An official website of the United States government
Measurements of volcano deformation are increasingly routine, but constraining complex magma reservoir geometries via inversions of surface deformation measurements remains challenging. This is partly due to deformation modeling being limited to one of two approaches: computationally efficient semi-analytical elastic solutions for simple magma reservoir geometries (point sources, spheroids, and cracks) and computationally expensive numerical solutions for complex 3D geometries. Here, we introduce a pair of Graph Neural Network (GNN) based elasto-static emulators capable of making fast and reasonably accurate predictions (error upper bound: 15 %) of surface deformation associated with 3D reservoir geometries: a spheroid emulator and a general shape emulator, the latter parameterized with spherical harmonics. The emulators are trained on, and benchmarked against, boundary element (BEM) simulations, providing up to three orders of magnitude speed up compared to BEM methods. Once trained, the emulators can generalize to new reservoir geometries statistically similar to those in the training data set, thus avoiding the need for re-training, a common limitation for existing neural network emulators. We demonstrate the utility of the emulators via Bayesian Markov Chain Monte Carlo inversions of synthetic surface deformation data, showcasing scenarios in which the emulators can, and can not, resolve complex magma reservoir geometries from surface deformation. Our work demonstrates that GNN based emulators have the potential to significantly reduce the computational cost of inverse analyses related to volcano deformation, thereby bringing new insights into the complex geometries of magmatic systems.
more »
« less
This content will become publicly available on September 1, 2025
Computationally Efficient Emulation of Spheroidal Elastic Deformation Sources Using Machine Learning Models: A Gaussian‐Process‐Based Approach
Elastic continuum mechanical models are widely used to compute deformations due to pressure changes in buried cavities, such as magma reservoirs. In general, analytical models are fast but can be inaccurate as they do not correctly satisfy boundary conditions for many geometries, while numerical models are slow and may require specialized expertise and software. To overcome these limitations, we trained supervised machine learning emulators (model surrogates) based on parallel partial Gaussian processes which predict the output of a finite element numerical model with high fidelity but >1,000× greater computational efficiency. The emulators are based on generalized nondimensional forms of governing equations for finite non‐dipping spheroidal cavities in elastic halfspaces. Either cavity volume change or uniform pressure change boundary conditions can be specified, and the models predict both surface displacements and cavity (pore) compressibility. Because of their computational efficiency, using the emulators as numerical model surrogates can greatly accelerate data inversion algorithms such as those employing Bayesian Markov chain Monte Carlo sampling. The emulators also permit a comprehensive evaluation of how displacements and cavity compressibility vary with geometry and material properties, revealing the limitations of analytical models. Our open‐source emulator code can be utilized without finite element software, is suitable for a wide range of cavity geometries and depths, includes an estimate of uncertainties associated with emulation, and can be used to train new emulators for different source geometries.
more »
« less
- Award ID(s):
- 2053423
- PAR ID:
- 10528415
- Publisher / Repository:
- Wiley
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Machine Learning and Computation
- Volume:
- 1
- Issue:
- 3
- ISSN:
- 2993-5210
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Tedesco, Marco; Lai, Ching_Yao; Brinkerhoff, Douglas; Stearns, Leigh (Ed.)Emulators of ice flow models have shown promise for speeding up simulations of glaciers and ice sheets. Existing ice flow emulators have relied primarily on convolutional neural networks (CNN’s), which assume that model inputs and outputs are discretized on a uniform computational grid. However, many existing finite element-based ice sheet models such as the Ice-Sheet and Sea-level System model (ISSM) benefit from their ability to use unstructured computational meshes. Unstructured meshes allow for greater flexibility and computational efficiency in many modeling scenarios. In this work, we present an emulator of a higher order, finite element ice flow model based on a graph neural network (GNN) architecture. In this architecture, an unstructured finite element mesh is represented as a graph, with inputs and outputs of the ice flow model represented as variables on graph nodes and edges. An advantage of this approach is that the ice flow emulator can interface directly with a standard finite element –based ice sheet model by mapping between the finite element mesh and a graph suitable for the GNN emulator. We test the ability of the GNN to predict velocity fields on complex mountain glacier geometries and show how the emulated velocity can be used to solve for mass continuity using a standard finite element approach.more » « less
