skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Emissions of Aerospace Fuels F-24 and Jet-A in a Jet Engine and Correlation with Combustion Characteristics from a Constant Volume Combustion Chamber
Title: Emissions of Aerospace Fuels F-24 and Jet-A in a Jet Engine and Correlation with Combustion Characteristics from a Constant Volume Combustion Chamber
An investigation into emissions differences and their correlations with differing combustion characteristics between F24 and Jet-A was conducted. Raw emissions data was taken from a single stage jet engine by a FTIR gas analyzer. Measurements of H2O, CO2, CO, NOx, and total hydrocarbon emissions (THC) were taken at 60K, 65K, and 70K RPM. At 70K RPM Jet-A and F-24 the emissions were similar at approx.: 4% H2O, 3% CO2, 970 PPM CO, 28 PPM NOx. Jet-A THC emissions were approx.: 1200 PPM THC, F24 THC emissions were lower by over 60%. The significantly lower amount of THC emissions for F24 suggests more complete combustion compared to Jet-A.  more » « less
Award ID(s):
1950207
PAR ID:
10527293
Author(s) / Creator(s):
; ; ; ; ;
Corporate Creator(s):
;
Editor(s):
SAE, Transactions
Publisher / Repository:
SAE Transactions
Date Published:
Edition / Version:
2
Volume:
3
Issue:
4
ISSN:
0148-7191
Subject(s) / Keyword(s):
Jet A, F24, Emissions,
Format(s):
Medium: X Size: 1.1 Other: pdf
Size(s):
1.1
Location:
Greenville, South Carolina, United States
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, Proc. ASME. ICEF2022, ASME 2022 ICE Forward Conference,)
    ASME (Ed.)
    Research was conducted to determine combustion characteristics such as: ignition delay (ID), combustion delay (CD), combustion phasing (CA 50), combustion duration, derived cetane number (DCN) and ringing intensity (RI) of F24, for its compatibility in Common Rail Direct Injection (CRDI) compression ignition (CI) engine. The first part of this study is investigating the performance of Jet-A, F24, and ultra-low sulfur diesel #2 (ULSD) using a constant volume combustion chamber (CVCC) followed by experiments in a fired CRDI research engine. Investigations of the spray atomization and droplet size distribution of the neat fuels were conducted with a Malvern Mie scattering He-Ne laser. It was found that the average Sauter Mean Diameter (SMD) for Jet-A and F24 are similar, with both fuels SMD droplet range between 25–29 micrometers. Meanwhile, ULSD was found to have a larger SMD particle size in the range of 34–40 micrometers. It was observed during the study, utilizing the CVCC, that the ID and CD for neat ULSD and Jet-A are nearly identical while the combustion of F24 is delayed. F24 was found to have longer durations of both ID and CD by approx. 0.5 ms. This results in a lower DCN for the fuel of 43.5, whereas ULSD and Jet-A have DCNs of 45 and 47 respectively. The peak AHRR for ULSD and Jet-A are nearly identical, whereas F24 has a peak magnitude of approx. 20% lower than ULSD and Jet-A. It was found that both aviation fuels had significantly fewer ringing events occurring after peak high temperature heat release (HTHR), a trend also observed in the CRDI research engine. Neat F24, Jet-A and ULSD were researched in the experimental engine at the same thermodynamic parameters: 5 bar indicated mean effective pressure (IMEP), 50°C (supercharged and EGR) inlet air temperature, 1500 RPM, start of injection (SOI) 16°BTDC, and 800 bar of fuel rail injection pressure as the baseline parameters in order to observe their ignition behavior, low temperature heat release, combustion phasing, and combustion duration. It was found that the ignition delay of F24 and Jet-A was greater than ULSD, approx. 5% for both aviation fuels. This ignition delay also affected the combustion phasing, or CA 50, of the aviation fuels. The CA 50 of the aviation fuels was delayed by approx. 2% compared to ULSD. Jet-A had a nearly identical combustion duration compared to ULSD, however F24 had an extended combustion duration which was approx. 3% longer than that of ULSD and Jet-A. It was discovered with the accumulations of these delays in ID, CD, CA50, that the RI of the aviation fuels were reduced. F24 was discovered to have more delays, and the RI correlates with these results having a 70% reduction in RI compared to ULSD. 
