An official website of the United States government
Abstract Cognitive buildings use data on how occupants respond to the built environment to proactively make occupant-centric adjustments to lighting, temperature, ventilation, and other environmental parameters. However, sensors that unobtrusively and ubiquitously measure occupant responses are lacking. Here we show that Doppler-radar based sensors, which can sense small physiological motions, provide accurate occupancy detection and estimation of vital signs in challenging, realistic circumstances. Occupancy was differentiated from an empty room over 93% of the time in a 3.4 m × 8.5 m conference room with a single sensor in both wall and ceiling-mounted configurations. Occupancy was successfully detected while an occupant was under the table, visibly blocked from the sensor, a scenario where infrared, ultrasound, and video-based occupancy sensors would fail. Heart and respiratory rates were detected in all seats in the conference room with a single ceiling-mounted sensor. The occupancy sensor can be used to control HVAC and lighting with a short, 1–2 min delay and to provide information for space utilization optimization. Heart and respiratory rate sensing could provide additional feedback to future human-building interactive systems that use vital signs to determine how occupant comfort and wellness is changing with time.
more »
« less
Doppler Radar Occupancy Sensor Assessment of Thermal Adaptation
This study examines the use of a Doppler radar occupancy sensor to assess thermal adaptation. Current heating, ventilation, and air-conditioning (HVAC) systems are important for the productivity of employees and the healing of patients; however, their control systems are typically limited to a narrow temperature range, which is usually not comfortable for most occupants. Occupant vital signs can be used to assess thermal comfort, due to the role cardiovascular regulation plays in heat dissipation. This research aims to correlate physiological and thermal adaptation with the goal of optimizing HVAC system operation. A Doppler radar occupancy sensor was used to measure the physiological parameters of ten human subjects under two temperature conditions, and thermal comfort surveys were used to record thermal sensation. The results demonstrate that the Doppler radar occupancy sensor could not only detect heart rate changes due to a significant environmental temperature difference but also detect subtle changes in heart rate during thermal adaptation that were not captured by the surveys.
more »
« less
- PAR ID:
- 10547787
- Publisher / Repository:
- IEEE
- Date Published:
- ISBN:
- 978-1-6654-9418-2
- Page Range / eLocation ID:
- 402 to 404
- Subject(s) / Keyword(s):
- Doppler radar occupancy sensor thermal comfort heart rate
- Format(s):
- Medium: X
- Location:
- Taipei, Taiwan
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Understanding occupants’ thermal sensation and comfort is essential to defining the operational settings for Heating, Ventilation and Air Conditioning (HVAC) systems in buildings. Due to the continuous impact of human and environmental factors, occupants’ thermal sensation and comfort level can change over time. Thus, to dynamically control the environment, thermal comfort should be monitored in real time. This paper presents a novel non-intrusive infrared thermography framework to estimate an occupant’s thermal comfort level by measuring skin temperature collected from different facial regions using low- cost thermal cameras. Unlike existing methods that rely on placing sensors directly on humans for skin temperature measurement, the proposed framework is able to detect the presence of occupants, extract facial regions, measure skin temperature features, and interpret thermal comfort conditions with minimal interruption of the building occupants. The method is validated by collecting thermal comfort data from a total of twelve subjects under cooling, heating and steady-state experiments. The results demonstrate that ears, nose and cheeks are most indicative of thermal comfort and the proposed framework can be used to assess occupants’ thermal comfort with an average accuracy of 85%.more » « less
-
Understanding occupants’ thermal comfort is essential for the effective operation of Heating, Ventilation, and Air Conditioning (HVAC) systems. Existing studies of the “human-in-the-loop” HVAC control generally suffer from: (1) excessive reliance on cumbersome human feedback; and (2) intrusiveness caused by conventional data collection methods. To address these limitations, this paper investigates the low-cost thermal camera as a non-intrusive approach to assess thermal comfort in real time using facial skin temperature. The framework developed can automatically detect occupants, extract facial regions, measure skin temperature, and interpret thermal comfort with minimal interruption or participation of occupants. The framework is validated using the facial skin temperature collected from twelve occupants. Personal comfort models trained from different machine learning algorithms are compared and results show that Random Forest model can achieve an accuracy of 85% and also suggest that the skin temperature of ears, nose, and cheeks are most indicative of thermal comfort.more » « less
-
A number of algorithms have been developed to extract heart rate from physiological motion data using Doppler radar system. Yet, it is very challenging to eliminate noise associated with surroundings, especially with a single-channel Doppler radar system. However, single-channel Doppler radars provide the advantage of operating at lower power. Additionally, heart rate extraction using single-channel Doppler radar has remained somewhat unexplored. This has motivated the development of effective signal processing algorithms for signals received from single-channel Doppler radars. Three algorithms have been studied for estimating heart rate. The first algorithm is based on applying FFT on an FIR filtered signal. In the second algorithm, autocorrelation was performed on the filtered data. Thirdly, a peak finding algorithm was used in conjunction with a moving average preceded by a clipper to determine the heart rate. The results obtained were compared with heart rate readings from a pulse oximeter. With a mean difference of 2.6 bpm, the heart rate from Doppler radar matched that from the pulse oximeter most frequently when the peak finding algorithm was used. The results obtained using autocorrelation and peak finding algorithm (with standard deviations of 2.6 bpm and 4.0 bpm) suggest that a single channel Doppler radar system can be a viable alternative to contact heart rate monitors in patients for whom contact measurements are not feasible.more » « less
-
Respiration rate and heart rate variability (HRV) due to respiratory sinus arrhythmia (RSA) are physiological measurements that can offer useful diagnostics for a variety of medical conditions. This study uses a wrist-worn wearable development platform from Maxim Integrated and Doppler radar sensor developed by Adnoviv, Inc. to non-invasively measure these physiological signals. Six datasets are recorded comprising of five different individuals in varying physical environments breathing at different respiration rates. First, respiration rates are extracted from photoplethysmography (PPG) and accelerometer data and compared to Doppler radar. The average maximum and minimum difference between Doppler radar extracted RR and PPG, HRV RSA, and accelerometer extracted RR is 0.342 b/m and 0.171 b/m, respectively. Then, waveforms for Doppler radar, PPG, and HRV RSA signals are plotted in time domain and an analysis discusses the physical phenomena associated with the phase alignment of the signals.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/APMC57107.2023.10439672
