More Like this

1. Collimated γ-ray emission enabled by efficient direct laser acceleration

   https://doi.org/10.1088/1367-2630/adb3c1  

   Tangtartharakul, Kavin; Fauvel, Gaetan; Meir, Talia; Condamine, Florian_Philippe; Weber, Stefan; Pomerantz, Ishay; Manuel, Mario; Arefiev, Alexey (February 2025, New Journal of Physics)

   Abstract We investigate the mechanisms responsible for single-lobed versus double-lobed angular distributions of emitted γ-rays in laser-irradiated plasmas, focusing on how direct laser acceleration (DLA) shapes the emission profile. Using test-particle calculations, we show that the efficiency of DLA plays a central role. In the inefficient DLA regime, electrons rapidly gain and lose energy within a single laser cycle, resulting in a double-lobed emission profile heavily influenced by laser fields. In contrast, in the efficient DLA regime, electrons steadily accumulate energy over multiple laser cycles, achieving much higher energies and emitting orders of magnitude more energy. This emission is intensely collimated and results in single-lobed profiles dominated by quasi-static azimuthal magnetic fields in the plasma. Particle-in-cell simulations demonstrate that lower-density targets create favorable conditions for some electrons to enter the efficient DLA regime. These electrons can dominate the emission, transforming the overall profile from double-lobed to single-lobed, even though inefficient DLA electrons remain present. These findings provide valuable insights for optimizing laser-driven γ-ray sources for applications requiring high-intensity, well-collimated beams. 

   more » « less
2. Path to a single-stage, 100-GeV electron beam via a flying-focus-driven laser-plasma accelerator

   https://doi.org/10.1063/5.0274780  

   Shaw, J_L; Ambat, M_V; Miller, K_G; Boni, R.; LaBelle, I_A; Mori, W_B; Pigeon, J_J; Rigatti, A.; Settle, I_A; Mack, L_S; et al (August 2025, Physics of Plasmas)

   Dephasingless laser wakefield acceleration (DLWFA), a novel laser wakefield acceleration concept based on the recently demonstrated “flying focus” technology, offers a new paradigm in laser-plasma acceleration that could advance the progress toward a TeV linear accelerator using a single-stage system without guiding structures. The recently proposed NSF OPAL laser facility could be the transformative technology that enables this grand challenge in laser-plasma acceleration. We review the viable parameter space for DLWFA based on the scaling of its performance with laser and plasma parameters, and we compare that performance to traditional laser wakefield acceleration. These scalings indicate the necessity for ultrashort, high-energy laser architectures such as NSF OPAL to achieve groundbreaking electron energies using DLWFA. Initial results from MTW-OPAL, the platform for the 6-J DLWFA demonstration experiment, show a tight, round focal spot over a distance of 3.7 mm. New particle-in-cell simulations of that platform indicate that using hydrogen for DLWFA reduces the amount of laser light that is distorted due to refraction at ionization fronts. An experimental path, and the computational and technical design work along that path, from the current status of the field to a single-stage, 100-GeV electron beam via DLWFA on NSF OPAL is outlined. Progress along that path is presented. 

   more » « less
3. Two-color 3D printing for reduction in femtosecond laser printing power

   https://doi.org/10.1364/OE.525826  

   Akash, Anwarul_Islam; Johnson, Jason_E; Arentz, Fredrik_C; Xu, Xianfan (July 2024, Optics Express)

   Two-photon polymerization (TPP) has emerged as a favored advanced manufacturing tool for creating complex 3D structures in the sub-micron regime. However, the widescale implementation of this technique is limited partly due to the cost of a high-power femtosecond laser. In this work, a method is proposed to reduce the femtosecond laser 3D printing power by as much as 50% using a combination of two-photon absorption from an 800 nm femtosecond laser and single photon absorption from a 532 nm nanosecond laser. The underlying photochemical process is explained with modeling of the photopolymerization reaction. The results show that incorporating single-photon absorption from a visible wavelength laser efficiently reduces inhibitor concentration, resulting in a decreased requirement for femtosecond laser power. The radical to macroradical conversion is dominated by the reduction in oxygen concentration, while the reduction in photoinitiator concentration limits the threshold power reduction of the femtosecond laser. 

   more » « less
4. Fiber array to chip attach using laser fusion splicing for low loss

   https://doi.org/10.1364/OE.492752  

   Nauriyal, Juniyali; Song, Meiting; Zhang, Yi; Granados-Baez, Marissa; Cardenas, Jaime (June 2023, Optics Express)

   With the ever-increasing need for higher data rates, datacom and telecom industries are now migrating to silicon photonics to achieve higher data rates with reduced manufacturing costs. However, the optical packaging of integrated photonic devices with multiple I/O ports remains a slow and expensive process. We introduce an optical packaging technique to attach fiber arrays to a photonic chip in a single shot using CO₂laser fusion splicing. We show a minimum coupling loss of 1.1 dB, 1.5 dB, and 1.4 dB per-facet for 2, 4, and 8-fiber arrays (respectively) fused to the oxide mode converters using a single shot from the CO₂laser. 

   more » « less
5. Single-shot visualization of the optical Kerr effect, ionization, and rotational Raman effect during laser matter interactions via frequency-domain holography

   Dempsey, Dennis; Nagar, Garima; Agnes, Jack; Berger, Russell; Shim, Bonggu (June 2021, APS Division of Atomic, Molecular and Optical Physics Meeting 2021)

   We visualize the ultrafast dynamics caused by intense femtosecond laser pulses in both thin flexible glass as well as gaseous atoms and molecules using single-shot Frequency Domain Holography (FDH) [1-3]. FDH is a robust, single-shot, time-resolved visualization technique that employs chirped pulses. Femtosecond laser micromachining of glass materials relies critically on the Kerr effect and ionization, thus direct observation of their dynamics can help produce optical devices such as waveguides. For gases, single-shot visualization of laser-matter interactions will allow for a better understanding of nonlinear optical phenomena such as filamentation [4] and Raman-induced extreme spectral broadening [5]. Using FDH, we have previously observed the ionization dynamics of thin, flexible glass and measured its nonlinear index [3], and are currently investigating the ultrafast dynamics of gases under intense laser fields. [1] S. P. Le Blanc et al., Opt. Lett. 56, 764-766 (2000). [2] K. Y. Kim et al., APL, 88 4124-4126 (2002). [3] S. Huang et. al., OFC 1-3 (2014). [4] A. Couairon et al., Phys. Rep. 441, 47 (2007). [5] D. Dempsey et al. Opt. Lett. 45, 1252-1255 (2020). 

   more » « less