    more » « less
  2. ; ; ; (, SAE Technical Paper Series)
    Since its implementation, exhaust gas recirculation has proven to be a reliable technique to control NOx emissions by lowering combustion temperature. Dilution with exhaust gas recirculation, whether in internal combustion engines or sequential-staged gas turbine combustors, affects flame reactivity and stability, which are related to the heat release rate and engine power. Another way to control emissions is to use hydrogen as a carbon-free alternative fuel, which is considered a milestone in the energy-decarbonization journey. However, the high reactivity of hydrogen is one of its hurdles and understanding this effect on laminar burning velocity is important. Flame propagation and burning velocity control the mixture reactivity and exothermicity and are related to abnormal combustion phenomena, such as flashback and knock. Therefore, understanding the effect of exhaust gas addition on the laminar burning velocity of hydrogen/air mixtures is imperative for engine design. In this work, a constant volume combustion chamber was used to observe the laminar burning velocity of stoichiometric hydrogen/air mixtures diluted with combustion products at 1 bar and 423K. Actual combustion products (35 % H2O + 65 % N2, by mole) were used for dilution at rates of 0-50%. The burned gas Markstein length was calculated for all mixtures. Experimental results of the laminar burning velocities for all mixtures were compared with kinetic modeling results. These measurements showed the monotonic reduction of reactivity and the laminar burning velocity with dilution. The reduced burning rates at higher dilution were reflected on the pressure gradient inside the vessel. Markstein length values decreased with dilution, meaning that flame instabilities increased with dilution. 
    more » « less
  3. ; ; ; ; ; (, SAE Technical Paper Series)
    The Coal-To-Liquid (CTL) synthetic aviation fuel, Iso-Paraffinic Kerosene (IPK), was studied for ignition delay, combustion delay, pressure trace, pressure rise rate, apparent heat release rate in an experimental single cylinder indirect injection (IDI) compression ignition engine and a constant volume combustion chamber (CVCC). Autoignition characteristics for neat IPK, neat Ultra-Low Sulfur Diesel (ULSD), and a blend of 50%IPK and 50% ULSD were determined in the CVCC and the effects of the autoignition quality of each fuel were determined also in an IDI engine. ULSD was found to have a Derived Cetane Number (DCN) of 47 for the batch used in this experimentation. IPK was found to have a DCN of 25.9 indicating that is has a lower affinity for autoignition, and the blend fell between the two at 37.5. Additionally, it was found that the ignition delay for IPK in the CVCC was 5.3 ms and ULSD was 3.56 ms. This increase in ignition delay allowed the accumulation of fuel in the combustion chamber when running with IPK that resulted in detonation of the premixed air and fuel found to cause high levels of Ringing Intensity (RI) when running neat IPK indicated by the 60% increase in Peak Pressure Rise Rate (PPRR) when compared to ULSD at the same load. An emissions analysis was conducted at 7 bar Indicated Mean Effective Pressure (IMEP) for ULSD and the blend of 50% ULSD and 50% IPK. With the addition of 50% IPK by mass, there was found to be a reduction in the NOx, CO2, with a slight increase in the CO in g/kWh. 
    more » « less
  4. ; ; (, Clean Technologies)
    Glycerol, a byproduct of biodiesel, has moderate energy but high viscosity, making clean combustion challenging. Quickly evaporating fine fuel sprays mix well with air and burn cleanly and efficiently. Unlike conventional air-blast atomizers discharging a jet core/film, a newly developed swirl burst (SB) injector generates fine sprays at the injector’s immediate exit, even for high-viscosity fuels, without preheating, using a unique two-phase atomization mechanism. It thus resulted in ultra-clean combustion for glycerol/methanol (G/M) blends, with complete combustion for G/M of 50/50 ratios by heat release rate (HRR). Lower combustion efficiencies were observed for G/M 60/40 and 70/30, representing crude glycerol. Hence, this study investigates the effect of premixed methane amount from 0–3 kW, and the effect of atomizing gas to liquid mass ratio (ALR) on the dual-fuel combustion efficiency of G/M 60/40-methane in a 7-kW lab-scale swirl-stabilized gas turbine combustor to facilitate crude glycerol use. Results show that more methane and increased ALR cause varying flame lift-off height, length, and gas product temperature. Regardless, mainly lean-premixed combustion, near-zero CO and NOx emissions (≤2 ppm), and ~100% combustion efficiency are enabled for all the cases by SB atomization with the assistance of a small amount of methane. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Science)
    The requirement for C2H2concentrations below 2 parts per million (ppm) in gas streams for C2H4polymerization necessitates its semihydrogenation to C2H4. We demonstrate selective chemical looping combustion of C2H2in C2H4-rich streams by Bi2O3as an alternative catalytic pathway to reduce C2H2concentration below 2 ppm. Bi2O3combusts C2H2with a first-order rate constant that is 3000 times greater than the rate constant for C2H4combustion. In successive redox cycles, the lattice O of Bi2O3can be fully replenished without discernible changes in local Bi coordination or C2H2combustion selectivity. Heterolytic activation of C–H bonds across Bi–O sites and the higher acidity of C2H2results in lower barriers for C2H2activation than C2H4, enabling selective catalytic hydrocarbon combustion leveraging differences in molecular deprotonation energies. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email