An official website of the United States government
Abstract Blood clotting is the body’s natural reaction in wound healing and is also the cause of many pathologies. Fibrin – the main protein in the clotting process provides clots’ mechanical strength by forming a scaffold of complex fibrin fibers. Fibrin fibers exhibit high extensibility and primarily elastic properties under static loading, which differ from in vivo dynamic forces. In many biological materials, the mechanical response changes under repeated loading/unloading (cyclic loading). Using lateral force microscopy, we show fibrin fibers possess viscoelastic behavior and experience irreversible damage under cyclic loading. Cross-linking results in a more rigid structure with permanent damage occurring mostly at larger strains, which is corroborated by computational modeling of fibrin extension using a hyperelastic model. Molecular spectroscopy analysis with broadband coherent anti-Stokes Raman scattering spectroscopy in addition to molecular dynamic simulations allow identification of the source of damage, the unfolding pattern, and inter and intramolecular changes in fibrin. The results show partial recovery of protein’s secondary and tertiary structures under load, providing deeper understanding of fibrin’s unique behavior in wound healing or pathologies like stroke and embolism.
more »
« less
Viscoelastic materials are most energy efficient when loaded and unloaded at equal rates
Biological springs can be used in nature for energy conservation and ultra-fast motion. The loading and unloading rates of elastic materials can play an important role in determining how the properties of these springs affect movements. We investigate the mechanical energy efficiency of biological springs (American bullfrog plantaris tendons and guinea fowl lateral gastrocnemius tendons) and synthetic elastomers. We measure these materials under symmetric rates (equal loading and unloading durations) and asymmetric rates (unequal loading and unloading durations) using novel dynamic mechanical analysis measurements. We find that mechanical efficiency is highest at symmetric rates and significantly decreases with a larger degree of asymmetry. A generalized one-dimensional Maxwell model with no fitting parameters captures the experimental results based on the independently characterized linear viscoelastic properties of the materials. The model further shows that a broader viscoelastic relaxation spectrum enhances the effect of rate-asymmetry on efficiency. Overall, our study provides valuable insights into the interplay between material properties and unloading dynamics in both biological and synthetic elastic systems.
more »
« less
- Award ID(s):
- 2019371
- PAR ID:
- 10535057
- Publisher / Repository:
- the Royal Society
- Date Published:
- Journal Name:
- Journal of The Royal Society Interface
- Volume:
- 21
- Issue:
- 210
- ISSN:
- 1742-5662
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Latch-mediated spring actuation (LaMSA) systems leverage the interplay of springs and latches to rapidly accelerate a load. In biological systems, elastic energy is often distributed across multiple structures, resulting in forces applied from multiple springs. Here, we specifically examine dual spring force couples in torque reversal systems. A dual spring force couple applies forces from recoiling springs at two locations to generate torque. Torque reversal systems transition from spring loading to spring actuation through a change in torque direction. We develop a mathematical model of a dual spring force couple in a torque reversal system, where one spring is attached to the pivot point of the rigid body. During spring loading, this spring compresses to store elastic energy; during spring actuation, it recoils, driving pivot translation and contributing to rotation. We experimentally validate the model using a physical model. We then vary geometric parameters and the energy partition between the two springs to examine how these factors shape system dynamics. We show how variations in geometry and energy partition influence the rotational, translational, and coupling terms in the mathematical model. Finally, we demonstrate that the energetics of these systems must be carefully accounted for to accurately capture how potential energy is transformed into kinetic energy. We hypothesize that dual spring force couples in torque reversal systems may be prevalent in biological organisms, and that insights from this work can guide the design of spring-actuated mechanisms in robotics.more » « less
-
