skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Surface‐Grafted Biocompatible Polymer Conductors for Stable and Compliant Electrodes for Brain Interfaces
Abstract Durable and conductive interfaces that enable chronic and high‐resolution recording of neural activity are essential for understanding and treating neurodegenerative disorders. These chronic implants require long‐term stability and small contact areas. Consequently, they are often coated with a blend of conductive polymers and are crosslinked to enhance durability despite the potentially deleterious effect of crosslinking on the mechanical and electrical properties. Here the grafting of the poly(3,4 ethylenedioxythiophene) scaffold, poly(styrenesulfonate)‐b‐poly(poly(ethylene glycol) methyl ether methacrylate block copolymer brush to gold, in a controlled and tunable manner, by surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) is described. This “block‐brush” provides high volumetric capacitance (120 F cm─3), strong adhesion to the metal (4 h ultrasonication), improved surface hydrophilicity, and stability against 10 000 charge–discharge voltage sweeps on a multiarray neural electrode. In addition, the block‐brush film showed 33% improved stability against current pulsing. This approach can open numerous avenues for exploring specialized polymer brushes for bioelectronics research and application.  more » « less
Award ID(s):
2223566 2011924 2011967
PAR ID:
10547518
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
Publisher / Repository:
Wiley-VCH
Date Published:
Journal Name:
Advanced Healthcare Materials
ISSN:
2192-2640
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, Advanced Functional Materials)
    Abstract The challenge of fabricating transparent and conductive (T/C) films and patterns for applications in flexible electronics, touch screens, solar cells, and smart windows remains largely unsolved. Traditional fabrication techniques are complex, costly, time‐consuming, and struggle to achieve the necessary precision and accuracy over electronic and optical properties. Here, hypersurface photolithography (HP), which integrates microfluidics, a digital micromirror device, and photochemical surface‐initiated polymerizations is used to create polymer brush patterns. The high‐throughput optimization enabled by HP provides conditions to fabricate patterns composed of cross‐linked polymer brushes containing Au‐binding 2‐vinylpyrrolidine (2VP) groups with precise control over the height and the composition at each pixel. Au nanoparticles (AuNPs) are incorporated into the polymer brush patterns through in situ reduction of Au ions, resulting in T/C composite AuNP/polymer brush patterns. The sheet resistance at 100 mA of a 2VP‐AuNP‐functionalized patterns on a glass substrate is 0.42 Ω sq−1with 86% transmittance of visible light. Additional patterns demonstrate multiplexing by copatterning rhodamine B functionalized fluorescent polymer brushes and AuNP/polymer brush conductive domains. This work solves the challenge of creating T/C films by forming metal‐polymer composites from polymer brush patterns, offering a scalable solution for electronic and optical device development and fabrication. 
    more » « less
  2. ; ; ; ; ; ; ; ; (, Advanced Science)
    Abstract This present study illustrates the synthesis and preparation of polyoxanorbornene‐based bottlebrush polymers with poly(ethylene oxide) (PEO) side chains by ring‐opening metathesis polymerization for solid polymer electrolytes (SPE). In addition to the conductive PEO side chains, the polyoxanorbornene backbones may act as another ion conductor to further promote Li‐ion movement within the SPE matrix. These results suggest that these bottlebrush polymer electrolytes provide impressively high ionic conductivity of 7.12 × 10−4S cm−1at room temperature and excellent electrochemical performance, including high‐rate capabilities and cycling stability when paired with a Li metal anode and a LiFePO4cathode. The new design paradigm, which has dual ionic conductive pathways, provides an unexplored avenue for inventing new SPEs and emphasizes the importance of molecular engineering to develop highly stable and conductive polymer electrolytes for lithium‐metal batteries (LMB). 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Functional Materials)
