skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Dry Printing Fully Functional Eco-Friendly and Disposable Transient Papertronics
Abstract The demand for flexible printed electronics is growing fast, especially with the move toward the Internet of Things (IoT). These printed electrons are usually designed for short-term use, after which they are disposed of. The polymeric substrates used in printed electronics comprise the biggest portion of their non-biodegradable E-waste after their disposal. This paper demonstrates the feasibility of printing fully functional transient electronics on flexible, water-soluble, and biodegradable paper substrates using the dry printing approach. The in-situ generation and real-time sintering of silver nanoparticles at room temperature enables the fabrication of complex circuits on such water-soluble papers. A layout similar to an Arduino pro mini board is printed on both sides of a paper substrate with electrical interconnects. Various electrical components are then directly mounted to fabricate a complete, working paper Arduino circuit. Cyclic bending tests demonstrate the mechanical durability and reliability of printed paper circuits under repeated bending stress. The process uniquely achieves robust and complex printed electronics without thermal damage, and the water solubility tests successfully show rapid dissolution of the paper devices in water. Furthermore, the components detached during dissolution are collected and reused, demonstrating the recyclability of the process. Overall, this transformative manufacturing method establishes key technical capabilities to produce next-generation sustainable, green electronics and sensors using renewable materials.  more » « less
Award ID(s):
2134024
PAR ID:
10534299
Author(s) / Creator(s):
; ;
Publisher / Repository:
IOP Science
Date Published:
Journal Name:
Flexible and Printed Electronics
ISSN:
2058-8585
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; (, ACS Sustainable Chemistry & Engineering)
    Printed electronics are gaining significant interest due to their design flexibility, low fabrication cost, and rapid design-to-manufacturing turnaround. Conventional substrates for printed electronics are often based on nonbiodegradable polymers such as polyimide that pose high environmental challenges by creating massive e-waste and pollution. As the demand for printed electronics and sensors increases, the ability to print such devices on biodegradable substrates can provide a solution to such environmental problems. However, current printing technologies are based on liquids and inks that are incompatible with biodegradable substrates, such as paper. Here, we present a dry-printing process, namely, a dry additive nanomanufacturing (Dry-ANM) technique, for printing conductive silver lines and patterns on biodegradable papers for flexible hybrid papertronics. Pure and dry nanoparticles are generated by pulsed laser ablation of a silver target that is then transported through a nozzle and directed onto paper substrates, where they are deposited and laser-sintered in real time to form the desired pattern without damaging the paper. The effects of different printing parameters on the paper-burning threshold are investigated, and the electrical properties of the lines are characterized by using different line thicknesses and sintering laser power densities. In addition, the mechanical and electrical properties of the printed lines and patterns are evaluated by bending and twisting tests. Furthermore, the feasibility of printing silver on different paper types is demonstrated. This research can potentially lead to biodegradable and environmentally friendly printed electronics and sensors. 
    more » « less
  2. ; ; ; ; ; (, Advanced Materials Interfaces)
    Abstract The growing demand for flexible and wearable hybrid electronics has triggered the need for advanced manufacturing techniques with versatile printing capabilities. Complex ink formulations, use of surfactants/contaminants, limited source materials, and the need for high‐temperature heat treatments for sintering are major issues facing the current inkjet and aerosol printing methods. Here, the nanomanufacturing of flexible hybrid electronics (FHE) by dry printing silver and indium tin oxide on flexible substrates using a novel laser‐based additive nanomanufacturing process is reported. The electrical resistance of the printed lines is tailored during the print process by tuning the geometry and structure of the printed samples. Different FHE designs are fabricated and tested to check the performance of the devices. Mechanical reliability tests including cycling, bending, and stretching confirm the expected performance of the printed samples under different strain levels. This transformative liquid‐free process allows the on‐demand formation and in situ laser crystallization of nanoparticles for printing pure materials for future flexible and wearable electronics and sensors. 
    more » « less
  3. ; (, Advanced Materials Technologies)
    Abstract The generation of electronic waste (e‐waste) poses a significant environmental challenge, necessitating strategies to extend electronics’ lifespan and incorporate eco‐friendly materials to enable their rapid degradation after disposal. Foldable electronics utilizing eco‐friendly materials offer enhanced durability during operation and degradability at the end of their life cycle. However, ensuring robust physical adhesion between electrodes/circuits and substrates during the folding process remains a challenge, leading to interface delamination and electronic failure. In this study, electrohydrodynamic (EHD) printing is employed as a cost‐effective method to fabricate the eco‐friendly foldable electronics by printing PEDOT:PSS/graphene composite circuits onto polyvinyl alcohol (PVA) films. The morphology and electrical properties of the printed patterns using inks with varying graphene and PEDOT:PSS weight ratios under different printing conditions are investigated. The foldability of the printed electronics is demonstrated, showing minimal resistance variation and stable electronic response even after four folds (16 layers) and hundreds of folding and unfolding cycles. Additionally, the application of printed PEDOT:PSS/graphene circuit is presented as a resistive temperature sensor for monitoring body temperature and respiration behavior. Furthermore, the transient features and degradation of the PEDOT:PSS/graphene/PVA based foldable electronics are explored, highlighting the potential promise as transient electronics in reducing electronic waste. 
    more » « less
  4. ; ; ; ; (, Advanced Materials Technologies)
    Abstract The demand of cost‐effective fabrication of printed flexible transistors has dramatically increased in recent years due to the need for flexible interface devices for various application including e‐skins, wearables, and medical patches. In this study, electrohydrodynamic (EHD) printing processes are developed to fabricate all the components of polymer‐based organic thin film transistors (OTFTs), including source/drain and gate electrodes, semiconductor channel, and gate dielectrics, which streamline the fabrication procedure for flexible OTFTs. The flexible transistors with top‐gate‐bottom‐contact configuration are fabricated by integrating organic semiconductor (i.e., poly(3‐hexylthiophene‐2,5‐diyl) blended with small molecule 2,7‐dioctyl[1]benzothieno[3,2‐b][1]benzothiophene), conductive polymer (i.e., poly (3,4‐ethylenedioxythiophene) polystyrene sulfonate), and ion‐gel dielectric. These functional inks are carefully designed with orthogonal solvents to enable their compatible printing into multilayered flexible OTFTs. The EHD printing process of each functional component is experimentally characterized and optimized. The fully EHD‐printed OTFTs show good electrical performance with mobility of 2.86 × 10−1cm2V−1s−1and on/off ratio of 104, and great mechanical flexibility with small mobility change at bending radius of 6 mm and stable transistor response under hundreds of bending cycles. The demonstrated all printing‐based fabrication process provides a cost‐effective route toward flexible electronics with OTFTs. 
    more » « less
  5. ; ; ; ; (, PeerJ Materials Science)
    Three commercially-available conductive filaments were evaluated for 3D printing flexible circuits on paper. While all three filaments were printed successfully, the resulting conductive traces were found to have significantly different impedances when characterized by electrochemical impedance spectroscopy. Using a graphite-doped polylactic acid filament, the flexibility of paper-based conductive traces was evaluated, methods of integrating common electrical and electronic components with the conductive traces were demonstrated, and the resistive heating of the traces was characterized. The ability to 3D print conductive traces on paper using commercially available materials opens many opportunities for rapid prototyping of flexible electronics and for integrating electronic circuits with paper-based microfluidic devices. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email