More Like this

1. Extreme ductile thinning of Cambrian marbles in the footwall of the Northern Snake Range metamorphic core complex, Nevada: implications for extension magnitude and structural evolution

   Long, SP; Lee, J; Blackford, NR (May 2024, Geological Society of America)

   NA (Ed.)

   Documenting the geometry, magnitude and kinematics of ductile deformation provides important insights into the structural and rheological evolution of continental lithosphere. The Northern Snake Range metamorphic core complex in eastern Nevada provides an exceptional opportunity to investigate the geometry and magnitude of ductile strain during high-magnitude continental extension. Decades of mapping-based research has provided exceptional stratigraphic context for the footwall of the low-angle, top-down-to-ESE, normal-sense Northern Snake Range dècollement (NSRD). In the northern part of the range, Middle-Late Cambrian marble units in the NSRD footwall, which have a cumulative stratigraphic thickness of 1107 ± 107 m in adjacent ranges, were ductilely thinned during Late Eocene-Late Oligocene extension. From west to east across the range, these rocks have been thinned from 869-935-m-thick (15-21% structural thinning) to 54-88 m-thick (92-95% structural thinning) across a 12 km lineation-parallel distance. Ductile extensional strain was accompanied by the development of pervasive linear-planar fabrics and produced megaboudins of calcareous schist units that are ~100-500-m-long, ~15-25-m-thick, and separated by as much as ~1000 m. The magnitude of subhorizontal, ESE-directed, lineation-parallel ductile extension increases eastward across the range from 24 ± 21% to 1226 ± 256%, and total ductile extension across the range is 12.1 ± 2.2 km (167 ± 31%). Quartz recrystallization microstructures and published calcite-dolomite thermometry indicate deformation temperatures of ~400-550 °C during initial Late Eocene-Late Oligocene ductile extensional shearing. NSRD footwall rocks in the eastern part of the range experienced a longer ductile extensional strain history and a prolonged residence time at higher temperatures compared to the western part of the range. This was facilitated by the progressive eastward migration of denudation-related cooling and was likely enhanced by shear heating that scaled eastward with strain magnitude, and/or a possible eastward increase in burial depth. These factors promoted the development of the extreme ductile strain gradient in the NSRD footwall across the Northern Snake Range. 

   more » « less
2. Preliminary 1:200,000 scale geologic map of the Bhaba Pass-Pin Valley region, Himachal Himalaya, NW India

   https://doi.org/10.1130/abs/2024AM-401981  

   Vlaha, Dominik; Genge, Marie C; Ganbat, Ariuntsetseg; Branton, Evon; Zuza, Andrew; Haproff, Peter J; Reyes, Francisco; Guevara, Victor; Webb, A Alexander; Singh, Birendra P (January 2024, Geological Society of America Abstracts with Programs)

   Tectonic models for the development of the Himalaya, Earth's largest active collisional mountain belt, have been developed and tested through pressure, temperature, and time (P-T-t) information collected from exposed metamorphic rocks. Inferred deep burial and subsequent exhumation of these rocks are usually justified by observable structures (e.g., Main Central thrust) and mapping relationships. However, regions where pressure estimates are at odds with field-based reconstructions are reconciled with hypothesized cryptic structures that have since been completely eroded. Such field versus thermobarometric discrepancies significantly impact interpretations on the geometry, magnitude, and distribution of deformation. Here, we conducted detailed field mapping of the Paleogene Tethyan fold-thrust belt in the Himachal Himalaya, NW India, which is the structurally highest part of the Himalayan orogen and deforms a ~10–15 km thick Neoproterozoic–Cretaceous passive margin section. In this region, P-T estimates yield 6–8 kbar and ~650°C, which suggests burial to depths of ~25–30 km. To assess the viability of this deep burial, we constructed a 1:200,000 scale geologic map of the Bhaba Pass-Pin Valley region. Geologic mapping was focused on the stratigraphy, structural configuration, and metamorphic isograds of the basal Tethyan strata. Detailed field mapping aided the construction of balanced cross sections, which guided subsequent multi-method analytical approaches that fit into a coherent structural framework. Our field observations and map relationships show no major structures, abrupt changes in metamorphic grade or composition that would suggest deep burial of the stratigraphically continuous basal Tethyan group. Balanced cross sections throughout the study area suggest moderate amounts of shortening strain (~30–36%). This contribution highlights the importance of detailed field mapping to interpret P-T estimates. Ongoing analytical methods are being conducted to constrain the thermal architecture and metamorphic history of the Tethyan fold-thrust belt. 

