skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Experimental evaluation on the synergistic effect of PC / ABS / DGEBA blend in fracture toughness enhancement of CFRP composites at cryogenic temperatures
Title: Experimental evaluation on the synergistic effect of PC / ABS / DGEBA blend in fracture toughness enhancement of CFRP composites at cryogenic temperatures
Abstract The current study confirms that modified carbon fiber reinforced polymer (CFRP) composites have higher fracture toughness than unmodified CFRP composites achieved by exploiting the synergistic effect of a polycarbonate (PC)/acrylonitrile butadiene styrene (ABS) blend in toughening the diglycidyl ether of bisphenol A (DGEBA) epoxy resin. The CFRP composite specimens are tested at near cryogenic temperatures using TMA, DMA, and microcrack analysis to determine the best‐suited concentration of ABS in the PC/ABS blend. TMA and DMA results, as well as microcrack analysis at cryogenic temperatures (CT), confirm that the blend 90/10 is effective in reducing the brittle nature of DGEBA resin and increasing bond strength, resulting in the fracture toughness enhancement of CFRP specimens at CT. Further investigation of 90/10 modified CFRP (90/10 m‐CFRP) and unmodified CFRP specimens using Mode II fracture using ENF test and SEM analysis reveal significant reduction in brittle characteristics of matrix with increase in elongation at failure and fracture surface morphologies confirm nano web‐like structures bridging the CF layers, proving to improve fiber/matrix bond strength. This study concludes the effectiveness of hybrid PC/ABS blend in synergistically‐modifying DGEBA resin for improved fracture toughness of CFRP laminates across a wide temperature range (−150°C to 150°C).  more » « less
Award ID(s):
1719875
PAR ID:
10549968
Author(s) / Creator(s):
;
Publisher / Repository:
Wiley Online Library
Date Published:
Journal Name:
Polymer Composites
Volume:
44
Issue:
9
ISSN:
0272-8397
Page Range / eLocation ID:
5499 to 5513
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, Macromolecular Chemistry and Physics)
    Abstract Carbon fiber reinforced polymer (CFRP) laminates are modified to enhance their suitability for various thermal applications. A synergistic approach utilizing the effect of various conductive and insulative modifiers with diglycidyl ethers of bisphenol A (DGEBA) epoxy resin and/carbon fiber (CF) is explored. In CFRP laminates developed after modifications made in epoxy resin using a thermoplastic material, such as polycarbonate (PC) and/or acrylonitrile butadiene styrene (ABS), exhibit high thermal resistance (TR) of 77.1% compared to unmodified CFRP. In contrast, modifications made using conductive mediums like phosphonium (P), imidazolium (I), or silanized‐graphene oxide (SGO) have lower TR of 25.7%, 30.5%, and 32.4%, respectively. A temperature gradient (TG) enhancement of 75% is reported for the 1.5 wt% PC/ABS modified CFRP laminates. On the contrary, modifications using 0.5 parts per hundred (phr)P, 0.5 phr I, and 1 g L−1SGO in epoxy reduce the TG by 25%, 30%, and 32%, respectively. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analyses are done to explore the thermal characteristics of each case of modification. Finally, scanning electron microscopy images confirm the distribution profile of the modifiers used. Based on the types of modifications performed, the current study can offer insightful information on the thermal performances of modified CFRP laminates. 
    more » « less
  2. ; ; (, 2024 Solid Freeform Fabrication Conference)
    This paper proposes an efficient experimental method to measure the mode I fracture toughness of large-area additive manufactured polymeric composites. By utilizing either single-bead or double-bead systems bonded to the double cantilever beam (DCB) configuration, we measure intrabead and interbead fracture toughness of acrylonitrile butadiene styrene (ABS) and short carbon fiber-reinforced ABS. The effect of rigid doublers (which are used to eliminate a premature compressive failure) is excluded in the calculation of total energy dissipation, producing a purely interlayer fracture toughness. We found that the critical fracture toughness of carbon fiber/ABS is lower than that of ABS due to the voids within and between the beads. The experimental and data reduction methods developed here can be utilized to optimize the interlayer adhesion of large-scale 3D printed materials. 
    more » « less
  3. ; ; ; (, SAMPE 2019 Proceedings, May 20-23, Charlotte, NC.)
