An official website of the United States government
The pursuit of room temperature quantum optomechanics with tethered nanomechanical resonators faces stringent challenges owing to extraneous mechanical degrees of freedom. An important example is thermal intermodulation noise (TIN), a form of excess optical noise produced by mixing of thermal noise peaks. While TIN can be decoupled from the phase of the optical field, it remains indirectly coupled via radiation pressure, implying a hidden source of backaction that might overwhelm shot noise. Here we report observation of TIN backaction in a high-cooperativity, room temperature cavity optomechanical system consisting of an acoustic-frequency Si3N4trampoline coupled to a Fabry–Perot cavity. The backaction we observe exceeds thermal noise by 20 dB and radiation pressure shot noise by 40 dB, despite the thermal motion being 10 times smaller than the cavity linewidth. Our results suggest that mitigating TIN may be critical to reaching the quantum regime from room temperature in a variety of contemporary optomechanical systems.
more »
« less
Focusing membrane metamirrors for integrated cavity optomechanics
Membrane-based cavity optomechanical systems have been widely successful; however, their chip-scale integration remains a significant challenge. Here we present a solution based on metasurface design. Specifically, by non-periodic photonic crystal patterning of a Si3N4membrane, we realize a suspended metamirror with a finite focal length, enabling formation of a stable optical cavity with a plane end-mirror. We present simulation, fabrication, and characterization of the metamirror using both free-space and cavity-based measurements, demonstrating reflectivities as high as 99% and cavity finesse as high as 600. The mirror radius of curvature (∼30cm) is inferred from the cavity mode spectrum. In combination with phononic engineering, focusing membrane mirrors offer a route towards high-cooperativity, vertically integrated cavity optomechanical systems with applications ranging from precision force sensing to hybrid quantum transduction.
more »
« less
- Award ID(s):
- 2209473
- PAR ID:
- 10553179
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optica
- Volume:
- 11
- Issue:
- 9
- ISSN:
- 2334-2536
- Page Range / eLocation ID:
- 1235
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Dholakia, Kishan; Spalding, Gabriel C (Ed.)Cavity optomechanics has led to advances in quantum sensing, optical manipulation of mechanical systems, and macroscopic quantum physics. However, previous studies have typically focused on cavity optomechanical coupling to translational degrees of freedom, such as the drum mode of a membrane, which modifies the amplitude and phase of the light field. Here, we discuss recent advances in “imaging-based” cavity optomechanics – where information about the mechanical resonator’s motion is imprinted onto the spatial mode of the optical field. Torsion modes are naturally measured with this coupling and are interesting for applications such as precision torque sensing, tests of gravity, and measurements of angular displacement at and beyond the standard quantum limit. In our experiment, the high-Q torsion mode of a Si3N4 nanoribbon modulates the spatial mode of an optical cavity with degenerate transverse modes. We demonstrate an enhancement of angular sensitivity read out with a split photodetector, and differentiate the “spatial” optomechanical coupling found in our system from traditional dispersive coupling. We discuss the potential for imaging-based quantum optomechanics experiments, including pondermotive squeezing and quantum back-action evasion in an angular displacement measurement.more » « less
-
Optical Fabry–Perot cavity with a movable mirror is a paradigmatic optomechanical system. While usually the mirror is supported by a mechanical spring, it has been shown that it is possible to keep one of the mirrors in a stable equilibrium purely by optical levitation without any mechanical support. In this work, we expand previous studies of the nonlinear dynamics of such a system by demonstrating a possibility for mechanical parametric instability and the emergence of the “phonon laser” phenomenon.more » « less
-
In order for optical cavities to enable strong light-matter interactions for quantum metrology, networking, and scalability in quantum computing systems, their mirrors must have minimal losses. However, high-finesse dielectric cavity mirrors can degrade in ultra-high vacuum (UHV), increasing the challenges of upgrading to cavity-coupled quantum systems. We observe the optical degradation of high-finesse dielectric optical cavity mirrors after high-temperature UHV bake in the form of a substantial increase in surface roughness. We provide an explanation of the degradation through atomic force microscopy (AFM), X-ray fluorescence (XRF), selective wet etching, and optical measurements. We find the degradation is explained by oxygen reduction in Ta2O5followed by growth of tantalum sub-oxide defects with height to width aspect ratios near ten. We discuss the dependence of mirror loss on surface roughness and finally give recommendations to avoid degradation to allow for quick adoption of cavity-coupled systems.more » « less
-
Abstract Surface acoustic waves (SAW) and associated devices are ideal for sensing, metrology, and hybrid quantum devices. While the advances demonstrated to date are largely based on electromechanical coupling, a robust and customizable coherent optical coupling would unlock mature and powerful cavity optomechanical control techniques and an efficient optical pathway for long-distance quantum links. Here we demonstrate direct and robust coherent optical coupling to Gaussian surface acoustic wave cavities with small mode volumes and high quality factors (>105measured here) through a Brillouin-like optomechanical interaction. High-frequency SAW cavities designed with curved metallic acoustic reflectors deposited on crystalline substrates are efficiently optically accessed along piezo-active directions, as well as non-piezo-active (electromechanically inaccessible) directions. The precise optical technique uniquely enables controlled analysis of dissipation mechanisms as well as detailed transverse spatial mode spectroscopy. These advantages combined with simple fabrication, large power handling, and strong coupling to quantum systems make SAW optomechanical platforms particularly attractive for sensing, material science, and hybrid quantum systems.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1364/OPTICA.522509