   more » « less
3. Ductile strain in the footwall of the Northern Snake Range metamorphic core complex, eastern Nevada, USA: implications for its structural evolution

   Blackford, NR; Long, SP; Lee, J; Stevens, J (October 2022, Geological Society of America)

   The geometry and magnitude of finite strain in the ductile footwalls of metamorphic core complexes are important parameters for testing the predictions of models of extension, yet are often difficult to quantify due to the rare preservation of deformed markers. The footwall of the Northern Snake Range core complex in eastern Nevada preserves a coherent stratigraphy of ductilely thinned Neoproterozoic-Cambrian metasedimentary rocks that are exposed over a 30 km transport-parallel distance, and thus provides an important opportunity to quantify footwall strain. We measured strain ellipsoids from stretched detrital quartz grains and ribbons in 45 samples that span the full exposed distance of the ductilely sheared footwall of the master detachment fault (the Northern Snake Range décollement), and we combined our data with 11 published strain ellipsoids. On the eastern side of the range, where recrystallization limits the preservation of detrital quartz grains, we estimated finite strain by comparing the attenuated thicknesses of Neoproterozoic-Cambrian rock units to their regional stratigraphic thicknesses. Our data demonstrate a dramatic gradient in ductile strain in the transport direction, from 39% subhorizontal extension and 32% subvertical thinning at the western flank of the Northern Snake Range to 450-1440% extension and 81-94% thinning at the eastern flank. The footwall underwent 18-20 km of cumulative ductile extension, which is equivalent to 38-43% of the 47 km of total extension accommodated on brittle structures. Kinematic vorticity estimates from published quartz petrofabrics define an eastward-increasing component of top-to-the-ESE simple shear. Our data are compatible with a rolling hinge model of extension, where displacement on a low-angle, upper-crustal, brittle detachment fault system was fed downward to a zone of distributed, simple shear-dominant, top-down-to-ESE ductile shearing beneath the quartz crystal-plastic transition. The progressive eastward translation and brittle thinning of the hanging wall resulted in the eastward migration of exhumation of footwall rocks. Migrating exhumation may in part be responsible for the eastward-increasing finite strain gradient, as footwall rocks in the eastern part of the range experienced a longer strain history. 

   more » « less
4. Mid-crustal overpressure in the Tethyan Himalaya

   https://doi.org/10.5194/egusphere-egu25-11961  

   Vlaha, Dominik R; Zuza, Andrew V; Guevara, Victor E; Haproff, Peter J; Webb, A_Alexander G; Reyes, Francisco; Genge, Marie C; Ganbat, Ariuntsetseg; Wilderman, Devynn; Singh, Birendra P (March 2025, European Geosciences Union General Assembly 2025)

