An official website of the United States government
Abstract In this study, a superhydrophobic and superoleophilic stainless mesh coated with polytetrafluoroethylene/silicon dioxide (PTFE/SiO 2 ) was fabricated through electrostatic self-assembly method followed by sintering treatment. The PTFE was utilized to construct low-surface-energy surface and the SiO 2 nanoparticles were added to enhance its surface roughness. The as-prepared stainless mesh exhibited desirable superhydrophobicity and superoleophilicity with a water contact angle of 152° and oil contact angle of 0°. The coated stainless mesh could separate a variety of oil/water mixtures with high efficiency and it also exhibited good recyclability. Moreover, the corrosion-resistance of stainless mesh was greatly improved by coating it with PTFE. The thermogravimetric analysis (TGA) measurements showed that the coated mesh could withstand high temperature of up to 430°C, indicating excellent thermal-resistance. It is believed that this ultra-robust stainless mesh would have significant potential applications in industry.
more »
« less
Design of Carboxylic Acid‐Functionalized Poly(Butylene Adipate‐ co ‐Terephthalate) for Recyclable and Biodegradable Zero‐Waste Paper Packaging
Abstract Demand for water‐ and oil‐repellent‐coated paper as an alternative to plastics is growing, but the challenge is that coated paper lacks concurrent recyclability and biodegradability. Reported herein is a novel carboxylic acid‐functionalized poly(butylene adipate‐co‐terephthalate) (CPBAT) copolymer investigated for recyclable and repulpable water‐borne paper coatings. The CPBAT synthesized here is characterized by spectroscopic methods. Paper coated with waterborne CPBAT exhibited excellent water, oil, moisture, and gas barrier properties suitable for packaging applications. The recyclability and repulpability of the CPBAT‐coated paper are successfully validated via certified TAPPI methods. This work demonstrates the first successful preparation of coated paper that is per‐ and polyfluoroalkyl substances (PFAS)‐free, recyclable, and biodegradable, with significant benefits for the environment and human health.
more »
« less
- Award ID(s):
- 2208697
- PAR ID:
- 10543665
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Sustainable Systems
- Volume:
- 9
- Issue:
- 1
- ISSN:
- 2366-7486
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Conjugated polymers have received significant attention as potentially lightweight and highly tailorable alternatives to inorganic semiconductors, but their synthesis is often complex, produces toxic byproducts, and they are not typically designed to be degradable or recyclable. These drawbacks necessitate dedicated efforts to discover materials with design motifs that enable targeted and efficient degradation of conjugated polymers. In this vein, the synthetic simplicity of 1,4‐dihydropyrrolo[3,2‐b]pyrroles (DHPPs) is exploited to access azomethine‐containing copolymers via a benign acid‐catalyzed polycondensation protocol. Polymerizations involve reacting a dialdehyde‐functionalized dihydropyrrolopyrrole withp‐phenylenediamine as the comonomer usingp‐toluenesulfonic acid as a catalyst. The inherent dynamic equilibrium of the azomethine bonds subsequently enabled the degradation of the polymers in solution in the presence of acid. Degradation of the polymers is monitored via NMR, UV‐vis absorbance, and fluorescence spectroscopies, and the polymers are shown to be fully degradable. Notably, while absorbance measurements reveal a continued shift to higher energies with extended exposure to acid, fluorescence measurements show a substantial increase in the fluorescence response upon degradation. Results from this study encourage the continued development of environmentally‐conscious polymerizations to attain polymeric materials with useful properties while simultaneously creating polymers with structural handles for end‐of‐life management or/and recyclability.more » « less
-
Abstract The United States produces more than 10 million tons of waste oils and fats each year. This paper aims to establish a new biomanufacturing platform that converts waste oils or fats into a series of value‐added products. Our research employs the oleaginous yeastYarrowia lipolyticaas a case study for citric acid (CA) production from waste oils. First, we conducted the computational fluid dynamics (CFD) simulation of the bioreactor system and identified that the extracellular mixing and mass transfer is the first limiting factor of an oil fermentation process due to the insolubility of oil in water. Based on the CFD simulation results, the bioreactor design and operating conditions were optimized and successfully enhanced oil uptake and bioconversion in fed‐batch fermentation experiments. After that, we investigated the impacts of cell morphology on oil uptake, intracellular lipid accumulation, and CA formation by overexpressing and deleting theMHY1gene in the wild typeY. lipolyticaATCC20362. Fairly good linear correlations (R2 > 0.82) were achieved between cell morphology and productivities of biomass, lipid, and CA. Finally, fermentation kinetics with both glucose and oil substrates were compared and the oil fermentation process was carefully evaluated. Our study suggests that waste oils or fats can be economical feedstocks for biomanufacturing of many high‐value products.more » « less
-
Abstract Chemically recyclable polymers offer a promising solution to address the issues associated with the unsustainable use of plastics by converting the traditional linear plastic economy into a circular one. Central to developing chemically recyclable polymers is to identify the appropriate monomers that enable practical conditions for polymerization and depolymerization and ensure useful stability and material properties. Our group has recently demonstrated thattrans‐cyclobutane‐fused cyclooctene (tCBCO) meets the abovementioned requirements and is a promising candidate for developing chemically recyclable polymers. Herein, encouraged by the success withtCBCO, we investigate the thermodynamics of polymerization of a relevant system,trans‐benzocyclobutene‐fused‐cyclooctene, which can be viewed astCBCO with an additional benzene ring. The study shows that introducing an additional benzene ring favors polymerization and disfavors depolymerization, and the effect is predominantly entropic. The benzo‐effect can be leveraged to fine‐tune the thermodynamics of polymerization and depolymerization to facilitate the chemical recycling of polymers.more » « less
-
Air bubbles rising through an aqueous medium have been studied extensively and are routinely used for the separation of particulates via froth flotation, a key step in many industrial processes. Oil-coated bubbles can be more effective for separating hydrophilic particles with low affinity for the air–water interface, but the rise dynamics of oil-coated bubbles has not yet been explored. In the present work, we report the first systematic study of the shape and rise trajectory of bubbles engulfed in a layer of oil. Results from direct observation of the coated bubbles with a high-speed camera are compared to computer simulations and confirm a pronounced effect of the oil coat on the bubble dynamics. We consistently find that the oil-coated bubbles display a more spherical shape and straighter trajectory, yet slower rise than uncoated bubbles of comparable size. These characteristics may provide practical benefits for flotation separations with oil-coated bubbles.more » « less
