A C–H bond activation strategy based on electrochemical activation of a metal hydride is introduced. Electrochemical oxidation of ( tBu4 PCP)IrH 4 ( tBu4 PCP is [1,3-( t Bu 2 PCH 2 )-C 6 H 3 ] − ) in the presence of pyridine derivatives generates cationic Ir hydride complexes of the type [( tBu4 PCP)IrH(L)] + (where L = pyridine, 2,6-lutidine, or 2-phenylpyridine). Facile deprotonation of [( tBu4 PCP)IrH(2,6-lutidine)] + with the phosphazene base tert -butylimino-tris(pyrrolidino)phosphorane, t BuP 1 (pyrr), results in selective C–H activation of 1,2-difluorobenzene (1,2-DFB) solvent to generate ( tBu4 PCP)Ir(H)(2,3-C 6 F 2 H 3 ). The overall electrochemical C–H activation reaction proceeds at room temperature without need for chemical activation by a sacrificial alkene hydrogen acceptor. This rare example of undirected electrochemical C–H activation holds promise for the development of future catalytic processes.
more »
« less
Metal-Ligand Tautomerism, Electron-Transfer, and C(sp3)-H Activation by a 4 Pyridinyl-Pincer Iridium Hydride Complex
The para-N-pyridyl-based PCP pincer ligand 3,5-bis(di-tert-butylphosphinomethyl)-2,6-dimethylpyridine (pN-tBuPCP-H) was synthesized and metalated to give the iridium complex (pN tBuPCP)IrHCl (2-H). In marked contrast with its phenyl-based congeners (tBuPCP)IrHCl and derivatives, 2-H is highly air sensitive and reacts with oxidants such as ferrocenium, trityl cation, and benzoquinone. These oxidations ultimately lead to intramolecular activation of a phosphino-t-butyl C(sp3)-H bond and cyclometalation. Considering the greater electronegativity of N than C, 2-H is expected to be less easily oxidized than simple PCP derivatives; DFT calculations of direct one-electron oxidations are in good agreement with this expectation. However, 2-H is calculated to undergo metal-ligand-proton tautomerism (MLPT) to give an N-protonated complex that can be described with resonance forms representing a zwitterionic complex (negative charge on Ir) and a p-N-pyridylidene (remote NHC) Ir(I) complex. One-electron oxidation of this tautomer is calculated to be dramatically more favorable than direct oxidation of 2-H (G° = 31.3 kcal/mol). The resulting Ir(II) oxidation product is easily deprotonated to give metalloradical 2• which is observed by NMR spectroscopy. 2• can be further oxidized to give cationic Ir(III) complex, 2+, which can oxidatively add a phosphino-t butyl C-H bond, and undergo deprotonation to give the observed cyclometalated product. DFT calculations indicate that less sterically hindered complexes would preferentially undergo intermolecular addition of C(sp3)-H bonds, for example, of n alkanes. The resulting iridium alkyl complexes could undergo facile -H elimination to afford olefin, thereby completing a catalytic cycle for alkane dehydrogenation that is driven by one-electron oxidation and deprotonation, enabled by MLPT.
more » « less- Award ID(s):
- 2117792
- PAR ID:
- 10529803
- Publisher / Repository:
- ChemRxiv
- Date Published:
- Format(s):
- Medium: X
- Institution:
- Rutgers University
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Iridium dibromide complexes of the phenyldiimine ligand 2,6-bis(1-((2,6-dimethylphenyl)imino)ethyl)phenyl, trans-(XyPhDI)IrBr2L, have been synthesized, and relative Ir-L BDFEs have been experimentally determined for a wide range of corresponding adducts of ligands L. An estimate of the absolute enthalpy of Ir-L binding has been obtained from dynamic NMR measurements. The results of DFT calculations are in very good agreement with the relative and absolute experimental values. Computational studies were extended to the formation of adducts of (XyPhDI)IrH2 and (XyPhDI)Ir(I), as well as other (pincer)Ir(I) fragments, (Phebox)Ir(I) and (PCP)Ir(I), to enable a comparison of electronic and steric effects with these archetypal pincer ligands. Attempts to reduce (XyPhDI)IrBr2(MeCN) to a hydride or an Ir(I) complex yielded a dinuclear CN-bridged complex with a methyl ligand on the cyanide-C-bound Ir center (characterized by scXRD), indicating that C-CN bond cleavage took place at that Ir center. DFT calculations indicate that the C-CN bond cleavage occurs at one Ir center with strong assistance by coordination of the CN nitrogen to the other Ir center.
