Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Fully 3D‐Printed Miniature Soft Hydraulic Actuators with Shape Memory Effect for Morphing and Manipulation
Abstract Miniature shape‐morphing soft actuators driven by external stimuli and fluidic pressure hold great promise in morphing matter and small‐scale soft robotics. However, it remains challenging to achieve both rich shape morphing and shape locking in a fast and controlled way due to the limitations of actuation reversibility and fabrication. Here, fully 3D‐printed, sub‐millimeter thin‐plate‐like miniature soft hydraulic actuators with shape memory effect (SME) for programable fast shape morphing and shape locking, are reported. It combines commercial high‐resolution multi‐material 3D printing of stiff shape memory polymers (SMPs) and soft elastomers and direct printing of microfluidic channels and 2D/3D channel networks embedded in elastomers in a single print run. Leveraging spatial patterning of hybrid compositions and expansion heterogeneity of microfluidic channel networks for versatile hydraulically actuated shape morphing, including circular, wavy, helical, saddle, and warping shapes with various curvatures, are demonstrated. The morphed shapes can be temporarily locked and recover to their original planar forms repeatedly by activating SME of the SMPs. Utilizing the fast shape morphing and locking in the miniature actuators, their potential applications in non‐invasive manipulation of small‐scale objects and fragile living organisms, multimodal entanglement grasping, and energy‐saving manipulators, are demonstrated.  more » « less
Award ID(s):
2329674 2126072
PAR ID:
10538680
Author(s) / Creator(s):
; ; ; ; ; ;
Publisher / Repository:
Wiley
Date Published:
Journal Name:
Advanced Materials
ISSN:
0935-9648
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Small)
    Abstract Elastomers generally possess low Young's modulus and high failure strain, which are widely used in soft robots and intelligent actuators. However, elastomers generally lack diverse functionalities, such as stimulated shape morphing, and a general strategy to implement these functionalities into elastomers is still challenging. Here, a microfluidic 3D droplet printing platform is developed to design composite elastomers architected with arrays of functional droplets. Functional droplets with controlled size, composition, position, and pattern are designed and implemented in the composite elastomers, imparting functional performances to the systems. The composited elastomers are sensitive to stimuli, such as solvent, temperature, and light, and are able to demonstrate multishape (bow‐ and S‐shaped), multimode (gradual and sudden), and multistep (one‐ and two‐step) deformations. Based on the unique properties of droplet‐embedded composite elastomers, a variety of stimuli‐responsive systems are developed, including designable numbers, biomimetic flowers, and soft robots, and a series of functional performances are achieved, presenting a facile platform to impart diverse functionalities into composite elastomers by microfluidic 3D droplet printing. 
    more » « less
  2. ; ; ; (, Advanced Intelligent Systems)
    Shape‐morphing devices, a crucial branch in soft robotics, hold significant application value in areas like human–machine interfaces, biomimetic robotics, and tools for biological systems. To achieve 3D programmable shape morphing (PSM), the deployment of array‐based actuators is essential. However, a critical knowledge gap in 3D PSM is controlling the complex systems formed by these soft actuator arrays to mimic the morphology of the target shapes. This study, for the first time, represents the configuration of shape‐morphing devices using point cloud data and employing deep learning to map these configurations to control inputs. Shape Morphing Net (SMNet), a method that realizes the regression from point cloud to high‐dimensional control input vectors, is proposed. It has been applied to 3D PSM devices with three different actuator mechanisms, demonstrating its universal applicability to inversely reproduce the target shapes. Further, applied to previous 2D PSM devices, SMNet significantly enhances control precision from 82.23% to 97.68%. In the demonstrations of morphology mimicking, 3D PSM devices successfully replicate arbitrary target shapes obtained either through 3D scanning of physical objects or via 3D modeling software. The results show that within the deformable range of 3D PSM devices, accurate reproduction of the desired shapes is achievable. 