    Abstract Skin‐like robust materials with prominent sensing performance have potential applications in flexible bioelectronics. However, it remains challenging to achieve mutually exclusive properties simultaneously including low interfacial impedance, high stretchability, sensitivity, and electrical resilience. Herein, a material and structure design concept of mixed ion‐electron conduction and mechanical interlocking structure is adopted to fabricate high‐performance mechanical‐bioelectrical dual‐modal composites with large stretchability, excellent mechanoelectrical stability, low interfacial impedance, and good biocompatibility. Flower‐like conductive metal‐organic frameworks (cMOFs) with enhanced conductivity through the overlapped level of metal‐ligand orbital are assembled, which bridge carbon nanotubes (denoted as cMOFs‐b‐CNTs). Then, precursor of poly(styrene‐block‐butadiene‐block‐styrene)/ionic liquid penetrates the pores and cavities in cMOFs‐b‐CNTs‐based network fabricated via filtration process, creating a semi‐embedded structure via mechanical interlocking. Thus, the mixed ion‐electron conduction and semi‐embedded structure endow the as‐prepared composites with a low interfacial impedance (51.60/28.90 kΩ at 10/100 Hz), wide sensing range (473%), high sensitivity (2195.29), rapid response/recovery time (60/85 ms), low limit of detection (0.05%), and excellent durability (>5000 cycles to 50% strain). Demonstrations of multifunctional mechanical‐bioelectrical dual‐modal sensors for in vivo/vitro monitoring physiological motions, electrophysiological activities, and urinary bladder activities validate the possibility for practical uses in biomedical research areas. This concept creates opportunities for the construction of durable skin‐like sensing materials. 
    more » « less
  4. ; ; ; (, Macromolecular Rapid Communications)
    Abstract Radioactive pertechnetate (TcO4−) from the nuclear fuel cycle presents a severe risk to the environment due to its large solubility in water and non‐complexing nature. By utilizing the chaotropic properties of TcO4−and its nonradioactive surrogate perrhenate (ReO4−) and the principle of chaotropic interactions, a series of quaternary ammonium‐containing polyelectrolyte brush‐grafted silica particles are designed and applied to remove ReO4−from water. These cationic hairy particles (HPs) are synthesized by surface‐initiated atom transfer radical polymerization of 2‐(N,N‐dimethylamino)ethyl methacrylate and subsequent quaternization with various halogen compounds. Dynamic light scattering (DLS) studies showed that the HPs with sufficiently longN‐alkyl andN‐benzyl substituents underwent sharp size reduction transitions in water when titrated with a KReO4solution, indicating strong chaotropic interactions between the brushes and ReO4−. All the HPs exhibited fast adsorption kinetics; the HPs with longerN‐alkyl andN‐benzyl substituents showed higher capabilities of removing ReO4−than those with shorterN‐alkyls. Moreover, the brush particles with longerN‐substituents displayed a significantly stronger ability in selective adsorption of ReO4−than the particles with shorterN‐substituents in the presence of competing anions, such as F−, Cl−, NO3−, and SO42−. This work opens a new avenue to design high‐performance adsorbent materials for TcO4−and ReO4−. 
    more » « less
  5. ; ; ; ; (, Macromolecular Rapid Communications)
    Block copolymer brushes are of great interest due to their rich phase behavior and value-added properties compared to homopolymer brushes. Traditional synthesis involves grafting-to and grafting-from methods. In this work, a recently developed “polymer-single-crystal-assisted-grafting-to” method is applied for the preparation of block copolymer brushes on flat glass surfaces. Triblock copolymer poly(ethylene oxide)-b-poly(L-lactide)-b-poly(3-(triethoxysilyl)propyl methacrylate) (PEO-b-PLLA-b-PTESPMA) was synthesized with PLLA as the brush morphology-directing component and PTESPMA as the anchoring block. PEO-b-PLLA block copolymer brushes are obtained by chemical grafting of the triblock copolymer single crystals onto a glass surface. The tethering point and overall brush pattern are determined by the single crystal morphology. The grafting density is calculated to be ~ 0.36 nm-2 from the atomic force microscopy results and is consistent with the theoretic calculation based on the PLLA crystalline lattice. This work provides a new strategy to synthesize well-defined block copolymer brushes. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email