skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: From Liouville to Landauer: Electron transport and the bath assumptions made along the way
A generalized quantum master equation approach is introduced to describe electron transfer in molecular junctions that spans both the off-resonant (tunneling) and resonant (hopping) transport regimes. The model builds on prior insights from scattering theory but is not limited to a certain parameter range with regard to the strength of the molecule–electrode coupling. The framework is used to study the simplest case of energy and charge transfer between the molecule and the electrodes for a single site noninteracting Anderson model in the limit of symmetric and asymmetric coupling between the molecule and the electrodes. In the limit of elastic transport, the Landauer result is recovered for the current by invoking a single active electron Ansatz and a binary collision approximation for the memory kernel. Inelastic transport is considered by allowing the excitation of electron–hole pairs in the electrodes in tandem with charge transport. In the case of low bias voltages where the Fermi levels of the electrodes remain below the molecular state, it is shown that the current arises from tunneling and the molecule remains neutral. However, once the threshold is reached for aligning the fermi level of one electrode with the molecular orbital, a small amount of charge transfer occurs with a negligible amount of hopping current. While inelasticity in the current has a minimal impact on the shape of the current–voltage curve in the case of symmetric electrode coupling, the results for a slight asymmetry in coupling demonstrate complete charge transfer and a significant drop in current. These results provide encouraging confirmation that the framework can describe charge transport across a wide range of electrode–molecule coupling and provide a unique perspective for developing new master equation treatments for energy and charge transport in molecular junctions. An extension of this work to account for inelastic scattering from electron–vibrational coupling at the molecule is straightforward and will be the subject of subsequent work.  more » « less
Award ID(s):
1900423
PAR ID:
10526749
Author(s) / Creator(s):
;
Publisher / Repository:
AIP Publishing
Date Published:
Journal Name:
The Journal of Chemical Physics
Edition / Version:
1
Volume:
160
Issue:
18
ISSN:
0021-9606
Page Range / eLocation ID:
1-27
Subject(s) / Keyword(s):
Electronic transport Phonons Electronic coupling Hilbert space Inelastic scattering Operator theory Density-matrix Scattering theory Fermi-Dirac statistics
Format(s):
Medium: X Size: 1.6Mb Other: PDF
Size(s):
1.6Mb
Sponsoring Org:
National Science Foundation
More Like this
  1. (, Journal of Physics: Condensed Matter)
    Abstract In the present work we theoretically analyze thermoelectric transport in single-molecule junctions (SMJ) characterized by strong interactions between electrons on the molecular linkers and phonons in their nuclear environments where electron hopping between the electrodes and the molecular bridge states predominates in the steady state electron transport. The analysis is based on the modified Marcus theory accounting for the lifetime broadening of the bridge’s energy levels. We show that the reorganization processes in the environment accompanying electron transport may significantly affect SMJ thermoelectric properties both within and beyond linear transport regime. Specifically, we study the effect of environmental phonons on the electron conductance, the thermopower and charge current induced by the temperature gradient applied across the system. 
    more » « less
  2. ; ; ; (, Nanoscale)
    Conducting probe atomic force microscopy (CP-AFM) was employed to examine electron tunneling in self-assembled monolayer (SAM) junctions. A 2.3 nm long perylene tetracarboxylic acid diimide (PDI) acceptor molecule equipped with isocyanide linker groups was synthesized, adsorbed onto Ag, Au and Pt substrates, and the current–voltage ( I – V ) properties were measured by CP-AFM. The dependence of the low-bias resistance ( R ) on contact work function indicates that transport is LUMO-assisted (‘n-type behavior’). A single-level tunneling model combined with transition voltage spectroscopy (TVS) was employed to analyze the experimental I – V curves and to extract the effective LUMO position ε l = E LUMO − E F and the effective electronic coupling ( Γ ) between the PDI redox core and the contacts. This analysis revealed a strong Fermi level ( E F ) pinning effect in all the junctions, likely due to interface dipoles that significantly increased with increasing contact work function, as revealed by scanning Kelvin probe microscopy (SKPM). Furthermore, the temperature ( T ) dependence of R was found to be substantial. For Pt/Pt junctions, R varied more than two orders of magnitude in the range 248 K < T < 338 K. Importantly, the R ( T ) data are consistent with a single step electron tunneling mechanism and allow independent determination of ε l , giving values compatible with estimates of ε l based on analysis of the full I – V data. Theoretical analysis revealed a general criterion to unambiguously rule out a two-step transport mechanism: namely, if measured resistance data exhibit a pronounced Arrhenius-type temperature dependence, a two-step electron transfer scenario should be excluded in cases where the activation energy depends on contact metallurgy. Overall, our results indicate (1) the generality of the Fermi level pinning phenomenon in molecular junctions, (2) the utility of employing the single level tunneling model for determining essential electronic structure parameters ( ε l and Γ ), and (3) the importance of changing the nature of the contacts to verify transport mechanisms. 
