skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Optical Dispersion Data Analysis of Single Crystal CH3NH3PbBr3 for Optimized Perovskite Solar Cell Active Layer Absorptance
Title: Optical Dispersion Data Analysis of Single Crystal CH3NH3PbBr3 for Optimized Perovskite Solar Cell Active Layer Absorptance
Proper derivation of CH3NH3PbX3 (CH3NH3+ = methyl ammonium or MA+; X- = Cl-, Br-, I-) optical constants is a critical step toward the development of high-performance electronic and optoelectronic perovskite devices. To date, the optical dispersion regimes at, above, and below the band gap of these materials have been inconsistently characterized by omitting or under-approximating anomalous spectral features (from ultraviolet to infrared wavelengths). In this report, we present the rigorous optical dispersion data analysis of single crystal MAPbBr3 involving variable angle spectroscopic ellipsometry data appended with transmission intensity data. This approach yields a more robust derivation of MAPbBr3 optical constants (refractive index, n, and extinction coefficient, k) for both anomalous (absorptance) and normal (no absorptance) optical dispersion regimes. Using the derived optical constants for our MAPbBr3 single crystals, illustrative modeled solar cell device designs are presented in relation to non-realistic designs prepared using representative optical constants reported in the literature to date. In comparison, our derived optical dispersion data enables the modeled design of realistic planar perovskite solar cell (PSC) optical performance where the active layer (MAPbBr3) is optimized for maximum solar radiation absorption. We further demonstrate optimized modeled planar PSC designs with minimal parasitic optical absorptance in non-active PSC device layers resulting in improved performance at broad angles of incidence (approximately 0-70°). Our robust derivation of MAPbBr3 optical properties is expected to impact the optical dispersion data analysis of all perovskite analogs and expedite targeted development of, for example, solar cell, light-emitting diode, photo and X-ray/γ-ray detector, and laser system technologies.  more » « less
Award ID(s):
1827745
PAR ID:
10523793
Author(s) / Creator(s):
; ; ; ; ; ; ;
Publisher / Repository:
Wiley-VCH GmbH
Date Published:
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Scientific Reports)
    Abstract In this paper, we use Polyethylene Oxide (PEO) particles to control the morphology of Formamidinium (FA)-rich perovskite films and achieve large grains with improved optoelectronic properties. Consequently, a planar perovskite solar cell (PSC) is fabricated with additions of 5 wt% of PEO, and the highest PCE of 18.03% was obtained. This solar cell is also shown to retain up to 80% of its initial PCE after about 140 h of storage under the ambient conditions (average relative humidity of 62.5 ± 3.25%) in an unencapsulated state. Furthermore, the steady-state PCE of the PEO-modified PSC device remained stable for long (over 2500 s) under continuous illumination. This addition of PEO particles is shown to enable the tuning of the optoelectronic properties of perovskite films, improvements in the overall photophysical properties of PSCs, and an increase in resistance to the degradation of PSCs. 
    more » « less
  2. ; ; ; (, Journal of Materials Chemistry A)
    In a mesoporous hybrid perovskite solar cell (PSC), the mesoporous scaffold plays key roles in controlling the crystallization of the perovskite material and in the charge carrier transport, and hence is critical for developing highly efficient PSCs. Here we report a study on blending micrometer-long TiO 2 nanorods (NRs) into the commonly used nanoparticles (NPs) to optimize the mesoporous structure, with the aim of enhancing the perovskite material loading and connectivity as well as light harvesting. It was found that with 5–10% of NR incorporation, a uniform scaffold can be spin-coated and the PSC performance was improved. In comparison to the pure NP-based device, the power conversion efficiency was increased by about 27% when 10% of the NRs were incorporated, due to enhanced light harvesting and charge collection. However, with more NR blending, a homogeneous scaffold cannot be formed, resulting in PSC performance degradation. These findings contribute to a better design of mesoporous scaffolds for high-performance PSCs. 
