An official website of the United States government
Delineations of Retrogressive Thaw Slump (RTS) expansion and light detection and ranging (LiDAR) datasets (LAS files) of RTS sites were used to model how rates of RTS change are influenced by topographic and climatic characteristics across northern Alaska. LiDAR data were collected at ten sites, where five were collected from an uncrewed aerial system (UAS) and five were collected from a terrestrial LiDAR systems (TLS). LiDAR datasets were used to bias correct the open-source ArcticDEM (2 meter-resolution) for calculating annual rates of RTS volumetric losses across all sites. RTS Delineations were used to calculate annual rates of RTS areal expansion and summarize topographic characteristics calculated from the corrected ArcticDEM. Two shapefiles were created from historic satellite and aerial imagery (1949-2021) to summarize RTS areal change across 44 slumps: AK_RTS_ExansionDelineations.shp summarizes the area of RTS expansion between two time periods and AK_RTS_Delineations.shp summarizes the total RTS outline in each year where RTS expansion occurs. LiDAR UAS and TLS data are provided as LAS files from 12 slumps (five sites) near Toolik Lake and 9 slumps (5 sites) within the Noatak National Preserve.
more »
« less
Applications of ArcticDEM for measuring volcanic dynamics, landslides, retrogressive thaw slumps, snowdrifts, and vegetation heights
Topographical changes are of fundamental interest to a wide range of Arctic science disciplines faced with the need to anticipate, monitor, and respond to the effects of climate change, including geohazard management, glaciology, hydrology, permafrost, and ecology. This study demonstrates several geomorphological, cryo- spheric, and biophysical applications of ArcticDEM – a large collection of publicly available, time-dependent digital elevation models (DEMs) of the Arctic. Our study illustrates ArcticDEM’s applicability across different disciplines and five orders of magnitude of elevation derivatives, including measuring volcanic lava flows, ice cauldrons, post-failure landslides, retrogressive thaw slumps, snowdrifts, and tundra vegetation heights. We quantified surface elevation changes in different geological settings and conditions using the time series of ArcticDEM. Following the 2014–2015 B´arðarbunga eruption in Iceland, ArcticDEM analysis mapped the lava flow field, and revealed the post-eruptive ice flows and ice cauldron dynamics. The total dense-rock equivalent (DRE) volume of lava flows is estimated to be (1431 ± 2) million m3. Then, we present the aftermath of a landslide in Kinnikinnick, Alaska, yielding a total landslide volume of (400 ± 8) × 103 m3 and a total area of 0.025 km2. ArcticDEM is further proven useful for studying retrogressive thaw slumps (RTS). The ArcticDEM-mapped RTS profile is validated by ICESat-2 and drone photogrammetry resulting in a standard deviation of 0.5 m. Volume estimates for lake-side and hillslope RTSs range between 40,000 ± 9000 m3 and 1,160,000 ± 85,000 m3, highlighting applicability across a range of RTS magnitudes. A case study for mapping tundra snow demonstrates ArcticDEM’s potential for identifying high-accumulation, late-lying snow areas. The approach proves effective in quantifying relative snow accumulation rather than absolute values (standard deviation of 0.25 m, bias of 0.41 m, and a correlation coefficient of 0.69 with snow depth estimated by unmanned aerial systems photogrammetry). Furthermore, ArcticDEM data show its feasibility for estimating tundra vegetation heights with a standard deviation of 0.3 m (no bias) and a correlation up to 0.8 compared to the light detection and ranging (LiDAR). The demonstrated capabilities of ArcticDEM will pave the way for the broad and pan-Arctic use of this new data source for many disciplines, especially when combined with other imagery products. The wide range of signals embedded in ArcticDEM underscores the potential challenges in deciphering signals in regions affected by various geological processes and environmental influences.