    more » « less
  3. ; ; ; ; ; ; ; ; (, Chemical Science)
    The correlation of electron transfer with molecular conductance ( g : electron transport through single molecules) by Nitzan and others has contributed to a fundamental understanding of single-molecule electronic materials. When an unsymmetric, dipolar molecule spans two electrodes, the possibility exists for different conductance values at equal, but opposite electrode biases. In the device configuration, these molecules serve as rectifiers of the current and the efficiency of the device is given by the rectification ratio (RR = g forward / g reverse ). Experimental determination of the RR is challenging since the orientation of the rectifying molecule with respect to the electrodes and with respect to the electrode bias direction is difficult to establish. Thus, while two different values of g can be measured and a RR calculated, one cannot easily assign each conductance value as being aligned with or opposed to the molecular dipole, and calculations are often required to resolve the uncertainty. Herein, we describe the properties of two isomeric, triplet ground state biradical molecules that serve as constant-bias analogs of single-molecule electronic devices. Through established theoretical relationships between g and electronic coupling, H 2 , and between H 2 and magnetic exchange coupling, J ( g ∝ H 2 ∝ J ), we use the ratio of experimental J -values for our two isomers to calculate a RR for an unsymmetric bridge molecule with known geometry relative to the two radical fragments of the molecule and at a spectroscopically-defined potential bias. Our experimental results are compared with device transport calculations. 
    more » « less
  4. ; ; (, The Journal of Chemical Physics)
    We numerically isolate the limits of validity of the Landauer approximation to describe charge transport along molecular junctions in condensed phase environments. To do so, we contrast Landauer with exact time-dependent non-equilibrium Green’s function quantum transport computations in a two-site molecular junction subject to exponentially correlated noise. Under resonant transport conditions, we find Landauer accuracy to critically depend on intramolecular interactions. By contrast, under nonresonant conditions, the emergence of incoherent transport routes that go beyond Landauer depends on charging and discharging processes at the electrode–molecule interface. In both cases, decreasing the rate of charge exchange between the electrodes and molecule and increasing the interaction strength with the thermal environment cause Landauer to become less accurate. The results are interpreted from a time-dependent perspective where the noise prevents the junction from achieving steady-state and from a fully quantum perspective where the environment introduces dephasing in the dynamics. Using these results, we analyze why the Landauer approach is so useful to understand experiments, isolate regimes where it fails, and propose schemes to chemically manipulate the degree of transport coherence. 
    more » « less
  5. (, Journal of the American Chemical Society)
    null (Ed.)
    This paper addresses the mechanism for rectification in molecular tunneling junctions based on alkanethiolates terminated by a bipyridine group complexed with a metal ion, that is, having the structure AuTS-S(CH2)11BIPY-MCl2 (where M = Co or Cu) with a eutectic indium–gallium alloy top contact (EGaIn, 75.5% Ga 24.5% In). Here, AuTS-S(CH2)11BIPY is a self-assembled monolayer (SAM) of an alkanethiolate with 4-methyl-2,2′-bipyridine (BIPY) head groups, on template-stripped gold (AuTS). When the SAM is exposed to cobalt(II) chloride, SAMs of the form AuTS-S(CH2)11BIPY-CoCl2 rectify current with a rectification ratio of r+ = 82.0 at ±1.0 V. The rectification, however, disappears (r+ = 1.0) when the SAM is exposed to copper(II) chloride instead of cobalt. We draw the following conclusions from our experimental results: (i) AuTS-S(CH2)11BIPY-CoCl2 junctions rectify current because only at positive bias (+1.0 V) is there an accessible molecular orbital (the LUMO) on the BIPY-CoCl2 moiety, while at negative bias (−1.0 V), neither the energy level of the HOMO or the LUMO lies between the Fermi levels of the electrodes. (ii) AuTS-S(CH2)11BIPY-CuCl2 junctions do not rectify current because there is an accessible molecular orbital on the BIPY-CuCl2 moiety at both negative and positive bias (the HOMO is accessible at negative bias, and the LUMO is accessible at positive bias). The difference in accessibility of the HOMO levels at −1.0 V causes charge transfer—at negative bias—to take place via Fowler–Nordheim tunneling in BIPY-CoCl2 junctions, and via direct tunneling in BIPY-CuCl2 junctions. This difference in tunneling mechanism at negative bias is the origin of the difference in rectification ratio between BIPY-CoCl2 and BIPY-CuCl2 junctions. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email