    more » « less
  3. ; ; ; ; (, Advanced Physics Research)
    Abstract Among promising applications of metal‐halide perovskite, the most research progress is made for perovskite solar cells (PSCs). Data from myriads of research work enables leveraging machine learning (ML) to significantly expedite material and device optimization as well as potentially design novel configurations. This paper represents one of the first efforts in providing open‐source ML tools developed utilizing the Perovskite Database Project (PDP), the most comprehensive open‐source PSC database to date with over 43 000 entries from published literature. Three ML model architectures with short‐circuit current density (Jsc) as a target are trained exploiting the PDP. Using the XGBoost architecture, a root mean squared error (RMSE) of 3.58 , R2of 0.35 and a mean absolute percentage error (MAPE) of 9.49% are achieved. This performance is comparable to results reported in literature, and through further investigation can likely be improved. To overcome challenges with manual database creation, an open‐source data cleaning pipeline is created for PDP data. Through the creation of these tools, which have been published on GitHub, this research aims to make ML available to aid the design for PSC while showing the already promising performance achieved. The tools can be adapted for other applications, such as perovskite light‐emitting diodes (PeLEDs), if a sufficient database is available. 
    more » « less
  4. ; ; ; ; ; ; ; (, IEEE journal of photovoltaics)
    The rapid rise in single-junction perovskite solar cell (PSC) efficiencies, tunable bandgap and low-cost solution processability make PSCs an attractive candidate for tandems with Si bottom cells. However, the challenge is to fabricate a high-performance semitransparent perovskite top cell in combination with an appropriate silicon bottom cell with high response to long wavelength photons that are filtered through the perovskite top cell. Currently, semitransparent perovskite cells show much lower performance compared to their opaque counterparts while high-performance silicon bottom cells, such as heterojunction with intrinsic thin layer (HIT) and interdigitated back contact (IBC), maybe too expensive to meet the cost and efficiency targets for commercial viability. Here, we demonstrate a 26.7% perovskite-Si four terminal (4T) tandem cell comprising a highly efficient 17.8% CsFAMAPbIBr semitransparent, 1.63-eV bandgap perovskite top cell and a ≥ 22% efficiency n-type Si bottom cell fabricated with a conventional boron diffused emitter on the front and carrier selective n+ poly-Si/SiOx passivated contact on the rear. This is among the highest efficiency perovskite/Si 4T tandems published to-date and represents the first demonstration of the use of the high temperature-resistant single side n-TOPCon Si cell in a 4T configuration. 
    more » « less
  5. ; ; ; ; (, Journal of Materials Informatics)
    Photonic curing (PC) can facilitate high-speed perovskite solar cell (PSC) manufacturing because it uses high-intensity light pulses to crystallize perovskite films in milliseconds. However, optimizing PC conditions is challenging due to its many variables, and using power conversion efficiency (PCE) as the optimization metric is both time-consuming and labor-intensive. This work presents a machine learning (ML) approach to optimize PC conditions for fabricating methylammonium lead iodide (MAPbI3) films by quantitatively comparing their ultraviolet-visible (UV-vis) absorbance spectra to thermal annealed (TA) films using four similarity metrics. We perform Bayesian optimization coupled with Gaussian process regression (BO-GP) to minimize the similarity metrics. Refining PC conditions using active learning based on BO-GP models, we achieve a PC MAPbI3 film with an absorbance spectrum closely matching a TA reference film, which is further verified by its crystalline and morphological properties. Thus, we demonstrate that the UV-vis absorption spectrum can accurately proxy film quality. Additionally, we use an AI-based segmentation model for a more efficient grain size analysis. However, when we use the optimized PC condition to fabricate PSCs, we find that interaction between MAPbI3 and the hole transport layer (HTL) during PC critically degrades the PSC performance. By adding a buffer layer between the HTL and MAPbI3, the optimized PC PSCs produce a champion PCE of 11.8%, comparable to the TA reference of 11.7%. Using UV-vis similarity metrics instead of device PCE as the objective in our BO-GP method accelerates the optimization of PC processing conditions for MAPbI3 films. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email