skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Potassium carbonate impregnation and torrefaction of wood block for thermal properties improvement: Prediction of torrefaction performance using artificial neural network
Title: Potassium carbonate impregnation and torrefaction of wood block for thermal properties improvement: Prediction of torrefaction performance using artificial neural network
Catalytic torrefaction using potassium carbonate (K2CO3) impregnation is a pretreatment method demonstrated to catalyze wood powder’s thermal degradation for energy use. In this study, beech wood boards were impregnated with K2CO3, with the aim to scale up from the studies on wood powder found in the literature. The beech boards were impregnated with five different concentrations and torrefied at 300◦C for four durations (5–60 min). The impregnation procedure was successful with a linear increase of K content in wood from 0.103 wt% for raw to 0.207 wt% for the 0.012 M sample. The weight loss during torrefaction increased with the increasing potassium (K) content in wood, reaching a maximum increase of 27.17% between 0.012 M and washed (no K2CO3) after 30 min. For the longest duration, the extent of the catalytic action of K decreased, similar to what is observed in wood powder. After 60 min torrefaction, potassium increased the torrefaction severity index by up to 10% and the higher heating value (HHV) by up to 55%. Potassium efficiently increasedthe fixed carbon and decreased the volatile matter to values comparable to coal by catalyzing the devolatilization during torrefaction. The atomic H/C and O/C ratios shifted to similar ratios as coal. The energy yield (EY) was above 80% for the shorter durations but dropped drastically at 30 and 60 min torrefaction. The prediction of the solid yield (SY), energy yield (EY), and enhancement factor of the HHV (EF) through an artificial neural network was robust with a fit quality R2≥0.999. The proposed method for catalytic torrefaction on wood boards was efficient and could be used prior to grinding and transportation for bioenergy production. This process could decrease the production costs of biomass fuel to compete with fossil fuels.  more » « less
Award ID(s):
1952402
PAR ID:
10534692
Author(s) / Creator(s):
; ; ; ; ; ; ;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Applied energy
ISSN:
0306-2619
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; (, Green Chemistry)
    null (Ed.)
    Biomass conversion to alcohols using supercritical methanol depolymerization and hydrodeoxygenation (SCM-DHO) with CuMgAl mixed metal oxide is a promising process for biofuel production. We demonstrate how maple wood can be converted at high weight loadings and product concentrations in a batch and a semi-continuous reactor to a mixture of C 2 –C 10 linear and cyclic alcohols. Maple wood was solubilized semi-continuously in supercritical methanol and then converted to a mixture of C 2 –C 9 alcohols and aromatics over a packed bed of CuMgAlO x catalyst. Up to 95 wt% of maple wood can be solubilized in the methanol by using four temperature holds at 190, 230, 300, and 330 °C. Lignin was solubilized at 190 and 230 °C to a mixture of monomers, dimers, and trimers while hemicellulose and cellulose solubilized at 300 and 330 °C to a mixture of oligomeric sugars and liquefaction products. The hemicellulose, cellulose, and lignin were converted to C 2 –C 10 alcohol fuel precursors over a packed bed of CuMgAlO x catalyst with 70–80% carbon yield of the entire maple wood. The methanol reforming activity of the catalyst decreased by 25% over four beds of biomass, which corresponds to 5 turnovers for the catalyst, but was regenerable after calcination and reduction. In batch reactions, maple wood was converted at 10 wt% in methanol with 93% carbon yield to liquid products. The product concentration can be increased to 20 wt% by partially replacing the methanol with liquid products. The yield of alcohols in the semi-continuous reactor was approximately 30% lower than in batch reactions likely due to degradation of lignin and cellulose during solubilization. These results show that solubilization of whole biomass can be separated from catalytic conversion of the intermediates while still achieving a high yield of products. However, close contact of the catalyst and the biomass during solubilization is critical to achieve the highest yields and concentration of products. 
