An official website of the United States government
Abstract Thermal insulation materials reduce heat transfer and are typically made from materials like fiberglass, foam, or mineral wool, which are engineered to trap air and hinder heat conduction and convection. The traditional manufacturing processes of thermal insulation materials are often energy-intensive and result in significant greenhouse gas emissions. In the current global drive for sustainability, these energy-intensive manufacturing processes raise environmental concerns and need to be addressed. In this work, with the objective of addressing both material sustainability and manufacturing sustainability, we present an additive manufacturing strategy to fabricate biomass materials for thermal insulation applications. We propose utilizing wheat straw as a biomass feedstock for manufacturing sustainable thermal insulation. This approach captures carbon during growth and stores it within the insulation structure. In the presented work, we first demonstrate the formulation of a 3D-printable ink using chopped straw fibers. We conduct comprehensive rheological characterizations to reveal the shear-thinning properties and the printability of the straw fiber ink. Utilizing the direct ink writing (DIW) process, the straw fiber material is deposited into 3D structures. Through material characterization tests, which include microstructure, mechanical, and thermal analyses, we demonstrate the low thermal conductivity and robust mechanical properties. This paper marks the first work of 3D printing of wheat straw fibers for thermal insulation structures. The discoveries in this pilot work demonstrate the potential to leverage additive manufacturing technologies and sustainable biomass materials to create both functional and value-added wheat straw parts tailored for thermal insulation applications.
more »
« less
Additive Manufacturing of Wheat Straw for Sustainable Thermal Insulation Application
Thermal insulation materials reduce heat transfer and are typically made from materials like fiberglass, foam, or mineral wool, which are engineered to trap air and hinder heat conduction and convection. The traditional manufacturing processes of thermal insulation materials are often energy-intensive and result in significant greenhouse gas emissions. In the current global drive for sustainability, these energy-intensive manufacturing processes raise environmental concerns and need to be addressed. In this work, with the objective of addressing both material sustainability and manufacturing sustainability, we present an additive manufacturing strategy to fabricate biomass materials for thermal insulation applications. Firstly, we propose to use biomass materials, such as wheat straw, as the primary feedstock materials for manufacturing. Such biomass materials offer the unique capacity to sequester carbon dioxide during their growth, and when incorporated into thermal insulation structures, they effectively capture and store carbon inside the structure. Concurrently, our pursuit of manufacturing process sustainability is driven by using a cost-effective additive manufacturing technology to fabricate durable thermal insulation structures. In the presented work, we first demonstrate the formulation of a 3D-printable ink using chopped straw fibers. We conduct comprehensive rheological characterizations to reveal the shear-thinning properties and the printability of the straw fiber ink. Utilizing the direct ink writing (DIW) process, the straw fiber material is deposited into 3D structures. Following bulk material characterization tests, including microstructure, mechanical, and thermal tests. We unveil the low thermal conductivity and robust mechanical properties. This paper marks the first work of 3D printing of wheat straw fibers for thermal insulation structures. The discoveries in this pilot work demonstrate the potential to leverage additive manufacturing technologies and sustainable biomass materials to create both functional and value-added wheat straw parts tailored for thermal insulation applications.
