An official website of the United States government
Laser frequency combs (LFCs) are an important component of Doppler radial velocity (RV) spectroscopy that pushes fractional precision to the 10−10level, as required to identify and characterize Earth-like exoplanets. However, large intensity variations across the LFC spectrum that arise in the nonlinear broadening limit the range of comb modes that can be used for optimal wavelength calibration with sufficient signal-to-noise ratio. Furthermore, temporal spectral-intensity fluctuations of the LFC, that are coupled to flux-dependent detector defects, alter the instrumental point spread function (PSF) and result in spurious RV shifts. To address these issues and improve calibration precision, spectral flattening is crucial for LFCs to maintain a constant photon flux per comb mode. In this work, we demonstrate a dynamic spectral shaping setup using a spatial light modulator (SLM) over the wavelength range of 800–1300 nm. The custom shaping compensates for amplitude fluctuations in real time and can also correct for wavelength-dependent spectrograph transmission, achieving a spectral profile that delivers the constant readout necessary for maximizing precision. Importantly, we characterize the out-of-loop properties of the spectral flattener to verify a twofold improvement in spectral stability. This technique, combined with our approach of pumping the waveguide spectral broadener out-of-band at 1550 nm, reduces the required dynamic range. While this spectral region is tailored for the LFC employed at the Habitable-zone Planet Finder (HPF) spectrograph, the method is broadly applicable to any LFC used for astronomical spectrograph calibration.
more »
« less
This content will become publicly available on October 29, 2025
Tunable 30 GHz laser frequency comb for astronomical spectrograph characterization and calibration
The search for Earth-like exoplanets with the Doppler radial velocity (RV) technique is an extremely challenging and multifaceted precision spectroscopy problem. Currently, one of the limiting instrumental factors in reaching the required long-term 10−10level of radial velocity precision is the defect-driven subpixel quantum efficiency (QE) variations in the large-format detector arrays used by precision echelle spectrographs. Tunable frequency comb calibration sources that can fully map the point spread function (PSF) across a spectrograph’s entire bandwidth are necessary for quantifying and correcting these detector artifacts. In this work, we demonstrate a combination of laser frequency and mode spacing control that allows full and deterministic tunability of a 30 GHz electro-optic comb together with its filter cavity. After supercontinuum generation, this gives access to any optical frequency across 700–1300 nm. Our specific implementation is intended for the comb deployed at the Habitable-Zone Planet Finder (HPF) spectrograph and its near-infrared Hawaii-2RG array, but the techniques apply to all laser frequency combs (LFCs) used for precision astronomical spectrograph calibration and other applications that require broadband tuning.
more »
« less
- Award ID(s):
- 2016244
- PAR ID:
- 10552661
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optics Letters
- Volume:
- 49
- Issue:
- 21
- ISSN:
- 0146-9592; OPLEDP
- Format(s):
- Medium: X Size: Article No. 6257
- Size(s):
- Article No. 6257
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
High-precision optical time and frequency transfer is accomplished by a collection of laser-based techniques that achieve time dissemination with subpicosecond instabilities and frequency dissemination with instabilities below one part in 1016. The ability to distribute and compare time and frequency at these precisions enables current optical timing networks such as interconnected optical atomic clocks for the redefinition of the second, relativistic geodesy, and fundamental physics tests as well as time and frequency dissemination systems for large-scale scientific instruments. Future optical timing networks promise to expand these applications and enable new advances in distributed coherent sensing, precise navigation, and more. The field of high-precision optical time and frequency transfer has made significant advances over the last 20 years and has begun to transition from technique development to deployment in applications. Here, we present a review of approaches to high-precision optical time and frequency transfer. We first present a brief overview of the metrics used to assess time and frequency transfer. We then provide a discussion of the difference between time transfer and frequency transfer and review the various technical noise sources. We also provide a