The mechanical properties of the cell nucleus are increasingly recognized as critical in many biological processes. The deformability of the nucleus determines the ability of immune and cancer cells to migrate through tissues and across endothelial cell layers, and changes to the mechanical properties of the nucleus can serve as novel biomarkers in processes such as cancer progression and stem cell differentiation. However, current techniques to measure the viscoelastic nuclear mechanical properties are often time consuming, limited to probing one cell at a time, or require expensive, highly specialized equipment. Furthermore, many current assays do not measure time-dependent properties, which are characteristic of viscoelastic materials. Here, we present an easy-to-use microfluidic device that applies the well-established approach of micropipette aspiration, adapted to measure many cells in parallel. The device design allows rapid loading and purging of cells for measurements, and minimizes clogging by large particles or clusters of cells. Combined with a semi-automated image analysis pipeline, the microfluidic device approach enables significantly increased experimental throughput. We validated the experimental platform by comparing computational models of the fluid mechanics in the device with experimental measurements of fluid flow. In addition, we conducted experiments on cells lacking the nuclear envelope protein lamin A/C and wild-type controls, which have well-characterized nuclear mechanical properties. Fitting time-dependent nuclear deformation data to power law and different viscoelastic models revealed that loss of lamin A/C significantly altered the elastic and viscous properties of the nucleus, resulting in substantially increased nuclear deformability. Lastly, to demonstrate the versatility of the devices, we characterized the viscoelastic nuclear mechanical properties in a variety of cell lines and experimental model systems, including human skin fibroblasts from an individual with a mutation in the lamin gene associated with dilated cardiomyopathy, healthy control fibroblasts, induced pluripotent stem cells (iPSCs), and human tumor cells. Taken together, these experiments demonstrate the ability of the microfluidic device and automated image analysis platform to provide robust, high throughput measurements of nuclear mechanical properties, including time-dependent elastic and viscous behavior, in a broad range of applications.more » « less
-
Transition metal dichalcogenides (TMDCs) are potential materials for future optoelectronic devices. Grain boundaries (GBs) can significantly influence the optoelectronic properties of TMDC materials. Here, we have investigated the mechanical characteristics of tungsten diselenide (WSe 2 ) monolayers and failure process with symmetric tilt GBs using ReaxFF molecular dynamics simulations. In particular, the effects of topological defects, loading rates, and temperatures are investigated. We considered nine different grain boundary structures of monolayer WSe 2 , of which six are armchair (AC) tilt structures, and the remaining three are zigzag (ZZ) tilt structures. Our results indicate that both tensile strength and fracture strain of WSe 2 with symmetric tilt GBs decrease as the temperature increases. We revealed an interfacial phase transition for high-angle GBs reduces the elastic strain energy within the interface at finite temperatures. Furthermore, brittle cracking is the dominant failure mode in the WSe 2 monolayer with tilted GBs. WSe 2 GB structures showed more strain rate sensitivity at high temperatures than at low temperatures.more » « less
-
Reference point indentation (RPI) is a novel experimental technique designed to evaluate bone quality. This study utilizes two RPI instruments, BioDent and Osteoprobe, to investigate the mechanical responses of several 3D-printed polymers. We correlated the mechanical properties from a tensile test with the RPI parameters obtained from the BioDent and OsteoProbe. In addition, we tested the same polymers five years later (Age 5). The results show that for Age 0 polymers, the elastic modulus is highly correlated with average unloading slope (r = 0.87), first unloading slope (r = 0.85), bone material strength index (BMSi) (r = 0.85), average loading slope (r = 0.82), first indentation distance (r = 0.79), and total indentation distance (r = 0.76). The ultimate stress correlates significantly with first unloading slope (r = 0.85), average unloading slope (r = 0.83), BMSi (r = 0.81), first indentation distance (r = 0.73), average loading slope (r = 0.71), and total indentation distance (r = 0.70). The elongation has no significant correlation with the RPI parameters except with the average creep indentation distance (r = 0.60). For Age 5 polymers, correlations between mechanical properties and RPI parameters are low. This study illustrates the potential of RPI to assess the mechanical properties of polymers nondestructively with simple sample requirements. Furthermore, for the first time, 3D-printed polymers and aged polymers are investigated with RPI.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1098/rsif.2023.0527
