An official website of the United States government
Abstract The chemical stability of 2D MXene nanosheets in aqueous dispersions must be maintained to foster their widespread application. MXene nanosheets react with water, which results in the degradation of their 2D structure into oxides and carbon residues. The latter detrimentally restricts the shelf life of MXene dispersions and devices. However, the mechanism of MXene degradation in aqueous environment has yet to be fully understood. In this work, the oxidation kinetics is investigated of Ti3C2Txand Ti2CTxin aqueous media as a function of initial pH values, ionic strengths, and nanosheet concentrations. The pH value of the dispersion is found to change with time as a result of MXene oxidation. Specifically, MXene oxidation is accelerated in basic media by their reaction with hydroxyl anions. It is also demonstrated that oxidation kinetics are strongly dependent on nanosheet dispersion concentration, in which oxidation is accelerated for lower MXene concentrations. Ionic strength does not strongly affect MXene oxidation. The authors also report that citric acid acts as an effective antioxidant and mitigates the oxidation of both Ti3C2Txand Ti2CTxMXenes. Reactive molecular dynamic simulations suggest that citric acid associates with the nanosheet edge to hinder the initiation of oxidation.
more »
« less
Selective Oxidation of Benzo[d]isothiazol-3(2H)-Ones Enabled by Selectfluor
A metal-free and Selectfluor-mediated selective oxidation reaction of benzo[d]isothiazol-3(2H)-ones in aqueous media is presented. This novel strategy provides a facile, green, and efficient approach to access important benzo[d]isothiazol-3(2H)-one-1-oxides with excellent yields and high tolerance to various functional groups. Furthermore, the purification of benzoisothiazol-3-one-1-oxides does not rely on column chromatography. Moreover, the preparation of saccharine derivatives has been achieved through sequential, double oxidation reactions in a one-pot aqueous media.
more »
« less
- Award ID(s):
- 2029932
- PAR ID:
- 10553798
- Publisher / Repository:
- MDPI
- Date Published:
- Journal Name:
- Molecules
- Volume:
- 29
- Issue:
- 16
- ISSN:
- 1420-3049
- Page Range / eLocation ID:
- 3899
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Photodeoxygenation of dibenzothiopheneS‐oxide (DBTO) is believed to produce ground‐state atomic oxygen [O(3P)] in solution. Compared with other reactive oxygen species (ROS), O(3P) is a unique oxidant as it is potent and selective. Derivatives of DBTO have been used as O(3P)‐precursors to oxidize variety of molecules, including plasmid DNA, proteins, lipids, thiols, and other small organic molecules. Unfortunately, the photodeoxygenation of DBTO requires ultraviolet irradiation, which is not an ideal wavelength range for biological systems, and has a low quantum yield of approximately 0.003. In this work, benzo[b]naphtho[1,2‐d]selenopheneSe‐oxide, benzo[b]naphtho[2,1‐d]selenopheneSe‐oxide, dinaphtho[2,3‐b:2’,3’‐d]selenopheneSe‐oxide, and perylo[1,12‐b,c,d]selenopheneSe‐oxide were synthesized, and their ability to utilize visible light for generating O(3P) was interrogated. Benzo[b]naphtho[1,2‐d]selenopheneSe‐oxide produces O(3P) upon irradiation centered at 420 nm. Additionally, benzo[b]naphtho[1,2‐d]selenopheneSe‐oxide, benzo[b]naphtho[2,1‐d]selenopheneSe‐oxide, and dinaphtho[2,3‐b:2’,3’‐d]selenopheneSe‐oxide produce O(3P) when irradiated with UVA light and have quantum yields of photodeoxygenation ranging from 0.009 to 0.33. This work increases the utility of photodeoxygenation by extending the range of wavelengths that can be used to generate O(3P) in solution.more » « less
-
Abstract Meso‐nitrile oxide group in 1,7‐Diphenyl‐containing BODIPYs can be involved in highly unusual [3+2] intramolecular cycloaddition reaction with the formation of the dihydrobenzo[d]isoxazole‐containing BODIPYs. Oxidation of these compounds results in the formation of unprecedented either benzisoxazole‐ or benzo[b]azepine‐fused fully conjugated NIR absorbing BODIPYs. The photophysical properties and electronic structures of the target compounds were studied by an array of experimental and theoretical methods.more » « less
-
Abstract MXenes are 2D materials with great potential in various applications. However, the degradation of MXenes in humid environments has become a main obstacle in their practical use. Here we combine deep neural networks and an active learning scheme to develop a neural network potential (NNP) for aqueous MXene systems with ab initio precision but low cost. The oxidation behaviors of super large aqueous MXene systems are investigated systematically at nanosecond timescales for the first time. The oxidation process of MXenes is clearly displayed at the atomic level. Free protons and oxides greatly inhibit subsequent oxidation reactions, leading to the degree of oxidation of MXenes to exponentially decay with time, which is consistent with the oxidation rate of MXenes measured experimentally. Importantly, this computational study represents the first exploration of the kinetic process of oxidation of super‐sized aqueous MXene systems. It opens a promising avenue for the future development of effective protection strategies aimed at controlling the stability of MXenes.more » « less
-
null (Ed.)Nickel nitride (Ni 3 N) is known as one of the promising precatalysts for the electrochemical oxygen evolution reaction (OER) under alkaline conditions. Due to its relatively low oxidation resistance, Ni 3 N is electrochemically self-oxidized into nickel oxides/oxyhydroxides (electroactive sites) during the OER. However, we lack a full understanding of the effects of Ni 3 N self-oxidation and Fe impurity incorporation into Ni 3 N from electrolyte towards OER activity. Here, we report on our examination of the compositional and structural transformation of Ni 3 N precatalyst layers on Ni foams (Ni 3 N/Ni foam) during extended periods of OER testing in Fe-purified and unpurified KOH media using both a standard three-electrode cell and a flow cell, and discuss their electrocatalytic properties. After the OER tests in both KOH media, the Ni 3 N surfaces were converted into amorphous, nano-porous nickel oxide/(oxy)hydroxide surfaces. In the Fe-purified electrolyte, a decrease in OER activity was confirmed after the OER test because of the formation of pure NiOOH with low OER activity and electrical conductivity. Conversely, in the unpurified electrolyte, a continuous increase in OER activity was observed over the OER testing, which may have resulted from the Fe incorporation into the self-oxidation-formed NiOOH. Our experimental findings revealed that Fe impurities play an essential role in obtaining notable OER activity using the Ni 3 N precatalyst. Additionally, our Ni 3 N/Ni foam electrode exhibited a low OER overpotential of 262 mV to reach a geometric current density of 10 mA cm geo −2 in a flow cell with unpurified electrolyte.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/molecules29163899
