The backward problem of plasma assisted combustion emphasizes evaluating the effect of the evolving thermochemical state on the plasma discharge. This paper investigates the dependence of avalanche to streamer to spark formation dynamics and kinetics on the gas composition and temperature at different points in an ammonia-air premixed laminar flame using a self-consistent multigrid-based 1D plasma solver. Different values of alpha, the coefficient for effective ionization events per unit length, have been reported for electron avalanches in air and stoichiometric NH3-air mixtures. The streamer inception has been shown to obey the Meek’s criterion. An exponential reduction in streamer and spark formation time has been observed from plasma simulations at different points in the unburnt, pre-heat zone, reaction zone and the fully burnt regions of the premixed flame. While the enhancement of the reduced electric field with increasing temperature affects effective ionization, there exists a minimum breakdown field for streamer formation, which does not vary proportionally with the changing number density of the gas. The change in the mixture from reactants (NH3, O2, N2) to products of complete combustion of ammonia in air (N2, H2O) has also been shown to affect the streamer and spark formation. Finally, the major pathways during the streamer and spark phases which are responsible for producing important radicals used in combustion of NH3 are also discussed.
more »
« less
1D modeling of plasma streamers at ammonia-air flame conditions
Self-consistent 1D modeling of streamers in ammonia-oxygen-nitrogen-water mixtures has been performed in this work. A fluid model that includes species transport, electrostatic potential, and detailed chemistry was developed and verified. This model is then used to simulate the avalanche, streamer formation and propagation phases, driven by a nanosecond voltage pulse, at different thermochemical conditions derived from a 1D laminar premixed ammonia-air flame. The applicability of the Meek’s criterion in predicting the streamer inception location was successfully confirmed. Streamer formation and propagation duration were found to vary significantly with different thermochemical conditions, due to the difference in ionization rates. The thermochemical state also affected the breakdown characteristics which was tested by maintaining the background reduced electric field constant. Detailed kinetic analyses revealed the importance of O(1D) in the production of key radicals, such as O, OH, and NH2. Furthermore, the contributions of the dissociative electronic excitation of NH3 towards the production of H and NH2 radicals have also been reported. Spatial and temporal evolution of the electron energy loss fractions for various inelastic collision processes at different thermochemical states uncovered the input plasma energy spent of fuel dissociation and the large variability in the dominant processes during the avalanche and streamer propagation phases. The methodology and analyses reported in this work are key towards developing effective strategies for controlled nanosecond-pulsed non-equilibrium plasma sources used for ammonia ignition and flame stabilization.
more »
« less
- Award ID(s):
- 2002635
- PAR ID:
- 10562104
- Publisher / Repository:
- IOP Publishing
- Date Published:
- Journal Name:
- Journal of Physics D: Applied Physics
- Volume:
- 58
- Issue:
- 1
- ISSN:
- 0022-3727
- Page Range / eLocation ID:
- 015204
- Subject(s) / Keyword(s):
- streamer discharge ammonia flame plasma assisted combustion fluid modeling electron energy loss fractions nanosecond pulsed plasma
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Plasma-assisted combustion (PAC) offers significant potential to enhance combustion processes by modifying thermal, kinetic, and transport properties. Despite progress in the field, challenges remain in reconciling disparate experimental results and understanding the mechanisms of plasma-flame interaction. This work develops a numerical modeling framework to systematically evaluate the impact of Nanosecond Repetitively Pulsed Discharges (NRPDs) on PAC systems. The focus of this contribution is modeling laminar premixed flames; and the main metric to assess the impact of plasma on flame is the laminar flame speed. The model is exercised on a stoichiometric methane/air flame. A combined 0D plasma-combustion model, PlasmaChem, is presented, enabling accurate energy tracking and coupling of detailed plasma and combustion mechanisms. The model is extended to 1D to incorporate compressible fluid dynamics, capturing the interaction between plasma and flame propagation. The results reveal distinct phases of plasma-flame interaction, demonstrating both beneficial effects, such as increased laminar flame speed due to radical production, and adverse effects, including flame deceleration from pressure disturbances. The model is compared to experiments in an accompanying paper, Part II of this work.more » « less
-
