skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Suzuki–Miyaura catalyst-transfer polymerization: new mechanistic insights
Controlled preparation of structurally precise complex conjugated polymer systems remains to be a major synthetic challenge still to be addressed, and this push is stimulated by the improved device performance as well as unique fundamental characteristics that the well-defined conjugated polymer materials possess. Catalyst-transfer polymerization (CTP) based on Pd-catalyzed Suzuki-Miyaura cross-coupling reaction is currently one of the most promising methods towards achieving such a goal, especially with the recent implementation of N-methyliminodiacetic acid (MIDA) boronates as monomers in CTP. Further expansion and development of practical applications of CTP methods will hinge on a clear mechanistic understanding of both the entire process and the particular steps involved in the catalytic cycle. In this work, we introduced Ag+-mediated Suzuki-Miyaura CTP and demonstrated that presence of Ag+ shifted a key transmetalation step toward the oxo-Pd pathway, leading to direct participation of MIDA-boronates in the transmetalation step and hence in the polymerization process, and resulting in the overall more efficient polymerization. In addition, we found that, under Ag+-mediated conditions, MIDA-boronates can also directly participate in small-molecule cross-coupling reactions. The direct participation of MIDA-boronates in Suzuki-Miyaura cross-coupling has not been envisaged previously and could enable new interesting possibilities to control this reaction both for small-molecule and macromolecular syntheses. In contrast to MIDA-boronates, boronic acid monomers likely undergo transmetalation through an alternative boronate pathway, although they may also be directed to react via the oxo-Pd transmetalation pathway in Ag+-mediated conditions. The interplay between the two transmetalation pathways which are both involved in the catalyst-transfer polymerization, and the opportunity to selectively enhance one of them not only improves mechanistic understanding of Suzuki-Miyaura CTP process but also provides a previously unexplored possibility to gain more effective control over the polymerization to obtain structurally better-defined conjugated polymers.  more » « less
Award ID(s):
2004117 2117776
PAR ID:
10549949
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
Royal Society of Chemistry
Date Published:
Journal Name:
Polymer Chemistry
Volume:
14
Issue:
37
ISSN:
1759-9954
Page Range / eLocation ID:
4319-4337
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Controlled polymerization for the synthesis of structurally precise conjugated polymers remains a challenging problem in polymer chemistry. Catalyst-transfer polymerization (CTP) based on Pd-catalyzed Suzuki-Miyaura cross-coupling is one of the promising approaches toward solving this challenge. Recent introduction of N-methyliminodiacetic acid (MIDA) boronates as monomers for Suzuki-Miyaura CTP has extended this approach towards a broader variety of monomer structures and led to improved control over the polymerization, particularly for heteroaromatic systems (such as thiophenes). Previously, we found that MIDA-boronate monomers polymerization could be facilitated by Ag+-mediated reaction conditions due to shifting the Pd catalytic cycle toward a more efficient oxo-Pd transmetalation pathway where MIDA-boronates could participate in transmetalation directly, without prior hydrolysis to boronic acid. In this work, we continued studying this novel process, and investigated the dual role of the MIDA-boronate functional group in the case of less reactive fluorenyl (and potentially other all-carbon aromatic systems) monomers. With such monomers, MIDA-boronate group enables the controlled polymerization but also produces a hydrolysis byproduct hindering the polymerization. We also investigated the role of Ag+ acting to counteract this hindering effect. Steric bulkiness of the MIDA-boronate functional group may also slow down the Suzuki-Miyaura CTP process. These complications could reduce the synthetic value of MIDA-boronate monomers in Suzuki-Miyaura CTP, although better understanding of these implications and a proper choice of polymerization conditions and catalytic initiators could to some extent mitigate such problems. As part of this work, we also uncovered a "critical length" phenomenon which results in a dual molecular weight distribution of the resulting conjugated polymer, both with MIDA-boronate and boronic acid monomers. This phenomenon could account for the experimentally observed loss of polymerization control beyond formation of the polymer chains of a certain "critical length", even despite the formally "living" nature of the polymer chains. The generality of this phenomenon and whether it is restricted to using Pd catalytic systems based on Buchwald-type phosphine ligands remains to be studied. Overall, these new findings paint a sophisticated picture of the Suzuki-Miyaura CTP process with MIDA-boronate monomers where the mere presence of a Pd center on the polymer chain is not sufficient to sustain the polymerization (even if a chain could be considered "living" in a sense of possessing a Pd center), and the choice of phosphine ligand on the Pd center is an effective tool to overcome the "critical length" restriction. 