    more » « less
  3. ; (, Advanced Functional Materials)
    Abstract Stimuli‐responsive soft materials (SRSMs) can change shape in response to external stimuli, such as heat or light, through non‐equilibrium kinetic processes like diffusion and viscoelastic relaxation. Steering the non‐equilibrium kinetic processes is crucial to enable programmable spatiotemporal shape morphing of SRSMs. However, achieving such behavior through simple control and facile fabrication remains a challenge. Herein, by regulating the non‐equilibrium kinetic processes in photothermally responsive shape memory polymer (SMP) strips, their programmable spatiotemporal shape‐morphing is demonstrated with a simple material system and constant external stimuli. Specifically, it is shown that how varying the angles of light incidence, light intensity, and material properties encode the programmable spatiotemporal behaviors. These experiments manifest that an SMP strip displays convexity inversion, flip‐forward motion, and rolling behavior in response to constant light illumination. Furthermore, it is shown that a twisted SMP strip exhibits different untwisted directions under different concentrated illumination areas. Finally, materials are patterned with different kinetic properties in an SMP strip, demonstrating the capability of SMPs to undergo more complex spatiotemporal shape‐morphing behaviors, such as twisted bending. This work achieves programmable spatiotemporal shape‐morphing behaviors of SMP by utilizing material intelligence, and provides essential design guidelines for morphing structures and soft robots. 
    more » « less
  4. ; ; ; ; ; ; (, Advanced Science)
    ABSTRACT Rapid prototyping of soft robotic devices is often constrained by manual fabrication or additive manufacturing methods that are limited in material choice or require extensive post‐processing. Fused Granulate Fabrication offers a scalable alternative by extruding thermoplastic pellets through a screw‐based extruder, enabling continuous, high‐throughput printing and access to a broad range of commercially available materials, from rigid plastics to silicone‐soft elastomers with Shore hardness as low as 6A. Reliable 3D printing of airtight pneumatic soft structures at volumetric flow rates up to 5 mm3/s is demonstrated by addressing inconsistent extrusion and stringing issues through a combination of hardware optimization and a materials‐centered printing strategy. Extrusion and oozing tests are used to construct material‐specific oozing performance profiles, establishing practical guidelines for material selection in FGF printing, and are linked to key rheological descriptors. The mechanical performance of thermoplastic styrenic block copolymer pellets is characterized, revealing Mullins‐effect‐induced softening, and fabricated pneumatic actuators exhibit durability exceeding 100 000 bending cycles. Demonstrations include a pneumatically actuated robotic hand, a multi‐chamber robotic fish, and a soft pressure cuff. FGF enables the digital fabrication of large‐scale, airtight soft robotic devices using commercially available thermoplastic pellets, providing a versatile, cost‐effective, and scalable alternative to soft lithography with mechanical performance comparable to silicone elastomers. 
    more » « less
  5. ; ; ; ; ; ; (, Journal of Intelligent Material Systems and Structures)
    Shape memory polymers (SMPs) are capable of returning from a deformed state to their original shape when exposed to external stimuli such as heat, light, or electricity. When integrated with flexible electronics, SMPs enable the development of reconfigurable and adaptive structures that can dynamically change shape in response to their environment. This study employs material extrusion and fused filament fabrication to advance the production of SMP-based morphing structures. Conductive silver traces were embedded within a polylactic acid (PLA)/thermoplastic polyurethane (TPU) SMP matrix to enable shape recovery via Joule heating, in addition to direct thermal activation. The use of SMPs in various colors further enables light-responsive morphing. The printing process was studied to enhance the topographic quality of both the PLA/TPU matrix and silver traces. Thermo-mechanical characterization of the printed SMP was conducted to evaluate its mechanical strength, recoverable strain, and glass transition temperature. Functional prototypes were fabricated to demonstrate morphing in response to heat, light, and electrical inputs. Eventually, a multiphysics finite element model was developed to predict their deformation under electrical stimulation. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email