    In this study, unidirectional carbon fiber prepregs that contain long carbon nanofiber (CNF) z threads as a through-thickness (z-directional) reinforcement were manufactured. The CNF z threads are long enough to thread through multiple carbon fiber (CF) arrays, which creates a multi-scale CNF/CF/resin-composite. The CNF z-threaded prepregs were manufactured using an electric-field aligned flow-transferring process. It was hypothesized that the CNF z-threads with the zig-zag threading pattern reinforces the interlaminar and intralaminar regions of the CFRP laminate thus improve the compressive strength by reducing the chance of carbon fiber buckling. Compressive testing was performed per modified version of ASTM D695 (i.e., SACMA SRM 1R 94) to evaluate the compressive strength of the CNF z-threaded CFRP (ZT-CFRP) laminates. The samples were manufactured using AS4 carbon fibers, EPON 862/Epikure-W resin and a 1wt% CNF content. ZT-CFRP testing results were compared with unaligned CNF-modified CFRP (UA-CFRP) and unmodified CFRP samples to investigate the impact of the CNF z-threads on the compressive strength. Results showed an increase of ~15% for the compressive strength of ZT CFRPs, whereas the UA-CFRPs experienced a decrease of ~8% when compared to unmodified CFRPs. It was concluded that CNF/carbon fiber interlocking stops and delays crack growth, and helps to stabilize carbon fibers from further buckling. 
    more » « less
  4. ; ; ; ; ; (, Polymer Composites)
    Abstract Manufacturing and investigating metallic‐glass‐fiber‐reinforced epoxies is an important new attempt to present their potential to contribute to the aviation industry. In order to explore the energy absorption in novel CoFeSiB metallic‐glass‐fiber/epoxy resin composites, CoFeSiB/epoxy resin composite cylinders with different fiber volume fractions were prepared by a hot‐pressing method. The amorphism of the metal fibers was analyzed using x‐ray diffraction. The quasi‐static compression tests were performed on different fiber oriented samples with a diameter of 3.6 mm and a height of 7.2 mm. The sample with the fiber orientation [0°/90°] has a higher energy absorption capacity, compared to the one with the fiber orientation [0°/0°]. The dynamic‐ compression tests were performed on the [0°/0°] samples with a diameter of 3 mm and height of 6 mm at different air pressures. The compression fracture surfaces were examined by scanning electron microscope. Then the energy absorption mechanism of the composites was investigated. This study is of great significance for the energy absorption in amorphous metal fiber/epoxy composites. 
    more » « less
  5. (, Prof. Joseph Koo WebSymposium on Polymer Nanocomposites, Advanced Materials WebCongress 2021, 16-18 November 2021.)
    Carbon fiber reinforced polymer (CFRP) composites have been increasingly used to replace metal parts in many industries such as aerospace, marine, automotive, and sporting goods. The CFRP parts compared with their metallic counter parts have the advantages of lightweight, significantly higher tensile strength, stiffer, and corrosion resistant. On the other hand, compared with many metal parts, the CFRP parts have many well-known disadvantages including the lower toughness, lower through-thickness tensile and shear strengths, lower thermal conductivity, lower electrical conductivity, and lower operating temperature. These disadvantages have made the conversion from metal parts into CFRP parts challenging and costly to design, manufacture, and maintain. The use of nanoparticles in polymer has been studied in the recent two decades. Carbon nanotubes (CNTs) and carbon nanofibers (CNFs) have been dispersed in various thermoset and thermoplastic polymers and improved the mechanical, electrical, and thermal properties; however, the properties were not comparable to CFRP. Later, researchers tried to infuse CNTs or CNFs into either carbon fiber preforms [1] or glass fiber preforms [2] for improving the mechanical properties. But the results were marginal and with great uncertainty due to the challenges of nanoparticle dispersion, filtering, and alignment while being infused through the fiber preform. The glass fiber preform experiments ended with relatively more consistent improvement than the carbon fiber preform experiments since that the glass fiber preform has significantly larger pores than the carbon fiber preform' s. The small pore size presented a great challenge for infusing millions of unaligned long CNTs or CNFs through the carbon fiber preform without being filtered. To infuse long CNFs or CNTs through the carbon fiber preform and achieve reliable improvements, especially for 55% or higher carbon fiber volume fraction with increasingly tighter pores, an innovative plan for the processing and nano-reinforcing strategy is necessary. The z-threading strategy [3, 4, 5] has been reported to have consistent experimental successes in achieving the statistically meaningful improvement in multifunctional properties. The manufacturing steps of the CNF z-threaded CFRP (ZT-CFRP) are: (1) disperse the CNFs in a resin, (2) use a strong electrical field to align the CNFs in either the B-stage epoxy film or a CNF/resin impregnated sponge layer, whereas the CNFs are aligned in the through-thickness direction of the film or sponge layer. (3) place the resin film or sponge layer on a preheated dry carbon fiber fabric and press the resin film into the hot carbon fabric and allow the resin flow to carry the well-aligned CNFs to thread through the pores in the carbon fabric. (4) cool down the resin saturated and CNF z-threaded carbon fiber fabric to obtain the ZT-CFRP prepreg. (5) use the ZT-CFRP prepreg to make the ZT-CFRP laminate. Compared with the traditional CFRP, the ZT-CFRP laminates were reported of having improvement in the Mode-I delamination toughness, interlaminar shear strength, longitudinal compressive strength, through-thickness electrical conductivity, through-thickness thermal conductivity, and can reach the carbon fiber volume fraction of 55-80%. It is an effective approach to achieve a multifunctional CFRP for potentially expanding CFRP's applications. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email