   Theory suggests the possibility for significant deviations between total pressure (or dynamic pressure) and lithostatic pressure during crustal metamorphism. If such deviations exist, the implications for orogenic reconstruction would be profound. Whether such non-lithostatic pressure conditions during crustal metamorphism are recorded and preserved in the rock record remains unresolved, as direct field evidence for this phenomenon is limited. Here, we investigate the Paleogene Tethyan Himalaya fold-thrust belt in Himachal Pradesh, northwestern India, which is the structurally highest part of the Himalayan orogen and deforms a ~10–15 km thick Neoproterozoic–Cretaceous passive margin stratigraphic section. Field-based kinematic studies demonstrate relatively moderate shortening strain across the Tethyan Himalaya. However, basal Tethyan strata consistently yield elevated pressure-temperature-time (P-T-t) estimates of 7–8 kbar and ~650°C, indicative of deep burial during Himalayan orogeny (ca. 20–45 Ma, 25–30 km depths). These P-T-t conditions can be reconciled by: (1) deep Cenozoic burial along cryptic structures and/or significant flattening of the Tethyan strata; (2) basal Tethyan strata recording metamorphism and deformation related to pre-Himalayan tectonism; or (3) non-lithostatic pressure conditions (i.e., tectonic overpressure). To test these models, we systematically mapped the Tethyan fold-thrust belt along the Pin Valley transect in northwestern India, a classic site for stratigraphic, paleontological, paleoenvironmental, and structural reconstructions. The Pin Valley region provides an opportunity to study a structurally continuous metamorphic field gradient from the near-surface to structural depths between 10–15 km, which should reflect P conditions ≤4 kbar if lithostatic. We integrate a multi-method approach combining detailed geologic mapping with quantitative analytical techniques (e.g., thermometry, finite strain analyses, thermo/geochronology, and thermobarometry) to quantify the magnitude, kinematics, thermal architecture, and timing of regional deformation, metamorphism, and subsequent exhumation. Results show: (1) throw on shortening structures is moderate to low (≤4 km); (2) temperature-depth relationships record a continuous, but regionally elevated, upper-crustal geothermal gradient of ≥40 °C/km, which is inconsistent with deep burial models (≤25 °C/km); (3) minimal flattening of basal Tethyan strata; (4) upper Tethyan strata yield pre-Himalayan low-temperature thermochronology dates, further refuting deep Cenozoic burial; and (5) basal Tethyan P-T-t estimates confirm elevated mid-crustal conditions of ~7 kbar, 630°C at 10–15 km depths during the Cenozoic. Preliminary volume expansion calculations are minimal; therefore, mechanisms involving non-hydrostatic thermodynamics, deviatoric stresses, rock strength contrasts, and tectonic mode switching are being explored. 

   more » « less
5. Pulsed Mesozoic Deformation in the Cordilleran Hinterland and Evolution of the Nevadaplano: Insights from the Pequop Mountains, NE Nevada

   https://doi.org/10.2113/2020/8850336  

   Zuza, Andrew V.; Thorman, Charles H.; Henry, Christopher D.; Levy, Drew A.; Dee, Seth; Long, Sean P.; Sandberg, Charles A.; Soignard, Emmanuel; Godin, ed., Laurent (July 2020, Lithosphere)

   Abstract Mesozoic crustal shortening in the North American Cordillera’s hinterland was related to the construction of the Nevadaplano orogenic plateau. Petrologic and geochemical proxies in Cordilleran core complexes suggest substantial Late Cretaceous crustal thickening during plateau construction. In eastern Nevada, geobarometry from the Snake Range and Ruby Mountains-East Humboldt Range-Wood Hills-Pequop Mountains (REWP) core complexes suggests that the ~10–12 km thick Neoproterozoic-Triassic passive-margin sequence was buried to great depths (>30 km) during Mesozoic shortening and was later exhumed to the surface via high-magnitude Cenozoic extension. Deep regional burial is commonly reconciled with structural models involving cryptic thrust sheets, such as the hypothesized Windermere thrust in the REWP. We test the viability of deep thrust burial by examining the least-deformed part of the REWP in the Pequop Mountains. Observations include a compilation of new and published peak temperature estimates (n=60) spanning the Neoproterozoic-Triassic strata, documentation of critical field relationships that constrain deformation style and timing, and new 40Ar/39Ar ages. This evidence refutes models of deep regional thrust burial, including (1) recognition that most contractional structures in the Pequop Mountains formed in the Jurassic, not Cretaceous, and (2) peak temperature constraints and field relationships are inconsistent with deep burial. Jurassic deformation recorded here correlates with coeval structures spanning western Nevada to central Utah, which highlights that Middle-Late Jurassic shortening was significant in the Cordilleran hinterland. These observations challenge commonly held views for the Mesozoic-early Cenozoic evolution of the REWP and Cordilleran hinterland, including the timing of contractional strain, temporal evolution of plateau growth, and initial conditions for high-magnitude Cenozoic extension. The long-standing differences between peak-pressure estimates and field relationships in Nevadan core complexes may reflect tectonic overpressure. 

   more » « less