    more » « less
  2. ; ; ; (, Materials)
    Potassium is used extensively as a promoter with iron catalysts in Fisher–Tropsch synthesis, water–gas shift reactions, steam reforming, and alcohol synthesis. In this paper, the identification of potassium chemical states on the surface of iron catalysts is studied to improve our understanding of the catalytic system. Herein, potassium-doped iron oxide (α-Fe2O3) nanomaterials are synthesized under variable calcination temperatures (400–800 °C) using an incipient wetness impregnation method. The synthesis also varies the content of potassium nitrate deposited on superfine iron oxide with a diameter of 3 nm (Nanocat®) to reach atomic ratios of 100 Fe:x K (x = 0–5). The structure, composition, and properties of the synthesized materials are investigated by X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, Fourier-transform infrared, Raman spectroscopy, inductively coupled plasma-atomic emission spectroscopy, and X-ray photoelectron spectroscopy, as well as transmission electron microscopy, with energy-dispersive X-ray spectroscopy and selected area electron diffraction. The hematite phase of iron oxide retains its structure up to 700 °C without forming any new mixed phase. For compositions as high as 100 Fe:5 K, potassium nitrate remains stable up to 400 °C, but at 500 °C, it starts to decompose into nitrites and, at only 800 °C, it completely decomposes to potassium oxide (K2O) and a mixed phase, K2Fe22O34. The doping of potassium nitrate on the surface of α-Fe2O3 provides a new material with potential applications in Fisher–Tropsch catalysis, photocatalysis, and photoelectrochemical processes. 
    more » « less
  3. ; ; ; ; ; (, Energies)
    Tae Hyun Kim (Ed.)
    The environmentally sustainable production of biodiesel is important for providing both a renewable alternative transportation fuel as well as a fuel for power generation using diesel engines. This research evaluates the use of inexpensive catalysts derived from waste materials for converting triglycerides in seed oils into biodiesel composed of fatty acid methyl esters. The performance of CaO catalysts derived from the shells of oysters, mussels, lobsters, and chicken eggs was investigated. The shell-derived powders were calcined with and without the addition of zinc nitrate at 700–1000 °C for 4 h to yield CaO whereas the CaO-ZnO mixed catalyst were prepared by wet impregnation followed by calcination at 700 °C. The catalysts were characterized by XRF, XRD, TGA, SEM, FTIR and GC-MS. The CaO-ZnO catalysts showed slightly better conversion efficiency compared to CaO catalysts for the transesterification of canola oil. The mixed CaO-ZnO catalysts derived mainly from oyster shells showed the highest catalytic activity with >90% biodiesel yield at a 9:1 methanol-to-oil mole ratio within 10 min of ultrasonication. The reduction of toxicant emission from the generator is 43% and 60% for SO2, 11% and 26% for CO, were observed for the biodiesel blending levels of B20 and B40, respectively. 
    more » « less
  4. (, Journal of the Energy Institute)
    The combination of pyrolysis and CO2 gasification was studied to synergistically improve the syngas yield and biochar quality. The subsequent 60-min CO2 gasification at 800 C after pyrolysis increased the syngas yield from 23.4% to 40.7% while decreasing the yields of biochar and bio-oil from 27.3% to 17.1% and from 49.3% to 42.2%, respectively. The BET area of the biochar obtained by the subsequent 60-min CO2 gasification at 800 C was 384.5 m2 /g, compared to 6.8 m2 /g for the biochar obtained by the 60- min pyrolysis at 800 C, and 1.4 m2 /g for the raw biomass. The biochar obtained above 500 C was virtually amorphous. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Nature Communications)
    Abstract Direct implementation of metal-organic frameworks as the catalyst for CO 2 electroreduction has been challenging due to issues such as poor conductivity, stability, and limited > 2e − products. In this study, Au nanoneedles are impregnated into a cupric porphyrin-based metal-organic framework by exploiting ligand carboxylates as the Au 3+ -reducing agent, simultaneously cleaving the ligand-node linkage. Surprisingly, despite the lack of a coherent structure, the Au-inserted framework affords a superb ethylene selectivity up to 52.5% in Faradaic efficiency, ranking among the best for metal-organic frameworks reported in the literature. Through operando X-ray, infrared spectroscopies and density functional theory calculations, the enhanced ethylene selectivity is attributed to Au-activated nitrogen motifs in coordination with the Cu centers for C-C coupling at the metalloporphyrin sites. Furthermore, the Au-inserted catalyst demonstrates both improved structural and catalytic stability, ascribed to the altered charge conduction path that bypasses the incoherent framework. This study underlines the modulation of reticular metalloporphyrin structure by metal impregnation for steering the CO 2 reduction reaction pathway. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email