skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: The performance of subgrid-scale models in large-eddy simulation of Langmuir circulation in shallow water with the finite volume method
Langmuir turbulence consists of Langmuir circulation (LC) generated at the surface of rivers, lakes, bays, and oceans by the interaction between the wind-driven shear and surface gravity waves. In homogeneous shallow water, LC can extend to the bottom of the water column and interact with the bottom boundary layer. Large-eddy simulation (LES) of LC in shallow water was performed with the finite volume method and various forms of subgrid-scale (SGS) model characterized by different near-wall treatments of the SGS eddy viscosity. The wave forcing relative to wind forcing in the LES was set following the field measurements of full-depth LC during the presence of LC engulfing a water column 15 m in depth in the coastal ocean, reported in the literature. It is found that the SGS model can greatly impact the structure of LC in the lower half of the water column. Results are evaluated in terms of (1) the Langmuir turbulence velocity statistics and (2) the lateral (crosswind) length scale and overall cell structure of LC. LES with an eddy viscosity with velocity scale in terms of S and Ω (where S is the norm of the strain rate tensor and Ω is the norm of the vorticity tensor) and a Van Driest wall damping function (referred to as the S-Omega model) is found to provide best agreement with pseudo-spectral LES in terms of the lateral length scale and overall cell structure of LC. Two other SGS models, namely the dynamic Smagorinsky model and the wall-adapting local-eddy viscosity model are found to provide less agreement with pseudo- spectral LES, for example, as they lead to less coherent bottom convergence of the cells and weaker associ ated upward transport of slow downwind moving fluid. Finally, LES with the S-Omega SGS model is also found to lead to good agreement with physical measurements of LC in the coastal ocean in terms of Langmuir turbulence decay during periods of surface heating  more » « less
Award ID(s):
1756902
PAR ID:
10553298
Author(s) / Creator(s):
; ;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Computers fluids
ISSN:
0045-7930
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract In large‐eddy simulations, subgrid‐scale (SGS) processes are parameterized as a function of filtered grid‐scale variables. First‐order, algebraic SGS models are based on the eddy‐viscosity assumption, which does not always hold for turbulence. Here we apply supervised deep neural networks (DNNs) to learn SGS stresses from a set of neighboring coarse‐grained velocity from direct numerical simulations of the convective boundary layer at friction Reynolds numbersReτup to 1243 without invoking the eddy‐viscosity assumption. The DNN model was found to produce higher correlation between SGS stresses compared to the Smagorinsky model and the Smagorinsky‐Bardina mixed model in the surface and mixed layers and can be applied to different grid resolutions and various stability conditions ranging from near neutral to very unstable. The DNN model can capture key statistics of turbulence ina posteriori(online) tests when applied to large‐eddy simulations of the atmospheric boundary layer. 
    more » « less
  2. The transport and deposition of firebrand particles is an important fire spread mechanism in wildland fires. These particles can be transported by wind over large distances and can ignite secondary fires upon landing. The transport of firebrands by wind is a complex, multiscale process that is largely controlled by interactions between the firebrand particles and the atmospheric wind. To account for the complex temporal evolution of atmospheric turbulence over large scales, the use of large-eddy simulation (LES) techniques is necessary. However, filtering of subgrid-scale (SGS) turbulence in LES hinders the accuracy of particle transport models. In this work, we employ a Lagrangian SGS model in an LES framework to investigate the effects of small-scale turbulence on the transport of mass- and size-changing firebrand particles. The impact of SGS turbulence was analyzed by comparing landing and trajectory statistics for firebrand and regular (fixed size and mass) particles under different Stokes numbers. It was found that the presence of SGS turbulence modifies the particle transport behavior, which is characterized by smaller spanwise dispersions but larger travel distances along the streamwise direction compared with particles under no SGS turbulence. As expected, the enhanced velocity field produced by the SGS model has larger influence on the statistics of firebrand particles compared with regular particles due to the time-evolving reduction in particle mass and size induced by pyrolysis. 