-
Tian, Li (Ed.)The accuracy of transmission tower-line system simulation is highly impacted by the transmission line model and its coupling with the tower. Owing to the high geometry nonlinearity of the transmission line and the complexity of the wind loading, such analysis is often conducted in the commercial software. In most commercial software packages, nonlinear truss element is used for cable modeling, whereas the initial strain condition of the nonlinear truss under gravity loading is not directly available. Elastic catenary element establishes an analytical formulation for cable structure under distributed loading; however, the nonlinear iteration to reach convergence can be computational expensive. To derive an optimal transmission tower-line model solution with high fidelity and computational efficiency, an open-source three-dimensional model is developed. Nonlinear truss element and elastic catenary element are considered in the model development. The results of the study imply that both elements are suitable for the transmission line model; nevertheless, the initial strain in nonlinear truss element largely impacts the model accuracy and should be calibrated from the elastic catenary model. To cross-validate the developed models on the coupled transmission tower and line, a one-span eight-line system is modeled with different elements and compared with several state-of-the-art commercial packages. The results indicate that the displacement time-history root-mean-square error (RMSE) of the open-source transmission tower-line model is less than 1 % and with a 66 % computational time reduction compared with the ANSYS model. The application of the open-source package transmission tower-line model on extreme wind speed considering the aerodynamic damping is further implemented.more » « less
-
Abstract This article presents a comprehensive benchmark study for the newly updated and publicly available finite element code CitcomSVE for modeling dynamic deformation of a viscoelastic and incompressible planetary mantle in response to surface and tidal loading. A complete description of CitcomSVE’s finite element formulation including calculations of the sea‐level change, polar wander, apparent center of mass motion, and removal of mantle net rotation is presented. The 3‐D displacements and displacement rates and the gravitational potential anomalies are solved with CitcomSVE for three benchmark problems using different spatial and temporal resolutions: (a) surface loading of single harmonics, (b) degree‐2 tidal loading, and (c) the ICE‐6G GIA model. The solutions are compared with semi‐analytical solutions for error analyses. The benchmark calculations demonstrate the accuracy and efficiency of CitcomSVE. For example, for a typical ICE‐6G GIA calculation with a 122‐ky glaciation‐deglaciation history, time increment of 100 years, and ∼50 km (or ∼0.5°) surface horizontal resolution, it takes ∼4.5 hr on 96 CPU cores to complete with about 1% and 5% errors for displacements and displacement rates, respectively. Error analyses shows that CitcomSVE achieves a second order accuracy, but the errors are insensitive to temporal resolution. CitcomSVE achieves the parallel computational efficiency >75% for using up to 6,144 CPU cores on a parallel supercomputer. With its accuracy, computational efficiency and its open‐source public availability, CitcomSVE provides a powerful tool for modeling viscoelastic deformation of a planetary mantle with 3‐D mantle viscous and elastic structures in response to surface and tidal loading problems.more » « less
-
Abstract The determination of the temperature in and above the slab in subduction zones, using models where the top of the slab is precisely known, is important to test hypotheses regarding the causes of arc volcanism and intermediate-depth seismicity. While 2D and 3D models can predict the thermal structure with high precision for fixed slab geometries, a number of regions are characterized by relatively large geometrical changes over time. Examples include the flat slab segments in South America that evolved from more steeply dipping geometries to the present day flat slab geometry. We devise, implement, and test a numerical approach to model the thermal evolution of a subduction zone with prescribed changes in slab geometry over time. Our numerical model approximates the subduction zone geometry by employing time dependent deformation of a Bézier spline that is used as the slab interface in a finite element discretization of the Stokes and heat equations. We implement the numerical model using the FEniCS open source finite element suite and describe the means by which we compute approximations of the subduction zone velocity, temperature, and pressure fields. We compute and compare the 3D time evolving numerical model with its 2D analogy at cross-sections for slabs that evolve to the present-day structure of a flat segment of the subducting Nazca plate.more » « less
