An official website of the United States government
The piezoresistance of carbon nanotube (CNT)-coated microfibers is examined using diametric compression. Diverse CNT forest morphologies were studied by changing the CNT length, diameter, and areal density via synthesis time and fiber surface treatment prior to CNT synthesis. Large-diameter (30–60 nm) and relatively low-density CNTs were synthesized on as-received glass fibers. Small-diameter (5–30 nm) and-high density CNTs were synthesized on glass fibers coated with 10 nm of alumina. The CNT length was controlled by adjusting synthesis time. Electromechanical compression was performed by measuring the electrical resistance in the axial direction during diametric compression. Gauge factors exceeding three were measured for small-diameter (<25 μm) coated fibers, corresponding to as much as 35% resistance change per micrometer of compression. The gauge factor for high-density, small-diameter CNT forests was generally greater than those for low-density, large-diameter forests. A finite element simulation shows that the piezoresistive response originates from both the contact resistance and intrinsic resistance of the forest itself. The change in contact and intrinsic resistance are balanced for relatively short CNT forests, while the response is dominated by CNT electrode contact resistance for taller CNT forests. These results are expected to guide the design of piezoresistive flow and tactile sensors.
more »
« less
Carbon‐Nanotube Microelectrodes for Electrochemical Determination of Melatonin
Abstract Voltammetric methods hold promise for the rapid and sensitive quantification of melatonin. This study reports the direct electrochemical quantification of melatonin using carbon nanotube (CNT) fiber cross‐sections as microelectrodes. Six identical highly densified CNT fiber cross‐sections were employed to quantify melatonin in the range of 0.05–100 μM. The limit of detection and quantification were 10 and 35 nM, respectively, with a sensitivity of 0.1322 nA/μM. Interference studies with uric acid, hypoxanthine, and ascorbic acid demonstrate its performance. Real‐world application was highlighted by measuring melatonin in food, pharmaceutical, and human urine samples.
more »
« less
- Award ID(s):
- 2016484
- PAR ID:
- 10549058
- Date Published:
- Journal Name:
- Electroanalysis
- ISSN:
- 1040-0397
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Derivatization reactions are commonly used in mass spectrometry to improve analyte signals, specifically by enhancing the ionization efficiency of those compounds. Vicinal diols are one group of biologically important compounds that have been commonly derivatized using boronic acid. In this study, a boronic acid with a tertiary amine was adapted for the derivatization of vicinal diol metabolites in B73 maize tissue cross‐sections for mass spectrometry imaging analysis. Using this method, dozens of vicinal diol metabolites were derivatized, effectively improving the signal of those metabolites. Many of these metabolites were tentatively assigned using high‐resolution accurate mass measurements. In addition, reaction interference and cross‐reactivity with various other functional groups were systematically studied to verify data interpretation.more » « less
-
Graphene-based nanostructures hold immense potential as strong and lightweight materials, however, their mechanical properties such as modulus and strength are difficult to fully exploit due to challenges in atomic-scale engineering. This study presents a database of over 2,000 pristine and defective nanoscale CNT bundles and other graphitic assemblies, inspired by microscopy, with associated stress–strain curves from reactive molecular dynamics (MD) simulations using the reactive INTERFACE force field (IFF-R). These 3D structures, containing up to 80,000 atoms, enable detailed analyses of structure-stiffness-failure relationships. By leveraging the database and physics- and chemistry-informed machine learning (ML), accurate predictions of elastic moduli and tensile strength are demonstrated at speeds 1,000 to 10,000 times faster than efficient MD simulations. Hierarchical Graph Neural Networks with Spatial Information (HS-GNNs) are introduced, which integrate chemistry knowledge. HS-GNNs as well as extreme gradient boosted trees (XGBoost) achieve forecasts of mechanical properties of arbitrary carbon nanostructures with only 3 to 6% mean relative error. The reliability equals experimental accuracy and is up to 20 times higher than other ML methods. Predictions maintain 8 to 18% accuracy for large CNT bundles, CNT junctions, and carbon fiber cross-sections outside the training distribution. The physics- and chemistry-informed HS-GNN works remarkably well for data outside the training range while XGBoost works well with limited training data inside the training range. The carbon nanostructure database is designed for integration with multimodal experimental and simulation data, scalable beyond 100 nm size, and extendable to chemically similar compounds and broader property ranges. The ML approaches have potential for applications in structural materials, nanoelectronics, and carbon-based catalysts.more » « less
-
Abstract The aim of this study was to develop a high‐performance liquid chromatography–tandem mass spectrometry method for the determination of 6‐cyanodopamine, 6‐nitrodopamine, 6‐nitrodopa, 6‐nitroadrenaline and 6‐bromodopamine in human plasma samples. Strata‐X 33 μm solid‐phase extraction cartridges were used for the extraction of the catecholamines from human plasma samples. The catecholamines were separated in a 150 × 3 mm Shim‐pack GIST C18‐AQ column with 3 μm particle size, placed in an oven at 40°C and perfused with 82% mobile phase A (acetonitrile–H2O; 90:10, v/v) + 0.4% acetic acid and 18% mobile phase B (deionized H2O) + 0.2% formic acid at a flow rate of 340 μl/min in isocratic mode. The injected volume was 4 μl and the run lasted 4 min. The method was linear from 0.1 to 20 ng/ml and the lower limit of quantification was 0.1 ng/ml for all analytes. The method was applied to evaluate the plasma levels of catecholamines in plasma of patients with chronic kidney disease and allowed the detection for the first time of circulating levels of the novel catecholamines 6‐bromodopamine and 6‐cyanodopamine.more » « less
-
Abstract Carbon nanotube (CNT)‐reinforced polymer fibers have broad applications in electrical, thermal, optical, and smart applications. The key for mechanically robust fibers is the precise microstructural control of these CNTs, including their location, dispersion, and orientation. A new methodology is presented here that combines dry‐jet‐wet spinning and forced assembly for scalable fabrication of fiber composites, consisting of alternating layers of polyacrylonitrile (PAN) and CNT/PAN. The thickness of each layer is controlled during the multiplication process, with resolutions down to the nanometer scale. The introduction of alternating layers facilitates the quality of CNT dispersion due to nanoscale confinement, and at the same time, enhances their orientation due to shear stress generated at each layer interface. In a demonstration example, with 0.5 wt% CNTs loading and the inclusion of 170 nm thick layers, a composite fiber shows a significant mechanical enhancement, namely, a 46.4% increase in modulus and a 39.5% increase in strength compared to a pure PAN fiber. Beyond mechanical reinforcement, the presented fabrication method is expected to have enormous potential for scalable fabrication of polymer nanocomposites with complex structural features for versatile applications.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1002/elan.202400191