more »
« less
- PAR ID:
- 10552226
- Publisher / Repository:
- American Society of Mechanical Engineers
- Date Published:
- ISBN:
- 978-0-7918-8811-7
- Format(s):
- Medium: X
- Location:
- Knoxville, Tennessee, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Amziane, S.; Merta, I.; Page, J. (Ed.)Natural earth-fiber building assemblies such as light straw clay, hempcrete, and clay-plastered straw bales incorporate vegetable by-products that are mixed with geological binders, traditionally used as an insulative infill in building construction. As a geo- and bio-based insulative infill method composed mostly of fiber, heat transfer coefficients are lower than mass materials, making it a compatible assembly that meets energy code requirements. Furthermore, due to their permeability, these materials exhibit high hygric capacity, providing regulated indoor temperatures and relative humidity levels, thus showing a promising future for socially just and healthier built environments. Despite these advantages, the use of earth-fiber building materials in digital construction is still underdeveloped. In the past few years, 3D-printed earth has gained an increasing interest, however, high contents of fibers in earth mixtures have yet to be fully tested and characterized. This paper presents an experimental workflow to characterize fiber-earth composites for 3D printed assemblies, using natural soils infused with natural fibers. The paper begins with a literature review of a range of fibers: straw, hemp, kenaf, sisal, and banana leaves, as well as naturally occurring biopolymer additives. The experimental setup includes manual extrudability and buildability tests, to identify optimal mix designs that are then tested for their printability and buckling using clay 3D printers. As a final deliverable, first pass geometric studies showcase the lightweight and structural possibilities of each material. The significance of this research lies in the development of a methodology for identifying novel mix design for digital fabrication, by increasing carbon storing vegetable fiber content within digital earth, and by creating a range of natural 3D printed assembly types: from mass-insulation walls to paper-thin lightweight partition assemblage.more » « less
-
null (Ed.)Abstract The conventional manufacturing process of aerogel insulation material relies largely on the supercritical drying, which suffers from issues of massive energy consumption, high-cost equipment and prolonged processing time. With the consideration of large market demand of the aerogel insulation material in the next decade, a low-cost and scalable fabrication technique is highly desired. In this paper, a direct ink writing (DIW) method is used to three-dimensionally fabricate the silica aerogel insulation material, followed by room-temperature and ambient pressure drying. Compared to the supercritical drying and freeze-drying, the reported method significantly reduces the fabrication time and costs. The cost-effective DIW technique offers the capability to print complex hollow internal structures, coupled with the porous structure, is found to be beneficial to the thermal insulation property. The addition of fiber to the ink assures the durability of the fabricated product. The foam ink preparation methods and the printability are demonstrated in this paper, along with the printed samples for characterizing thermal insulation performance and mechanical properties.more » « less
-
Composites printed using material extrusion additive manufacturing (AM) typically exhibit alignment of high- aspect-ratio reinforcements parallel to the print direction. This alignment leads to highly anisotropic stiffness, strength, and transport properties. In many cases, it would be desirable to increase mechanical and transport properties transverse to the print direction, for example, in 3D-printed heat sinks or heat exchangers where heat must be moved efficiently between printed roads or layers. Rotational direct ink writing (RDIW), where the deposition nozzle simultaneously rotates and translates during deposition, provides a method to reorient fibers transverse to the print direction during the printing process. In the present work, carbon fiber-reinforced epoxy composites were printed by RDIW with a range of nozzle rotation rates and the in-plane and through-thickness thermal conductivity was measured. In addition, the orientation of carbon fiber (CF) in the composites was measured using optical microscopy and image analysis, from which second-order fiber orientation tensors were calculated. These results showed that the orientation of CF became less anisotropic as nozzle rotation rate increased, leading to increased through-thickness thermal conductivity, which increased by 40% at the highest rotation rate. The orientation tensors also showed that RDIW was more effective at reorienting fibers within the in-plane transverse direction compared to the through-thickness transverse direction. The results presented here demonstrate that a current weakness of material extrusion AM composites—poor thermal conductivity in the through-thickness direction—can be significantly improved with RDIW.more » « less
-
Abstract The macro-porous ceramics has promising durability and thermal insulation performance. As porous ceramics find more and more applications across many industries, a cost-effective and scalable additive manufacturing technique for fabricating macro-porous ceramics is highly desirable. Herein, we reported a facile additive manufacturing approach to fabricate porous ceramics and control the printed porosity. Several printable ceramic inks were prepared, and the foaming agent was added to generate gaseous bubbles in the ink, followed by the direct ink writing and the ambient-pressure and room-temperature drying to create the three-dimensional geometries. A set of experimental studies were performed to optimize the printing quality. The results revealed the optimal process parameters for printing the foamed ceramic ink with a high spatial resolution and fine surface quality. Varying the concentration of the foaming agent enables the controllability of the structural porosity. The maximum porosity can reach 85%, with a crack-free internal porous structure. The tensile tests showed that the printed macro-porous ceramics possessed enhanced durability with the addition of fiber. With a high-fidelity three-dimensional (3D) printing process and the precise controllability of the porosity, we showed that the printed samples exhibited a remarkably low thermal conductivity and durable mechanical strength.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1115/MSEC2024-125491
