An official website of the United States government
This data is an on-going collection of soil temperature, soil moisture, soil CO2 concentration, and soil O2 concentration starting in October 2021. We have installed sensors and probes at different soil depths across landscapes in five of the former Critical Zone Observatory locations (see the document named "sensor location"). Soil temperature and moisture are measured using Acclima SDI-12 sensors. Soil CO2 concentrations are measured using Eosense CO2 probes (switching to Vaisala GMP343 and GMP251 in 2023). Soil O2 concentrations are measured using Apogee SO-110-L-10 soil oxygen sensors. This dataset, along with our measurements of soil geomicrobiology and biogeochemistry (available in EarthChem), will help us understand the role of microbes as drivers of Critical Zone biogeochemistry and soil formation.
more »
« less
A Sensor Probe with Active and Passive Humidity Management for In Situ Soil CO2 Monitoring
Soil CO2 concentration and flux measurements are important in diverse fields, including geoscience, climate science, soil ecology, and agriculture. However, practitioners in these fields face difficulties with existing soil CO2 gas probes, which have had problems with high costs and frequent failures when deployed. Confronted with a recent research project’s need for long-term in-soil CO2 monitoring at a large number of sites in harsh environmental conditions, we developed our own CO2 logging system to reduce expense and avoid the expected failures of commercial instruments. Our newly developed soil probes overcome the central challenge of soil gas probes—surviving continuous exposure to soil moisture while remaining open to soil gases—via three approaches: a 3D printed housing (economical for small-scale production) following design principles that correct the usual water permeability flaw of 3D printed materials; passive moisture protection via a hydrophobic, CO2-permeable PTFE membrane; and active moisture protection via a low-power micro-dehumidifier. Our CO2 instrumentation performed well and yielded a high-quality dataset that includes signals related to a prescribed fire as well as seasonal and diel cycles. We expect our technology to support underground CO2 monitoring in fields where it is already practiced and stimulate its expansion into diverse new fields.
more »
« less
- PAR ID:
- 10545667
- Publisher / Repository:
- MDPI
- Date Published:
- Journal Name:
- Sensors
- Volume:
- 24
- Issue:
- 18
- ISSN:
- 1424-8220
- Page Range / eLocation ID:
- 6034
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Improving agricultural production relies on the decisions and actions of farmers and land managers, highlighting the importance of efficient soil monitoring techniques for better resource management and reduced environmental impacts. Despite considerable advancements in soil sensors, their traditional bulky counterparts cause difficulty in widespread adoption and large-scale deployment. Printed electronics emerge as a promising technology, offering flexibility in device design, cost-effectiveness for mass production, and a compact footprint suitable for versatile deployment platforms. This review overviews how printed sensors are used in monitoring soil parameters through electrochemical sensing mechanisms, enabling direct measurement of nutrients, moisture content, pH value, and others. Notably, printed sensors address scalability and cost concerns in fabrication, making them suitable for deployment across large crop fields. Additionally, seamlessly integrating printed sensors with printed antenna units or traditional integrated circuits can facilitate comprehensive functionality for real-time data collection and communication. This real-time information empowers informed decision-making, optimizes resource management, and enhances crop yield. This review aims to provide a comprehensive overview of recent work related to printed electrochemical soil sensors, ultimately providing insight into future research directions that can enable widespread adoption of precision agriculture technologies.more » « less
-
Among many anthropogenic sources of greenhouse gases (GHG), landfill emissions, consisting of methane (CH4) and carbon dioxide (CO2), are one of the major contributors of anthropogenic GHG. In recent years, various innovative landfill biocovers have been investigated and developed to mitigate the emissions of methane (CH4) from municipal solid waste (MSW) landfills. However, the problem of CO2 emissions [which constitute about 40% of landfill gas (LFG)] from MSW landfills still remains unresolved. An innovative cover system which consists of basic oxygen furnace (BOF) slag with biochar amended soil is being developed to mitigate CH4 and CO2 emissions from landfills. The biochar amended soil is effective in mitigating CH4 emissions