We present the design of a portable coronagraph, CATEcor (where CATE stands for Continental-America Telescope Eclipse), that incorporates a novel “shaded-truss” style of external occultation and serves as a proof-of-concept for that family of coronagraphs. The shaded-truss design style has the potential for broad application in various scientific settings. We conceived CATEcor itself as a simple instrument to observe the corona during the darker skies available during a partial solar eclipse, or for students or interested amateurs to detect the corona under ideal noneclipsed conditions. CATEcor is therefore optimized for simplicity and accessibility to the public. It is implemented using an existing dioptric telescope and an adapter rig that mounts in front of the objective lens, restricting the telescope aperture and providing external occultation. The adapter rig, including occulter, is fabricated using fusion deposition modeling (FDM; colloquially “3D printing”), greatly reducing cost. The structure is designed to be integrated with moderate care and may be replicated in a university or amateur setting. While CATEcor is a simple demonstration unit, the design concept, process, and trades are useful for other more sophisticated coronagraphs in the same general family, which might operate under normal daytime skies outside the annular-eclipse conditions used for CATEcor.
more »
« less
Observations of the Polarized Solar Corona During the Annular Eclipse of 14 October 2023
We present results of a dual eclipse expedition to observe the solar corona from two sites during the annular solar eclipse of 14 October 2023 using a novel coronagraph designed to be accessible for amateurs and students to build and deploy. The coronagraph (CATEcor) builds on the standardized eclipse observing equipment developed for the Citizen CATE 2024 experiment. The observing sites were selected for likelihood of clear observations, for historic relevance (near the Climax site in the Colorado Rocky Mountains), and for centrality to the annular eclipse path (atop Sandia Peak above Albuquerque, New Mexico). The novel portion of CATEcor is an external occulter assembly that slips over the front of a conventional dioptric telescope, forming ashaded-trussexternally occulted coronagraph. CATEcor is specifically designed to be easily constructed in a garage or “makerspace” environment. We successfully observed some bright features in the solar corona to an altitude of approximately 2.25 R⊙during the annular phases of the eclipse. Future improvements to the design, in progress now, will reduce both stray light and image artifacts; our objective is to develop a design that can be operated successfully by amateur astronomers at sufficient altitude even without the darkened skies of a partial or annular eclipse.
more »
« less
- PAR ID:
- 10537524
- Publisher / Repository:
- Springer Science+Business Media
- Date Published:
- Journal Name:
- Solar Physics
- Volume:
- 299
- Issue:
- 6
- ISSN:
- 0038-0938
- Page Range / eLocation ID:
- 79
- Subject(s) / Keyword(s):
- solar eclipse solar K corona solar instrumentation
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Low-frequency solar radio emission is sourced in the solar corona, with sub-100 MHz radio emission largely originating from the ∼105K plasma around 2 optical radii. However, the region of emission has yet to be constrained at 35–45 MHz due to both instrumentation limitations and the rarity of astronomical events, such as total solar eclipses, which allow for direct observational approaches. In this work, we present the results from a student-led project to commission a low-frequency radio telescope array situated in the path of totality of the 2024 total solar eclipse in an effort to probe the middle corona. The Deployable Low-Band Ionosphere and Transient Experiment (DLITE) is a low-frequency radio array comprised of four dipole antennas, optimized to observe at 35–45 MHz, and capable of resolving the brightest radio sources in the sky. We constructed a DLITE station in Observatory Park, a dark-sky park in Montville, Ohio. Results of observations during the total solar eclipse demonstrate that DLITE stations can be quickly deployed for observations and provide constraints on the radius of solar emission at our center observing frequency of 42 MHz. In this work, we outline the construction of DLITE Ohio and the solar observation results from the total solar eclipse that transversed North America in 2024 April.more » « less
-
Abstract Differential emission measure (DEM) inversion methods use the brightness of a set of emission lines to infer the line-of-sight (LOS) distribution of the electron temperature (Te) in the corona. DEM inversions have been traditionally performed with collisionally excited lines at wavelengths in the extreme ultraviolet and X-ray. However, such emission is difficult to observe beyond the inner corona (1.5R⊙), particularly in coronal holes. Given the importance of theTedistribution in the corona for exploring the viability of different heating processes, we introduce an analog of the DEM specifically for radiatively excited coronal emission lines, such as those observed during total solar eclipses (TSEs) and with coronagraphs. This radiative-DEM (R-DEM) inversion utilizes visible and infrared emission lines that are excited by photospheric radiation out to at least 3R⊙. Specifically, we use the Fex(637 nm), Fexi(789 nm), and Fexiv(530 nm) coronal emission lines observed during the 2019 July 2 TSE near solar minimum. We find that, despite a largeTespread in the inner corona, the distribution converges to an almost isothermal yet bimodal distribution beyond 1.4R⊙, withTeranging from 1.1 to 1.4 in coronal holes and from 1.4 to 1.65 MK in quiescent streamers. Application of the R-DEM inversion to the Predictive Science Inc. magnetohydrodynamic simulation for the 2019 eclipse validates the R-DEM method and yields a similar LOSTedistribution to the eclipse data.more » « less
-
Abstract An annular solar eclipse was visible on 14 October 2023 from 15:00–21:00 UT as its path traveled across North, Central, and South America. In this letter, we present the first multi‐frequency Super Dual Auroral Radar Network (SuperDARN) observations of the bottomside ionospheric response to a solar eclipse using a novel experimental mode designed for the October 2023 annular eclipse. We compare our results from the mid‐latitude Christmas Valley East radar with measurements of the vertical electron density profile from the nearby Boulder Digisonde, finding the changes in 1‐ and 2‐hop ground scatter skip distance are well correlated with the ‐layer density response, which lags the peak obscuration by 30 min. Changes in the line‐of‐sight Doppler shifts are better aligned with the time derivative of eclipse obscuration.more » « less
-
Abstract We present the spatially resolved absolute brightness of the Fex, Fexi, and Fexivvisible coronal emission lines from 1.08 to 3.4R⊙, observed during the 2019 July 2 total solar eclipse (TSE). The morphology of the corona was typical of solar minimum, with a dipole field dominance showcased by large polar coronal holes and a broad equatorial streamer belt. The Fexiline is found to be the brightest, followed by Fexand Fexiv(in diskB⊙units). All lines had brightness variations between streamers and coronal holes, where Fexivexhibited the largest variation. However, Fexremained surprisingly uniform with latitude. The Fe line brightnesses are used to infer the relative ionic abundances and line-of-sight-averaged electron temperature (Te) throughout the corona, yielding values from 1.25 to 1.4 MK in coronal holes and up to 1.65 MK in the core of streamers. The line brightnesses and inferredTevalues are then quantitatively compared to the Predictive Science Inc. magnetohydrodynamic model prediction for this TSE. The MHD model predicted the Fe lines rather well in general, while the forward-modeled line ratios slightly underestimated the observationally inferredTewithin 5%–10% averaged over the entire corona. Larger discrepancies in the polar coronal holes may point to insufficient heating and/or other limitations in the approach. These comparisons highlight the importance of TSE observations for constraining models of the corona and solar wind formation.more » « less
An official website of the United States government