Plasma-assisted combustion of ammonia leverages non-equilibrium electrical discharges to modify flame dynamics and emissions. In this work, we perform a numerical investigation using a one-dimensional model to examine the influence of nanosecond-repetitively pulsed discharges on the propagation of stoichiometric ammonia-air flames at atmospheric conditions. The model incorporates detailed plasma chemistry solved with ZDPlasKin. In particular, we look into the influence of pulse repetition frequency on laminar flame speed and NOx emissions. The simulations reveal unexpected behavior in the spatial distribution of plasma energy deposition within the flame. The plasma is found to significantly speed up the flame, up to +140%, although some numerical challenges prevented us from exploring operation at higher frequencies. The chemical kinetics used also predict a small decrease in 𝑁𝑂 in the product region of the flame.more » « less
-
Abstract The ignition of plasmas in liquids has applications from medical instrumentation to manipulation of liquid chemistry. Formation of plasmas directly in a liquid often requires prohibitively large voltages to initiate breakdown. Producing plasma streamers in bubbles submerged in a liquid with higher permittivity can significantly lower the voltage needed to initiate a discharge by reducing the electric field required to produce breakdown. The proximity of the bubble to the electrodes and the shape of the bubbles play critical roles in the manner in which the plasma is produced in, and propagates through, the bubble. In this paper, we discuss results from a three-dimensional direct numerical simulation (DNS) used to investigate the shapes of bubbles formed by injection of air into water. Comparisons are made to results from a companion experiment. A two-dimensional plasma hydrodynamics model was then used to capture the plasma streamer propagation in the bubble using a static bubble geometry generated by the DNS The simulations showed two different modes for streamer formation depending on the bubble shape. In an elliptical bubble, a short electron avalanche triggered a surface ionization wave (SIWs) resulting in plasma propagating along the surface of the bubble. In a circular bubble, an electron avalanche first traveled through the middle of the bubble before two SIWs began to propagate from the point closest to the grounded electrode where a volumetric streamer intersected the surface. In an elliptical bubble approaching a powered electrode in a pin-to-pin configuration, we experimentally observed streamer behavior that qualitatively corresponds with computational results. Optical emission captured over the lifetime of the streamer curve along the path of deformed bubbles, suggesting propagation of the streamer along the liquid/gas boundary interface. Plasma generation supported by the local field enhancement of the deformed bubble surface boundaries is a mechanism that is likely responsible for initiating streamer formation.more » « less
-
Guharay, S; Wada, M (Ed.)At or near atmospheric pressure, overvolted gas breakdown results in a streamer formation. In many applications of non-thermal plasma where efficient excited species generation is critical, the streamers are quenched to prevent it from reaching the arc phase. This can be achieved by repetitive nano second pulsing or dielectric barrier discharges were the dielectric charging quenches the arc formation. In such discharges, the plasma characteristics such as electron and ion densities and the production of excited species is determined by the streamer properties. Over the past five decades, a vast amount of experimental and computational work has been accumulated to establish a well-accepted theory of streamer formation and propagation. In this article we discuss the fluid models for streamers and quantify some macroscopic properties which can inform specific applications. We discuss in detail the fluid equations needed to model streamers and several schemes of parametrization of the transport and electron collisional processes. From an application point of view, the steamer simulations are used to quantify the excited species production by electron impact. This information is used to predict the specific outcomes via the plasma chemical conversion pathways. We present results of streamer discharges for three applications which are of technological importance to illustrate this approach: Plasma-assisted combustion, remediation of toxic gases, and plasma medicine. For plasma-assisted combustion the results of hydrogen ignition are discussed since non-hydrocarbon-based fuels such as hydrogen and ammonia are potential fuel candidates to reduce greenhouse gases. For the remediation of toxic gases, we discuss the removal of SOX/NOx from flue gas. Plasma medicine is a relatively new field and repetitive nano-second pulsed discharges in a helium gas carrier shows promise as a reactive plasma source for treating biological material. We discuss the helium metastable production in a streamer discharge since this species leads to the production of OH radicals which plays an important role.more » « less
An official website of the United States government

