skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Sustainable Soft Electronics Combining Recyclable Metal Nanowire Circuits and Biodegradable Gel Film Substrates
Abstract Direct disposal of used soft electronics into the environment can cause severe pollution to the ecosystem due to the inability of most inorganic materials and synthetic polymers to biodegrade. Additionally, the loss of the noble metals that are commonly used in soft electronics leads to a waste of scarce resources. Thus, there is an urgent need to develop “green” and sustainable soft electronics based on eco‐friendly manufacturing that may be recycled or biodegraded after the devices’ end of life. Here an approach to fabricating sustainable soft electronics is demonstrated where the expensive functional materials can be recycled and the soft substrate can be biodegradable. A stretchable agarose/glycerol gel film is used as the substrate, and silver nanowires (AgNWs) are printed on the film to fabricate the soft electronic circuits. The mechanical and chemical properties of the agarose/glycerol gel films are characterized, and the functionality of the printed AgNW electrodes for electrophysiological sensors is demonstrated. The demonstration of the biodegradability of the agarose/glycerol and the recyclability of AgNWs points toward ways to develop sustainable and eco‐friendly soft electronics.  more » « less
Award ID(s):
2233399 2134664
PAR ID:
10559234
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
Wiley
Date Published:
Journal Name:
Advanced Electronic Materials
Volume:
10
Issue:
6
ISSN:
2199-160X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Advanced Materials Technologies)
    Abstract The generation of electronic waste (e‐waste) poses a significant environmental challenge, necessitating strategies to extend electronics’ lifespan and incorporate eco‐friendly materials to enable their rapid degradation after disposal. Foldable electronics utilizing eco‐friendly materials offer enhanced durability during operation and degradability at the end of their life cycle. However, ensuring robust physical adhesion between electrodes/circuits and substrates during the folding process remains a challenge, leading to interface delamination and electronic failure. In this study, electrohydrodynamic (EHD) printing is employed as a cost‐effective method to fabricate the eco‐friendly foldable electronics by printing PEDOT:PSS/graphene composite circuits onto polyvinyl alcohol (PVA) films. The morphology and electrical properties of the printed patterns using inks with varying graphene and PEDOT:PSS weight ratios under different printing conditions are investigated. The foldability of the printed electronics is demonstrated, showing minimal resistance variation and stable electronic response even after four folds (16 layers) and hundreds of folding and unfolding cycles. Additionally, the application of printed PEDOT:PSS/graphene circuit is presented as a resistive temperature sensor for monitoring body temperature and respiration behavior. Furthermore, the transient features and degradation of the PEDOT:PSS/graphene/PVA based foldable electronics are explored, highlighting the potential promise as transient electronics in reducing electronic waste. 
    more » « less
  2. ; ; ; ; ; ; ; ; (, International Journal of Extreme Manufacturing)
    Abstract Covalent adaptable network (CAN) polymers doped with conductive nanoparticles are an ideal candidate to create reshapeable, rehealable, and fully recyclable electronics. On the other hand, 3D printing as a deterministic manufacturing method has a significant potential to fabricate electronics with low cost and high design freedom. In this paper, we incorporate a conductive composite consisting of polyimine CAN and multi-wall carbon nanotubes into direct-ink-writing 3D printing to create polymeric sensors with outstanding reshaping, repairing, and recycling capabilities. The developed printable ink exhibits good printability, conductivity, and recyclability. The conductivity of printed polyimine composites is investigated at different temperatures and deformation strain levels. Their shape-reforming and Joule heating-induced interfacial welding effects are demonstrated and characterized. Finally, a temperature sensor is 3D printed with defined patterns of conductive pathways, which can be easily mounted onto 3D surfaces, repaired after damage, and recycled using solvents. The sensing capability of printed sensors is maintained after the repairing and recycling. Overall, the 3D printed reshapeable, rehealable, and recyclable sensors possess complex geometry and extend service life, which assist in the development of polymer-based electronics toward broad and sustainable applications. 
    more » « less
  3. ; ; (, Advanced Sustainable Systems)
    Abstract Papertronics introduce a sustainable, cost‐effective revolution in electronics, especially for the Internet of Things. This research overcomes the traditional challenges of paper's porosity, which has impeded electronic component fabrication and performance. A novel approach that harnesses paper's natural capillary action, combined with hydrophobic wax patterning, to achieve precise vertical integration of electronic components is introduced. This method marks a significant departure from conventional surface deposition techniques. This study demonstrates the successful creation of tunable resistors, capacitors, and field‐effect transistors, embedded within a single sheet of paper. Contrary to previous assumptions that impeded the use of paper, its rough and porous texture as a strategic advantage, facilitating the precise fabrication of intricate electronic components is leveraged. Machine learning algorithms play an important role in predicting and enhancing the performance of these papertronic components. This innovation facilitates the development of compact printed circuit boards with increased circuit density, enabling the integration of diverse analog and digital circuits in either single or multi‐layer paper formats. The resulting papertronic systems exceed performance benchmarks, offering eco‐friendly disposal through biodegradability or incineration. These breakthroughs establish papertronics as a feasible, eco‐friendly alternative in the electronics industry, permitting widespread adoption and continuous innovation in sustainable electronic solutions. 
    more » « less
  4. ; ; ; (, Current Opinion in Chemical Engineering)
    Next-generation polymeric membranes must be derived from more environmentally friendly materials that have similar solubility and miscibility properties as their predecessors to form permeable and selective membranes. Bio-derived polymers, recycled plastics, and eco-friendly solvents have been demonstrated to produce membranes with similar permeability and selectivity as conventional counterparts, though matching membrane durability and cost-effectiveness remain as future research challenges. Slot die coating and 3D printing have been demonstrated to show the scalability of membrane fabrication. Life cycle assessments have become valuable tools in estimating the total environmental impacts of the manufacturing process and characterizing the sustainability of new materials. Recent advances have shortened the gap between materials innovation research and commercial application. 
    more » « less
  5. ; ; ; ; ; (, Materials Today Physics)
    We developed ultra-high energy storage density capacitors using a new class of lead-free bismuth pyrochlorebased dielectric film material systems with high breakdown strength and reliability. The 2 μm-thick pyrochlore ceramic film capacitors have demonstrated ultra-high energy densities around 90 J/cm3 with very low energy loss below 3%, which is achieved by the combination of high permittivity, pseudo-linear dielectric characteristics, and high breakdown electric field over 4.5 MV/cm. Particularly, these pyrochlore ceramic films can endure voltage strength up to ~900 V. These noteworthy pyrochlore ceramic films are fabricated by the lowcost chemical solution deposition process which allows dielectric films to be processed on standard platinized silicon wafers. This new class of capacitors can satisfy the emergent needs for significant reduction in size and weight of capacitors with high energy storage capability in power electronics, electric vehicles, and energy storage in sustainable energy systems. Our research provides a unique and economical platform for the processing of this useful pyrochlore material in large volume for eco-friendly energy applications. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email