More Like this

1. Powder contamination during laser powder bed fusion: Inconel 718 in Ti6Al4V

   https://doi.org/10.1016/j.matlet.2024.136465  

   Groden, Cory ; Traxel, Kellen D ; Bandyopadhyay, Amit ( June 2024 , Materials Letters)

   Powder contamination during laser powder bed fusion is a critical concern for the quality assurance of parts. Herein, we studied the effect of Inconel 718 contamination on the properties of printed Ti6Al4V, two commonly printed alloys. Contaminated parts exhibited visual and microstructural defects, and a mere 0.5wt% IN718 contamination resulted in a 43% reduction in plastic strain without noticing surface-level cracking. Further contamination of 2.5 wt% IN718 promotes surface cracking that renders the material unable to deform plastically, highlighting the importance of proper powder handling and the detrimental effects that even small amounts of contaminants can have on AM-produced components. 

   more » « less
2. A powder tabletability equation

   https://doi.org/10.1016/j.powtec.2022.117709  

   Vreeman, Gerrit ; Sun, Changquan Calvin ( July 2022 , Powder Technology)
3. Quantitative investigation of gas flow, powder-gas interaction, and powder behavior under different ambient pressure levels in laser powder bed fusion

   https://doi.org/10.1016/j.ijmachtools.2021.103797  

   Li, Xuxiao ; Guo, Qilin ; Chen, Lianyi ; Tan, Wenda ( November 2021 , International Journal of Machine Tools and Manufacture)

   null (Ed.)
4. Fatigue performance of laser powder bed fusion hydride-dehydride Ti-6Al-4V powder

   https://doi.org/10.1016/j.addma.2022.103117  

   Asherloo, Mohammadreza ; Wu, Ziheng ; Heim, Mike ; Nelson, Dave ; Paliwal, Muktesh ; Rollett, Anthony D. ; Mostafaei, Amir ( November 2022 , Additive Manufacturing)
5. Vapor-induced flow and its impact on powder entrainment in laser powder bed fusion

   https://doi.org/10.1016/j.mtcomm.2023.106669  

   Li, Zhiyong ; Yu, Gang ; He, Xiuli ; Gan, Zhengtao ; Liu, Wing Kam ( August 2023 , Materials Today Communications)