    more » « less
  2. Abstract Palladium‐catalyzed Suzuki‐Miyaura (SM) coupling is widely utilized in the construction of carbon‐carbon bonds. In this study, nanoelectrospray ionization mass spectrometry (nanoESI‐MS) is applied to simultaneously monitor precatalysts, catalytic intermediates, reagents, and products of the SM cross‐coupling reaction of 3‐Br‐5‐Ph‐pyridine and phenylboronic acid. A set of Pd cluster ions related to the monoligated Pd (0) active catalyst is detected, and its deconvoluted isotopic distribution reveals contributions from two neutral molecules. One is assigned to the generally accepted Pd(0) active catalyst, seen in MS as the protonated molecule, while the other is tentatively assigned to an oxidized catalyst which was found to increase as the reaction proceeds. Oxidative stress testing of a synthetic model catalyst 1,5‐cyclooctadiene Pd XPhos (COD−Pd‐XPhos) performed using FeCl3supported this assignment. The formation and conversion of the oxidative addition intermediate during the catalytic cycle was monitored to provide information on the progress of the transmetalation step. 
    more » « less
  3. Abstract In the past decade, direct arylation polymerization (DArP) has rapidly developed as a sustainable synthetic protocol for cost‐effective, atom‐economical preparation of conjugated polymers. By circumventing monomer functionalization with toxic transmetallating reagents such as organostannane and organoboron required for Stille‐Migita and Suzuki‐Miyaura polymerization methods, DArP proceeds through a metal‐catalyzed CH activation pathway for the preparation of high‐performance conjugated polymer materials. This review evaluates the development of several classes of efficient catalysts/catalytic systems from small‐molecule studies to polymerizations, including the mechanisms involved in these transformations and how they inspire catalyst and monomer design for defect‐free conjugated polymer synthesis. Recent advances in developing more sustainable first‐row transition metal catalysts for DArP are also highlighted, and the fundamental understanding of these efficient and sustainable catalysts should motivate the pursuit for the next generation of catalytic design to enable more effective and environmentally friendly conjugated polymer synthesis. 
    more » « less
  4. A Pd-PEPPSI-catalyzed (Pd = Palladium, PEPPSI = pyridine-enhanced precatalyst preparation stabilization and initiation) Suzuki-Miyaura cross-coupling of aryl esters via selective C–O cleavage at room temperature is reported. The developed catalyst system displays broad substrate scope with respect to both components under practical ambient reaction conditions using readily-available, cheap, modular, air- and moisturestable Pd-NHC precatalyst (NHC = N-heterocyclic carbene). The use of water proved crucial for achieving high reactivity in this coupling. The catalyst system represents the mildest conditions for the Suzuki-Miyaura cross-coupling of aryl esters reported to date. The protocol also allowed for achieving TON >1,000 (TON = turnover number) in the Suzuki-Miyaura ester coupling for the first time. 
    more » « less
  5. Direct arylation polymerization (DArP) provides a more sustainable alternative to conventional methods for conjugated polymer synthesis, such as Stille–Migita or Suzuki–Miyura polymerizations. DArP proceeds through a C–H activation pathway, allowing for a reduction in the synthetic steps needed to access the monomer, since the installation of a transmetallating reagent, such as an organostannane or organoboron, is not required. However, compared to small-molecule synthesis, the prevalent conditions employed for DArP still require hazardous or unsustainably sourced reaction components, such as the solvent and transition-metal catalyst. This mini-review highlights recent work on the implementation of sustainable solvents, transition metal catalysts, and overall polymerization methods for DArP. The extension of small-molecule direct arylation conditions towards polymer synthesis is also discussed, along with the associated challenges, mechanistic considerations, and outlook for future work. 
    more » « less