, E.; Khanal, S. K.; Pandey, A. (Ed.)
    The Haber–Bosch synthesis of ammonia is an energy-intensive process that uses coal or natural gas as a fuel and feed. Direct electrochemical nitrogen reduction represents a potential alternative to the Haber–Bosch process that can be less polluting. This alternative route to ammonia from dinitrogen is not likely to require the same large capital investments as does the Haber–Bosch process, thus suggesting a distributive production structure of ammonia relative to the existing ammonia industry. In addition, the flexibility borne from the use of electrochemistry yields technologies that are better fit for the use of renewable energy sources that supply intermittent electricity. We show that under certain scenarios, at levels of efficiency (as determined by the required overpotential and the Faradaic efficiency) that might reasonably be achieved, direct electrochemical nitrogen reduction would be a sustainable and economically viable alternative to the Haber–Bosch process. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Nature Reviews Clean Technology)
    Synthetic ammonia production by the Haber–Bosch process revolutionized agriculture by making relatively inexpensive nitrogen (N) fertilizer widely available and enabling a rise in global food production1,2. The Haber–Bosch process relies on fossil fuels (known as grey ammonia production) and emits more than 450 Mt of CO2 annually3. Green ammonia, which is produced using renewable energy, offers a pathway to decouple ammonia production from fossil fuels and reduce CO2 emissions. As a carbon-free fuel, green ammonia could partially replace fossil fuels to decarbonize hard-to-abate sectors such as maritime shipping4. However, the widespread use of green ammonia could have complex environmental and social consequences, as it threatens to add reactive N into the biosphere3 and could disrupt fertilizer markets. In this Comment, we identify opportunities, barriers and open questions related to green ammonia production and usage as a fertilizer and beyond. We then recommend research priorities to avoid unforeseen consequences through research, monitoring and adaptation in real time. 
    more » « less
  3. ; ; (, Journal of Catalysts)
    High-temperature solid-state electrochemical synthesis of ammonia is a promising route for clean, sus- tainable and on-demand small-scale production of ammonia with lower energy consumption compared to the conventional Haber-Bosch process. Despite of its significant potential, there are still many aspects of this process that remain unexplored. In this mini-review article, the literature on high-temperature solid-state electrochemical ammonia production was summarized, the current state of the process was discussed and the necessary steps that should be taken to move the solid-state electrochemical ammonia synthesis concept forward were discussed while addressing the current issues and concerns. 
    more » « less
  4. ; ; ; ; ; ; ; (, ECS advances)
    The conventional route for ammonia (NH3) production is the Haber-Bosch (HB) process, which converts nitrogen and hydrogen through a thermo-catalytic reaction at high temperatures and pressures. The HB process is not efficient or economical at smaller scales. Recent years have seen significant effort in producing ammonia electrocatalytically. While direct electrochemical synthesis of NH3 has been reported at low temperatures in aqueous media, studies on high-temperature electrocatalysis are much fewer. High-temperature routes have the potential to increase catalytic activity, lower the kinetic overpotential, and improve Faradaic efficiency for NH3 formation. The focus of the present study is high-temperature (600 °C) electrochemical synthesis of ammonia from N2 and H2O at atmospheric pressure in solid oxide electrolysis cell (SOEC)-type reactors. The catalytic material selection for the working electrode is one of the most important challenges in electrochemical processes. In this work, a composite cathode composed of a perovskite oxide and an iron oxynitride phase was investigated. Both phases were characterized thoroughly using XRD, XPS, Mössbauer spectroscopy, TPD/TPRxn, and 4-probe electrical conductivity techniques. The electrocatalytic activity experiments were performed on the perovskite oxide phase and the composite cathode to study the effect of using a composite electrode on the activity of the cell. 
    more » « less
  5. ; ; (, 2022 IEEE Power & Energy Society General Meeting (PESGM))
    Most large-scale ammonia production typically relies on natural gas or coal, which causes harmful carbon pollution to enter the atmosphere. The viability of a small-scale “green” ammonia plant is investigated where renewable electricity is used to provide hydrogen and nitrogen via electrolysis and air liquefaction, respectively, to a Haber-Bosch system to synthesize ammonia. A green ammonia plant can serve as a demandresponsive load to the electricity distribution system and provide long-term energy storage through chemical energy storage in ammonia. A coordinated operational model of an electricity distribution system and an electricity-run ammonia plant is proposed in this paper. Case studies are performed on a modified PG&E 69-node electricity distribution system coupled with a small-scale ammonia plant. Results indicate the ammonia plant can adequately serve as a demand response resource and positively impact the distribution locational marginal price (DLMP). 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email