    more » « less
  3. We developed a novel autonomously dynamic nonlocal turbulence model for the large and very large eddy simulation (LES, VLES) of homogeneous isotropic turbulent flows. The model is based on a generalized (integer-to-noninteger)-order Laplacian of the filtered velocity field, and a novel dynamic model has been formulated to avoid the need for tuning the model constant. Three data-driven approaches were introduced for the determination of the fractional-order to have a model that is totally free of any tuning parameter. Our analysis includes both the a priori and the a posteriori tests. In the former test, using a high-fidelity and well-resolved dataset from direct numerical simulations (DNSs), we computed the correlation coefficients for the stress components of the subgrid-scale (SGS) stress tensor and the one we get directly from the DNS results. Moreover, we compared the probability density function of the ensemble-averaged SGS forces for different filter sizes. In the latter, we employed our new model along with other conventional models including the static and dynamic Smagorinsky models into our pseudo-spectral solver and tested the final predicted quantities. The results of the newly developed model exhibit an expressive agreement with the ground-truth DNS results in all components of the SGS stress and forces. Also, the model exhibits promising results in the VLES region as well as the LES region, which could be remarkably important for cost-efficient nonlocal turbulence modeling, e.g., in meteorological and environmental applications. 
    more » « less
  4. Hurricanes are among the costliest natural disasters in the United States and regularly inflict severe damage on urban infrastructure. Accurate forecasts are therefore essential for preparedness and limiting these extreme events' economic toll. Numerical weather‑prediction (NWP) models—such as the Weather Research and Forecasting (WRF) system—are powerful forecasting tools. However, some of their physical parameterizations were neither designed for nor tested with real hurricanes. This thesis addresses that gap by evaluating two key parameterizations in WRF: (i) subgrid‑scale (SGS) turbulence schemes and (ii) surface‑roughness and urban canopy treatments. The first part of the study investigates how SGS eddy‑viscosity choices affect hurricane intensity, turbulence, and wind profiles. Large‑eddy simulations (LES) of five major hurricanes were run with a 1.5‑order, three‑dimensional turbulent‑kinetic‑energy (TKE) SGS scheme. Each storm was simulated under three eddy‑viscosity settings— default, halved, and doubled—yielding 15 cases. A parallel set of 10 cases employed an alternative nonlinear backscatter and anisotropy (NBA) SGS scheme. Two idealized LES runs and one fine-grid (~80 m) nested simulation brought the total to 33. Reducing SGS stress intensified storms by raising boundary‑layer wind speeds and lowering the altitude of peak winds, improving surface‑wind forecasts by ~9 % and minimum sea‑level pressure by ~29 % relative to the default setting. These results reveal that standard SGS models are overly dissipative because they overlook the rotational suppression of turbulence, underscoring the need for SGS schemes tailored to hurricane dynamics. The second part assesses how aerodynamic roughness length (z0) and urban‑canopy schemes shape near‑surface winds over cities. For four land‑falling hurricanes affecting Houston and New Orleans, increasing z0 in the Single‑Layer Urban Canopy Model (SLUCM) reduced modeled wind speeds and cut mean absolute error (MAE) by ~20 %, whereas decreasing z0 introduced large positive biases. Additional experiments compared three urban options—Bulk (no‑urban), SLUCM, and the multi‑layer Building Energy Model (BEM). The Bulk scheme delivered the most accurate surface‑wind forecasts in every nested domain, while SLUCM slightly outperformed BEM in the limited vertical‑profile data. These findings highlight the need to recalibrate urban schemes and surface‑drag parameters when applying WRF to hurricane‑force winds. 
    more » « less
  5. In this study, we conduct a parametric analysis to evaluate the sensitivities of wall-modeled large-eddy simulation (LES) with respect to subgrid-scale (SGS) models, mesh resolution, wall boundary conditions and mesh anisotropy. While such investigations have been conducted for attached/flat-plate flow configurations, systematic studies specifically targeting turbulent flows with separation are notably sparse. To bridge this gap, our study focuses on the flow over a two-dimensional Gaussian-shaped bump at a moderately high Reynolds number, which involves smooth-body separation of a turbulent boundary layer under pressure-gradient and surface- curvature effects. In the simulations, the no-slip condition at the wall is replaced by three different forms of boundary condition based on the thin boundary layer equations and the mean wall-shear stress from high-fidelity numerical simulation to avoid the additional complexity of modeling the wall-shear stress. Various statistics, including the mean separation bubble size, mean velocity profile, and dissipation from SGS model, are compared and analyzed. The results reveal that capturing the separation bubble strongly depends on the choice of SGS model. While simulations approach grid convergence with resolutions nearing those of wall-resolved LES meshes, above this limit, the LES predictions exhibit intricate sensitivities to mesh resolution. Furthermore, both wall boundary conditions and the anisotropy of mesh cells exert discernible impacts on the turbulent flow predictions, yet the magnitudes of these impacts vary based on the specific SGS model chosen for the simulation. 
    more » « less