An official website of the United States government
Stress fields imparted with an ultrafast laser can correct low spatial frequency surface figure error of mirrors through ultrafast laser stress figuring (ULSF): the formation of nanograting structures within the bulk substrate generates localized stress, creating bending moments that equilibrize via wafer deformation. For ULSF to be used as an optical figuring process, the ultrafast laser generated stress must be effectively permanent or risk unwanted figure drift. Two isochronal annealing experiments were performed to measure ultrafast laser-generated stress stability in fused silica and Corning ultra-low expansion (ULE) wafers. The first experiment tracked changes to induced astigmatism up to 1000 °C on 25.4 mm-diameter wafers. Only small changes were measured after each thermal cycle up to 500 °C for both materials, but significant changes were observed at higher temperatures. The second experiment tracked stress changes in fused silica and ULE up to 500 °C but with 4 to 16× higher signal-to-noise ratio. Change in trefoil on 100 mm-diameter wafers was measured, and the induced stress in fused silica and ULE was found to be stable after thermal cycling up to 300 °C and 200 °C, respectively, with larger changes at higher temperatures.
more »
« less
Ultrafast laser stress figuring for accurate deformation of thin mirrors
Fabricating freeform mirrors relies on accurate optical figuring processes capable of arbitrarily modifying low-spatial frequency height without creating higher-spatial frequency errors. We present a scalable process to accurately figure thin mirrors using stress generated by a focused ultrafast laser. We applied ultrafast laser stress figuring (ULSF) to four thin fused silica mirrors to correct them to 10-20 nm RMS over 28 Zernike terms, in 2-3 iterations, without significantly affecting higher-frequency errors. We measured the mirrors over a month and found that dielectric-coated mirrors were stable but stability of aluminum-coated mirrors was inconclusive. The accuracy and throughput for ULSF is on par with existing deterministic figuring processes, yet ULSF doesn’t significantly affect mid-spatial frequency errors, can be applied after mirror coating, and can scale to higher throughput using mature laser processing technologies. ULSF offers new potential to rapidly and accurately shape freeform mirrors.
more »
« less
- Award ID(s):
- 2121713
- PAR ID:
- 10531179
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optics Express
- Volume:
- 30
- Issue:
- 11
- ISSN:
- 1094-4087; OPEXFF
- Format(s):
- Medium: X Size: Article No. 17767
- Size(s):
- Article No. 17767
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We demonstrate simultaneous figuring and surface finishing of glass using a femtosecond laser. For the first time, to the best of our knowledge, we have achieved deterministic material removal with nanometer precision and maintained sub-nanometer surface roughness without inducing any mid-spatial-frequency errors to the initial surface. A dynamic pulse propagation model is established to predict the interaction process, including plasma generation and surface temperature. The interactive modeling and the experiments enable the selection of a set of laser parameters to achieve controllable optical figuring and finishing. This demonstration shows the potential for using femtosecond lasers for advanced freeform optic forming, finishing, and reduction of detrimental mid-spatial-frequency errors, and laser-ablation-based patterning used for fabrication of integrated photonics and lasers.more » « less
-
We demonstrate nano-structuring and the reduction of mid-spatial-frequency errors using femtosecond laser figuring and finishing. For the first time, to the best of our knowledge, we have corrected mid-spatial-frequency errors from 17 nm to one nanometer in magnitude. We established a method for creating and predicting periodic nanostructures. This demonstration opens the path of using femtosecond lasers to correct surface errors that inherently result from sub-aperture manufacturing techniques.more » « less
-
Frequency domain nonlinear spectroscopies are a useful probe of linear and non-linear transitions in a variety of biological, chemical, and materials systems. They require scanning of optical parametric amplifiers (OPAs). Each OPA contains multiple motors that move to prerecorded positions to optimize output at each desired color. OPA optimization and color accuracy are crucial for frequency domain experiments, where OPA color is scanned. Such performance is highly sensitive to environmental fluctuations, so motor positions must be regularly optimized and tuned. Despite the widespread availability of motorized OPAs, this frequent maintenance can make frequency domain spectroscopy a cumbersome and time-consuming process. We have found that fully automated approaches to tuning are invaluable when scanning OPAs. Here, we report four algorithms that accurately and robustly tune a variety of ultrafast laser systems—picosecond and femtosecond, homebuilt and commercial OPAs. Using case studies from previously published work, we illustrate how these four algorithms can be combined to tune all motors of an ultrafast laser system. These algorithms are available through open-source software and can be applied to existing instruments, significantly lowering the threshold for executing frequency domain spectroscopy.more » « less
-
The generation of shaped laser beams, or structured light, is of interest in a wide range of fields, from microscopy to fundamental physics. There are several ways to make shaped beams, most commonly using spatial light modulators comprised of pixels of liquid crystals. These methods have limitations on the wavelength, pulse duration, and average power that can be used. Here we present a method to generate shaped light that can be used at any wavelength from the UV to IR, on ultrafast pulses, and a large range of optical powers. By exploiting the frequency difference between higher-order modes, a result of the Gouy phase, and cavity mode matching, we can selectively couple into a variety of pure and composite higher-order modes. Optical cavities are used as a spatial filter and then combined with sum-frequency generation in a nonlinear crystal as the output coupler to the cavity to create ultrafast, frequency comb structured light.more » « less