background on the optical frequency comb and its role in optical time and frequency transfer for additional context. The next sections of the paper cover specific time–frequency transfer techniques and demonstrations beginning with time and frequency transfer over fiberoptic links including continuous-wave (CW) laser-based frequency transfer, CW-laser-based time transfer, and frequency-comb-based time transfer. We then discuss approaches for time and frequency transfer over free-space including pulsed-source time transfer, CW-laser-based frequency transfer, and frequency-comb-based time transfer. Since no known existing review article covers frequency-comb time transfer over free-space, we provide additional details on the technique. Finally, we provide an outlook that outlines outstanding challenges in the field as well as possible future applications.more » « less
-
Precision laser spectroscopy is key to many developments in atomic and molecular physics and the advancement of related technologies such as atomic clocks and sensors. However, in important spectroscopic scenarios, such as astronomy and remote sensing, the light is of thermal origin, and interferometric or diffractive spectrometers typically replace laser spectroscopy. In this work, we employ laser-based heterodyne radiometry to measure incoherent light sources in the near-infrared and introduce techniques for absolute frequency calibration with a laser frequency comb. Measuring the solar continuum, we obtain a signal-to-noise ratio that matches the fundamental quantum-limited prediction given by the thermal photon distribution and our system’s efficiency, bandwidth, and averaging time. With resolving power , we determine the center frequency of an iron line in the solar spectrum to sub-MHz absolute frequency uncertainty in under 10 min, a fractional precision 1/4000 the linewidth. Additionally, we propose concepts that take advantage of refractive beam shaping to decrease the effects of pointing instabilities by , and of frequency comb multiplexing to increase data acquisition rates and spectral bandwidths by comparable factors. Taken together, our work brings the power of telecommunications photonics and the precision of frequency comb metrology to laser heterodyne radiometry, with implications for solar and astronomical spectroscopy, remote sensing, and precise Doppler velocimetry.more » « less
-
Abstract Extreme precision radial velocity (EPRV) measurements contend with internal noise (instrumental systematics) and external noise (intrinsic stellar variability) on the road to 10 cm s−1“exo-Earth” sensitivity. Both of these noise sources are well-probed using “Sun-as-a-star” RVs and cross-instrument comparisons. We built the Solar Calibrator (SoCal), an autonomous system that feeds stable, disk-integrated sunlight to the recently commissioned Keck Planet Finder (KPF) at the W. M. Keck Observatory. With SoCal, KPF acquires signal-to-noise ratio (S/N) ∼ 1200,R= 98,000 optical (445–870 nm) spectra of the Sun in 5 s exposures at unprecedented cadence for an EPRV facility using KPF’s fast readout mode (<16 s between exposures). Daily autonomous operation is achieved by defining an operations loop using state machine logic. Data affected by clouds are automatically flagged using a reliable quality control metric derived from simultaneous irradiance measurements. Comparing solar data across the growing global network of EPRV spectrographs with solar feeds will allow EPRV teams to disentangle internal and external noise sources and benchmark spectrograph performance. To facilitate this, all SoCal data products are immediately available to the public on the Keck Observatory Archive. We compared SoCal RVs to contemporaneous RVs from NEID, the only other immediately public EPRV solar data set. We find agreement at the 30–40 cm s−1level on timescales of several hours, which is comparable to the combined photon-limited precision. Data from SoCal were also used to assess a detector problem and wavelength calibration inaccuracies associated with KPF during early operations. Long-term SoCal operations will collect upwards of 1000 solar spectra per six-hour day using KPF’s fast readout mode, enabling stellar activity studies at high S/N on our nearest solar-type star.more » « less
-
Laser spectroscopy of the229mTh nuclear clock transition is necessary for the future construction of a nuclear-based optical clock. Precision laser sources with broad spectral coverage in the vacuum ultraviolet are needed for this task. Here, we present a tunable vacuum-ultraviolet frequency comb based on cavity-enhanced seventh-harmonic generation. Its tunable spectrum covers the current uncertainty range of the229mTh nuclear clock transition.more » « less