by microbial methane oxidation, while BOF slag could be effective in sequestering CO2 emissions by carbonation mechanisms. However, the properties of BOF slag vary based on several factors such as mineralogical composition of slag, particle size, moisture content, and temperature. In this study, CO2 sequestration potential of BOF slag was evaluated under synthetic LFG condition. The performance of the BOF slag in sequestering CO2 under different moisture condition was also examined. The results showed that BOF slag can sequester substantial amount of CO2 under LFG condition. The study also enlightened the importance of moisture for initiating carbonation reaction; however, the moisture alone was not the controlling parameter for CO2 sequestration. The mineralogy of the BOF slag plays an important role in determining CO2 sequestration capacity of the slag.more » « less
-
null (Ed.)Herbivory can have strong impacts on greenhouse gas fluxes in high-latitude ecosystems. For example, in the Yukon-Kuskokwim (Y-K) Delta in western Alaska, migratory goose grazing affects the magnitude of soil carbon dioxide (CO2) and methane (CH4) fluxes. However, the underlying drivers of this relationship are unclear, as few studies systematically tease apart the processes by which herbivores influences soil biogeochemistry. To examine these mechanisms in detail, we conducted a laboratory incubation experiment to quantify changes in greenhouse gas fluxes in response to three parameters altered by herbivores in situ: temperature, soil moisture content, and nutrient inputs. These treatments were applied to soils collected in grazing lawns and nearby ungrazed habitat, allowing us to assess how variation in microbial community structure influenced observed responses. We found pronounced differences in both fungal and prokaryotic community composition between grazed and ungrazed areas. In the laboratory incubation experiment, CO2 and CH4 fluxes increased with temperature, soil moisture, and goose fecal addition, suggesting that grazing-related changes in the soil abiotic environment may enhance soil C losses. Yet, these abiotic drivers were insufficient to explain variation in fluxes between soils with and without prior grazing. Differences in trace gas fluxes between grazed and ungrazed areas may result both from herbivore-induced shifts in abiotic parameters and grazing-related alterations in microbial community structure. Our findings suggest that relationships among herbivores and soil microbial communities could mediate carbon-climate feedbacks in rapidly changing high-latitude ecosystems.more » « less
-
Accurate and near real-time volumetric soil water and volumetric ion content (VIC) measurements can both inform precise irrigation scheduling and aid in fertilizer management applications in cropping systems. To assist in the monitoring of these measurements, capacitance-based soil moisture probes are used in agricultural best management practice (BMP) programs. However, the ability of these sensors to detect nutrients in the soil sourced from fertilizers is not well understood. The objective of this study was to evaluate the sensitivity of a capacitance-based soil moisture probe in detecting Nitrogen (N), Phosphorous (P), and Potassium (K) movement in the soil. To achieve this, a laboratory-based setup was established using pure sand soil cores. Raw soil moisture and VIC probe readings from the cores were contrasted across multiple N, P, and K rates. The N treatments applied were rates of 0, 112, 168, and 224 kg/ha; for P, were 0, 3.76, and 37.6 kg/ha, and for K were 0, 1.02, 1.53, and 2.04 kg/ha. Each nutrient was evaluated separately using a randomized complete block design experiment with three replications for N and K, and 5 replications for P. The impact of each nutrient rate on the sensitivity of VIC readings was determined by evaluating differences in three points of the time series, including the observed maximum point, inflection point, and convergence value as well as the time of occurrence of those points over a 24-hour period. These points were assessed at depths 5, 15, 25, 35, 45, and 55 cm. The findings of this study highlight the capacitance-based soil moisture probes’ responsiveness to changes in all K rates at most depths. However, its sensitivity to changes in N and P rates is comparatively lower. The results obtained in this study can be used to develop fertilizer management protocols that utilize K movement as the baseline to indirectly assess N and P, while helping to inform those who currently use the probe which nutrients the probe may be detecting. The probes’ readings could be incorporated into decision support systems for irrigation and nutrient management and improve control systems for precision water and nutrient management.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/s24186034