-
The dioxomolybdenum( vi ) complex MoO 2 Cl 2 (dmf) 2 reacts with Pb(DOPO Q ) 2 (DOPO = 2,4,6,8-tetra- tert -butyl-1,9-dioxophenoxazinate) to give MoO 2 (DOPO Q ) 2 , which has an eight-coordinate structure with normal molybdenum-oxo bond distances and angles but elongated distances to the dioxophenoxazine ligand. The dioxo complex is deoxygenated by phosphines to produce octahedral Mo(DOPO Cat ) 2 , in which reduction has taken place at the ancillary ligands. This compound in turn reacts with trimethylamine- N -oxide to regenerate MoO 2 (DOPO Q ) 2 , allowing a catalytic cycle for phosphine oxidation. This represents an example of four-electron nonclassical oxygen atom transfer in which both the oxidized and reduced forms of the metal complexes can be observed.more » « less
-
The synthesis and characterization of an iridium polyhydride complex ( Ir-H4 ) supported by an electron-rich PCP framework is described. This complex readily loses molecular hydrogen allowing for rapid room temperature hydrogen isotope exchange (HIE) at the hydridic positions and the α-C–H site of the ligand with deuterated solvents such as benzene-d 6 , toluene-d 8 and THF-d 8 . The removal of 1–2 equivalents of molecular H 2 forms unsaturated iridium carbene trihydride ( Ir-H3 ) or monohydride ( Ir-H ) compounds that are able to create further unsaturation by reversibly transferring a hydride to the ligand carbene carbon. These species are highly active hydrogen isotope exchange (HIE) catalysts using C 6 D 6 or D 2 O as deuterium sources for the deuteration of a variety of substrates. By modifying conditions to influence the Ir-Hn speciation, deuteration levels can range from near exhaustive to selective only for sterically accessible sites. Preparative level deuterations of select substrates were performed allowing for procurement of >95% deuterated compounds in excellent isolated yields; the catalyst can be regenerated by treatment of residues with H 2 and is still active for further reactions.more » « less
-
Pyridine and quinoline undergo selective C–H activation in the 2-position with Rh and Ir complexes of a boryl/bis(phosphine) PBP pincer ligand, resulting in a 2-pyridyl bridging the transition metal and the boron center. Examination of this reactivity with Rh and Ir complexes carrying different non-pincer ligands on the transition metal led to the realization of the possible isomerism derived from the 2-pyridyl fragment connecting either via B–N/C–M bonds or via B–C/N–M bonds. This M–C/M–N isomerism was systematically examined for four structural types. Each of these types has a defined set of ligands on Rh/Ir besides 2-pyridyl and PBP. A pair of M–C/M–N isomers for each type was computationally examined for Rh and for Ir, totaling 16 compounds. Several of these compounds were isolated or observed in solution by experimental methods, in addition to a few 2-quinolyl variants. The DFT predictions concerning the thermodynamic preference within each M–C/M–N isomeric match the experimental findings very well. In two cases where DFT predicts <2 kcal mol −1 difference in free energy, both isomers were experimentally observed in solution. Analysis of the structural data, of the relevant Wiberg bond indices, and of the ETS-NOCV partitioning of the interaction of the 2-pyridyl fragment with the rest of the molecule points to the strength of the M–C(pyridyl) bond as the dominant parameter determining the relative M–C/M–N isomer favorability. This M–C bond is always stronger for the analogous Ir vs. Rh compounds, but the nature of the ligand trans to it has a significant influence, as well. DFT calculations were used to evaluate the mechanism of isomerization for one of the molecule types.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Posted Content:
- https://doi.org/10.26434/chemrxiv-2023-8sbll-v2
