An official website of the United States government
Twin boundaries (TBs) play an essential role in enhancing the mechanical, electronic and transport properties of polycrystalline materials. However, the mechanisms are not well understood. In particular, we considered that they may play an important role in boron rich boron carbide (B vr BC), which exhibits promising properties such as low density, super hardness, high abrasion resistance, and excellent neutron absorption. Here, we apply first-principles-based simulations to identify the atomic structures of TBs in B vr BC and their roles for the inelastic response to applied stresses. In addition to symmetric TBs in B vr BC, we identified a new type of asymmetric twin that constitutes the phase boundaries between boron rich boron carbide (B 13 C 2 ) and B vr BC (B 14 C). The predicted mechanical response of these asymmetric twins indicates a significant reduction of the ideal shear strength compared to single crystals B 13 C 2 and B 14 C, suggesting that the asymmetric twins facilitate the disintegration of icosahedral clusters under applied stress, which in turn leads to amorphous band formation and brittle failure. These results provide a mechanistic basis towards understating the roles of TBs in B vr BC and related superhard ceramics.
more »
« less
Quantum Sensing of Spin Dynamics Using Boron-Vacancy Centers in Hexagonal Boron Nitride
- Award ID(s):
- 2011876
- PAR ID:
- 10551128
- Publisher / Repository:
- American Physical Society
- Date Published:
- Journal Name:
- Physical Review Letters
- Volume:
- 133
- Issue:
- 16
- ISSN:
- 0031-9007; PRLTAO
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Superhard boron-rich boron carbide coatings were deposited on silicon substrates by microwave plasma chemical vapor deposition (MPCVD) under controlled conditions, which led to either a disordered or crystalline structure, as measured by X-ray diffraction. The control of either disordered or crystalline structures was achieved solely by the choice of the sample being placed either directly on top of the sample holder or within an inset of the sample holder, respectively. The carbon content in the B-C bonded disordered and crystalline coatings was 6.1 at.% and 4.5 at.%, respectively, as measured by X-ray photoelectron spectroscopy. X-ray diffraction analysis of the crystalline coating provided a good match with a B50C2-type structure in which two carbon atoms replaced boron in the α-tetragonal B52 structure, or in which the carbon atoms occupied different interstitial sites. Density functional theory predictions were used to evaluate the dynamical stability of the potential B50C2 structural forms and were consistent with the measurements. The measured nanoindentation hardness of the coatings was as high as 64 GPa, well above the 40 GPa threshold for superhardness.more » « less
-
A boron-rich boron–carbide material (B4+δC) was synthesized by spark plasma sintering of a ball-milled mixture of high-purity boron powder and graphitic carbon at a pressure of 7 MPa and a temperature of 1930 °C. This high-pressure, high-temperature synthesized material was recovered and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, Vickers hardness measurements, and thermal oxidation studies. The X-ray diffraction studies revealed a single-phase rhombohedral structure (space group R-3m) with lattice parameters in hexagonal representation as a = 5.609 ± 0.007 Å and c = 12.082 ± 0.02 Å. The experimental lattice parameters result in a value of δ = 0.55, or the composition of the synthesized compound as B4.55C. The high-resolution scans of boron binding energy reveal the existence of a B-C bond at 188.5 eV. Raman spectroscopy reveals the existence of a 386 cm−1 vibrational mode representative of C-B-B linear chain formation due to excess boron in the lattice. The measured Vickers microhardness at a load of 200 gf shows a high hardness value of 33.8 ± 2.3 GPa. Thermal gravimetric studies on B4.55C were conducted at a temperature of 1300 °C in a compressed dry air environment, and its behavior is compared to other high-temperature ceramic materials such as high-entropy transition metal boride. The high neutron absorption cross section, high melting point, high mechanical strength, and thermal oxidation resistance make this material ideal for applications in extreme environments.more » « less
-
Using hexagonal boron nitride (hBN) as a substrate for graphene has shown faster carrier cooling which makes it ideal for high‐power graphene‐based devices. However, the effect of using boron‐isotope‐enriched hBN has not been explored. Herein, femtosecond pump‐probe spectroscopy is utilized to measure and compare the time dynamics of photo‐excited carriers in graphene‐hBN heterostructures for hBN with the natural distribution of boron isotopes (20%10B and 80%11B) and hBN enriched to 100%10B and11B. The carriers cool down faster for systems with isotopically pure hBN substrates by a factor of ≈1.7 times. This difference in relaxation times arises from the interfacial coupling between carriers in graphene and the hBN phonon modes. The results show that the boron isotopic purity of the hBN substrate can help to reduce the hot phonon bottleneck that limits the cooling in graphene devices.more » « less