more »
« less
- PAR ID:
- 10554711
- Publisher / Repository:
- Science Direct
- Date Published:
- Journal Name:
- Science of Remote Sensing
- Volume:
- 9
- Issue:
- C
- ISSN:
- 2666-0172
- Page Range / eLocation ID:
- 100130
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Retrogressive thaw slumps (RTS)—thermal erosion of soil and vegetation after ground ice thaw—are increasing. Recovery of plant biomass after RTS is important for maintaining Arctic carbon (C) stocks and is regulated by nutrient availability for new plant growth. Many RTS are characterized by verdant shrub growth mid-succession, atypical of the surrounding nutrient-limited tundra. Here, we investigated the potential for internal and external sources of nitrogen (N) and phosphorus (P) to support mid-successional shrub growth at three Alaskan RTS chronosequences. We assessed patterns of soil and microbial CNP, soil NP cycling rates and stocks, N inputs via biological N2-fixation, and thaw leachate over time after disturbance. We found a clear transfer of P stocks from mineral to organic soils with increasing site age, yet insufficient N from any one source to support observed shrub growth. Instead, multiple mechanisms may have contributed to mid-successional shrub growth, including sustained N-cycling with reduced plant biomass, N leaching from undisturbed tundra, uninvestigated sources of N2-fixation, and most promising given the large resource, deep mineral soil N stocks. These potential mechanisms of N supply are critical for the regulation of the Arctic C cycle in response to an increasingly common climate-driven disturbance.more » « less
-
This dataset, called DARTS, comprises footprints of retrogressive thaw slump (RTS) identified and quantified using an automated deep learning approach in RTS hotspots across the Arctic and Subarctic permafrost regions. We utilized multispectral PlanetScope imagery with a spatial resolution of ~3 meters (m), complemented by ArcticDEM (Digital Elevation Model) and derived datasets, including slope, relative elevation, and Landsat-derived change trends. The dataset covers an area of 1.6 million square-kilometers (km²), with at least one coverage between 2021 and 2023, and provides annual coverage for approximately 900,000 km². In several highly active key sites, such as Banks Island, Peel Plateau, and Novaya Zemlya, we extended the data frequency and temporal coverage to 2018-2023. We mapped a total of more than 43,000 individual RTS and ALD, many of them multiple times. We offer two levels of datasets; Level 1: RTS footprints per image with timestamps; and Level 2: annually aggregated RTS footprints. Essential metadata includes image footprints, dataset coverage, timestamps, and model-specific information. To enhance reproducibility and further use, the training labels, processing code, and model checkpoints are publicly available. This version, v1.1, is the revised first openly accessible release. The dataset will be maintained and continuously updated in both spatial and temporal extent. It can be used for mapping and quantifying RTS, analyzing spatio-temporal patterns of RTS dynamics, or serving as input for landscape dynamics models.more » « less
-
null (Ed.)In a warming Arctic, permafrost-related disturbances, such as retrogressive thaw slumps (RTS), are becoming more abundant and dynamic, with serious implications for permafrost stability and bio-geochemical cycles on local to regional scales. Despite recent advances in the field of earth observation, many of these have remained undetected as RTS are highly dynamic, small, and scattered across the remote permafrost region. Here, we assessed the potential strengths and limitations of using deep learning for the automatic segmentation of RTS using PlanetScope satellite imagery, ArcticDEM and auxiliary datasets. We analyzed the transferability and potential for pan-Arctic upscaling and regional cross-validation, with independent training and validation regions, in six different thaw slump-affected regions in Canada and Russia. We further tested state-of-the-art model architectures (UNet, UNet++, DeepLabv3) and encoder networks to find optimal model configurations for potential upscaling to continental scales. The best deep learning models achieved mixed results from good to very good agreement in four of the six regions (maxIoU: 0.39 to 0.58; Lena River, Horton Delta, Herschel Island, Kolguev Island), while they failed in two regions (Banks Island, Tuktoyaktuk). Of the tested architectures, UNet++ performed the best. The large variance in regional performance highlights the requirement for a sufficient quantity, quality and spatial variability in the training data used for segmenting RTS across diverse permafrost landscapes, in varying environmental conditions. With our highly automated and configurable workflow, we see great potential for the transfer to active RTS clusters (e.g., Peel Plateau) and upscaling to much larger regions.more » « less
-
This dataset, called DARTS, comprises footprints of retrogressive thaw slump (RTS) and active layer detachments slides (ALD) identified and quantified using an automated deep learning approach in RTS hotspots across the Arctic and Subarctic permafrost regions. We utilized multispectral PlanetScope imagery with a spatial resolution of 3 meters (m), complemented by ArcticDEM (Digital Elevation Models) and derived datasets, including slope, relative elevation, and Landsat-derived change trends. The dataset covers an area of 1.6 million square-kilometers (km²), with at least one coverage between 2021 and 2023, and provides annual coverage for approximately 900,000 km². In several highly active key sites, such as Banks Island, Peel Plateau, and Novaya Zemlya, we extended the data frequency and temporal coverage to 2018-2023. We mapped a total of more than 43,000 individual RTS and ALD, many of them multiple times. We offer two levels of datasets; Level 1: RTS footprints per image with timestamps; and Level 2: annually aggregated RTS footprints. Essential metadata includes image footprints, dataset coverage, timestamps, and model-specific information. To enhance reproducibility and further use, the training labels, processing code, and model checkpoints are publicly available. This version, v1, is the first openly accessible release. The dataset will be maintained and continuously updated in both spatial and temporal extent. It can be used for mapping and quantifying RTS, analyzing spatio-temporal patterns of RTS dynamics, or serving as input for landscape dynamics models.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1016/j.srs.2024.100130
